[PATCH 0/5] Add the support for MPC8641 silicon rev 2.0 andMPC8641HPCN board 2.0

[Zhang Wei-r63237]

Hi,

They are against to Paul's git tree and I've verified these patches
again today.

They can be applied to Paul's top git tree successfully.

Thanks!
Wei 

> -----Original Message-----
> From: Wade Farnsworth [mailto:wfarnsworth at mvista.com] 
> Sent: Wednesday, May 23, 2007 1:47 AM
> To: Zhang Wei-r63237
> Cc: paulus at samba.org; linuxppc-dev at ozlabs.org
> Subject: Re: [PATCH 0/5] Add the support for MPC8641 silicon 
> rev 2.0 andMPC8641HPCN board 2.0
> 
> On Tue, 2007-05-22 at 11:38 +0800, Zhang Wei wrote:
> > Hi, Paul,
> > 
> > The below 5 patches add the support for MPC8641 rev 2.0 
> silicon and MPC8641HPCN board 2.0.
> > 
> >   [PATCH 1/5] Remove the errata fix codes for MPC8641 
> silicon ver 1.0 which is end of life.
> >   [PATCH 2/5] Add uli1575 pci-bridge sector to MPC8641HPCN dts file.
> >   [PATCH 3/5] Float the pci bus number on MPC8641HPCN board.
> >   [PATCH 4/5] Set RC of mpc8641 to transparent bridge for 
> transfer legacy I/O access.
> >   [PATCH 5/5] Set IDE in ULI1575 to not native mode.
> > 
> > The MPC8641 rev 2.0 silicon fix the PCI/PCI-Express errata 
> in rev 1.0. And the rev 1.0 silicon is end of life. So the 
> dts tree and codes should be changes. Codes which are not 
> compatible with PCI/PCI-Express specifications are removed. 
> Some minor issues are fixed.
> > 
> > Thanks!
> > 
> > Best Regards,
> > Zhang Wei
> > 
> 
> I can't get your patches to apply to Paulus' tree.  Which 
> tree are these
> against?
> 
> --Wade
> 
>