[PATCH 2.6.21-rt2] PowerPC: decrementer clockevent driver

[Sergei Shtylyov]

Hello.

Benjamin Herrenschmidt wrote:

>>>>Yes, on some implementations there can be other conditions that
>>>>make a decrementer exception go away; there is no contradiction
>>>>here (thankfully).  My wording was sloppy.

>>>Some CPUs have the DEC exceptions basically edge triggered (yeah I know

>>for example?

>>>it sucks). That's why, among others, the IRQ soft-disable code has code
>>>to re-trigger DEC exceptions ASAP (by setting it to 1.. note that we
>>>could probably use 0 here, we've been a bit conservative).

    Yeah, the classic decrementer is programmed off-by-one.

> I'm not 100% certain... Paulus thinks all the old 6xx are like that, and
> maybe POWER4. If I look at the oldest BookIV I can find (the 601), it

    From the "PowerPC Operating Environment Architecture" that I've already 
quoated t follows that POWER4-compatible decremented exception *must* be edge 
triggered.

> says that an exception is generated when the MSB transitions from 0 to
> 1. It's not clear wether the exception sticks while that bit is 1 or is

    Freescale MPC 7450 manual says the same, for example.

> indeed considered as an "edge" event that gets cleared as soon as
> delivered.

> Ben.

WBR, Sergei