[PATCH 2/6] ibm_newemac: Add ET1011c PHY support

Benjamin Herrenschmidt benh at kernel.crashing.org
Thu Nov 8 19:06:58 EST 2007


This adds support for the ET1011c PHY as found on the taishan
board.

The code comes from the kernel distributed with the board by
AMCC and developped by DENX.

Signed-off-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
---

And don't ask me about using phylib, it's in plan :-)

 drivers/net/ibm_newemac/phy.c |   37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

Index: linux-work/drivers/net/ibm_newemac/phy.c
===================================================================
--- linux-work.orig/drivers/net/ibm_newemac/phy.c	2007-11-08 15:11:30.000000000 +1100
+++ linux-work/drivers/net/ibm_newemac/phy.c	2007-11-08 15:11:54.000000000 +1100
@@ -327,6 +327,42 @@ static int m88e1111_init(struct mii_phy 
 	return  0;
 }
 
+static int et1011c_init(struct mii_phy *phy)
+{
+        u16 reg_short;
+
+        reg_short = (u16)(phy_read(phy,0x16));
+        reg_short &= ~(0x7);
+        reg_short |= 0x6;       /* RGMII Trace Delay*/
+        phy_write(phy, 0x16, reg_short);
+
+        reg_short = (u16)(phy_read(phy, 0x17));
+        reg_short &= ~(0x40);
+        phy_write(phy, 0x17, reg_short);
+
+        phy_write(phy,0x1c,0x74f0);
+        return 0;
+}
+
+static struct mii_phy_ops et1011c_phy_ops = {
+        .init           = et1011c_init,
+        .setup_aneg     = genmii_setup_aneg,
+        .setup_forced   = genmii_setup_forced,
+        .poll_link      = genmii_poll_link,
+        .read_link      = genmii_read_link
+};
+
+static struct mii_phy_def et1011c_phy_def = {
+        .phy_id         = 0x0282f000,
+        .phy_id_mask    = 0x0fffff00,
+        .name           = "ET1011C Gigabit Ethernet",
+        .ops            = &et1011c_phy_ops
+};
+
+
+
+
+
 static struct mii_phy_ops m88e1111_phy_ops = {
 	.init		= m88e1111_init,
 	.setup_aneg	= genmii_setup_aneg,
@@ -344,6 +380,7 @@ static struct mii_phy_def m88e1111_phy_d
 };
 
 static struct mii_phy_def *mii_phy_table[] = {
+	&et1011c_phy_def,
 	&cis8201_phy_def,
 	&bcm5248_phy_def,
 	&m88e1111_phy_def,



More information about the Linuxppc-dev mailing list