[PATCH 0/5] Add the support for MPC8641 silicon rev 2.0 and MPC8641HPCN board 2.0

[Jon Loeliger]

On Mon, 2007-05-21 at 22:38, Zhang Wei wrote:
> Hi, Paul,
> 
> The below 5 patches add the support for MPC8641 rev 2.0 silicon and MPC8641HPCN board 2.0.
> 
>   [PATCH 1/5] Remove the errata fix codes for MPC8641 silicon ver 1.0 which is end of life.
>   [PATCH 2/5] Add uli1575 pci-bridge sector to MPC8641HPCN dts file.
>   [PATCH 3/5] Float the pci bus number on MPC8641HPCN board.
>   [PATCH 4/5] Set RC of mpc8641 to transparent bridge for transfer legacy I/O access.
>   [PATCH 5/5] Set IDE in ULI1575 to not native mode.
> 
> The MPC8641 rev 2.0 silicon fix the PCI/PCI-Express errata in rev 1.0. And the rev 1.0 silicon is end of life. So the dts tree and codes should be changes. Codes which are not compatible with PCI/PCI-Express specifications are removed. Some minor issues are fixed.
> 
> Thanks!
> 
> Best Regards,
> Zhang Wei

Paul,

I had earlier requested a "Hold" on this series of patches
until I was able to see it work on my system too.

I have now been able to  get working code here, but it
required a follow up set of 3 patches that I wrote.

So:  I will ACK these 5 from Zhang Wei, and then post
my 3 more patches.  If you would, please pick these up!

Thanks,
jdl