[PATCH] pasemi: Electra CF driver
Olof Johansson
olof at lixom.net
Tue May 15 14:45:15 EST 2007
Driver for the CompactFlash slot on the PA Semi Electra eval board. It's
a simple device sitting on localbus, with interrupts and detect/voltage
control over GPIO.
The driver is implemented as an of_platform driver, and adds localbus
as a bus being probed by the of_platform framework.
Signed-off-by: Olof Johansson <olof at lixom.net>
---
Updated based on review comments from Russell, as well as retooled for
the I/O space changes (as discussed with Arnd/BenH).
This patch depends on the PCMCIA pcmcia_bus_type export to compile:
http://lists.infradead.org/pipermail/linux-pcmcia/2007-May/004628.html
and on the ioaddr_t change to work at runtime:
http://patchwork.ozlabs.org/linuxppc/patch?id=11147
Also, had to switch to bool config option since the iospace functions
aren't exported (starting with .23 we should be able to switch back to
tristate). Keep all the module init/remove calls for now.
Index: powerpc/drivers/pcmcia/Kconfig
===================================================================
--- powerpc.orig/drivers/pcmcia/Kconfig
+++ powerpc/drivers/pcmcia/Kconfig
@@ -270,6 +270,13 @@ config AT91_CF
Say Y here to support the CompactFlash controller on AT91 chips.
Or choose M to compile the driver as a module named "at91_cf".
+config ELECTRA_CF
+ bool "Electra CompactFlash Controller"
+ depends on PCMCIA=y && PPC_PASEMI
+ help
+ Say Y here to support the CompactFlash controller on the
+ PA Semi Electra eval board.
+
config PCCARD_NONSTATIC
tristate
Index: powerpc/drivers/pcmcia/Makefile
===================================================================
--- powerpc.orig/drivers/pcmcia/Makefile
+++ powerpc/drivers/pcmcia/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_PCMCIA_VRC4171) += vrc417
obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
obj-$(CONFIG_OMAP_CF) += omap_cf.o
obj-$(CONFIG_AT91_CF) += at91_cf.o
+obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
sa11xx_core-y += soc_common.o sa11xx_base.o
pxa2xx_core-y += soc_common.o pxa2xx_base.o
Index: powerpc/drivers/pcmcia/electra_cf.c
===================================================================
--- /dev/null
+++ powerpc/drivers/pcmcia/electra_cf.c
@@ -0,0 +1,382 @@
+/*
+ * Copyright (C) 2007 PA Semi, Inc
+ *
+ * Maintained by: Olof Johansson <olof at lixom.net>
+ *
+ * Based on drivers/pcmcia/omap_cf.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <pcmcia/ss.h>
+#include <asm/of_platform.h>
+
+static const char driver_name[] = "electra-cf";
+
+struct electra_cf_socket {
+ struct pcmcia_socket socket;
+
+ struct timer_list timer;
+ unsigned present:1;
+ unsigned active:1;
+
+ struct of_device *ofdev;
+ unsigned long mem_phys;
+ void __iomem * mem_base;
+ unsigned long mem_size;
+ void __iomem * io_virt;
+ unsigned int io_base;
+ unsigned int io_size;
+ u_int irq;
+ struct resource iomem;
+ void __iomem * gpio_base;
+ int gpio_detect;
+ int gpio_vsense;
+ int gpio_3v;
+ int gpio_5v;
+};
+
+#define POLL_INTERVAL (2 * HZ)
+
+
+static int electra_cf_present(struct electra_cf_socket *cf)
+{
+ unsigned int gpio;
+
+ gpio = in_le32(cf->gpio_base+0x40);
+ return !(gpio & (1 << cf->gpio_detect));
+}
+
+static int electra_cf_ss_init(struct pcmcia_socket *s)
+{
+ return 0;
+}
+
+/* the timer is primarily to kick this socket's pccardd */
+static void electra_cf_timer(unsigned long _cf)
+{
+ struct electra_cf_socket *cf = (void *) _cf;
+ int present = electra_cf_present(cf);
+
+ if (present != cf->present) {
+ cf->present = present;
+ pcmcia_parse_events(&cf->socket, SS_DETECT);
+ }
+
+ if (cf->active)
+ mod_timer(&cf->timer, jiffies + POLL_INTERVAL);
+}
+
+static irqreturn_t electra_cf_irq(int irq, void *_cf)
+{
+ electra_cf_timer((unsigned long)_cf);
+ return IRQ_HANDLED;
+}
+
+static int electra_cf_get_status(struct pcmcia_socket *s, u_int *sp)
+{
+ struct electra_cf_socket *cf;
+
+ if (!sp)
+ return -EINVAL;
+
+ cf = container_of(s, struct electra_cf_socket, socket);
+
+ /* NOTE CF is always 3VCARD */
+ if (electra_cf_present(cf)) {
+ struct electra_cf_socket *cf;
+
+ *sp = SS_READY | SS_DETECT | SS_POWERON | SS_3VCARD;
+ cf = container_of(s, struct electra_cf_socket, socket);
+ s->pci_irq = cf->irq;
+ } else
+ *sp = 0;
+ return 0;
+}
+
+static int electra_cf_set_socket(struct pcmcia_socket *sock,
+ struct socket_state_t *s)
+{
+ unsigned int gpio;
+ unsigned int vcc;
+ struct electra_cf_socket *cf;
+
+ cf = container_of(sock, struct electra_cf_socket, socket);
+
+ /* "reset" means no power in our case */
+ vcc = (s->flags & SS_RESET) ? 0 : s->Vcc;
+
+ switch (vcc) {
+ case 0:
+ gpio = 0;
+ break;
+ case 33:
+ gpio = (1 << cf->gpio_3v);
+ break;
+ default:
+ /* CF is 3.3V only */
+ return -EINVAL;
+ }
+
+ gpio |= 1 << (cf->gpio_3v + 16); /* enwr */
+ gpio |= 1 << (cf->gpio_5v + 16); /* enwr */
+ out_le32(cf->gpio_base+0x90, gpio);
+
+ pr_debug("%s: Vcc %d, io_irq %d, flags %04x csc %04x\n",
+ driver_name, s->Vcc, s->io_irq, s->flags, s->csc_mask);
+
+ return 0;
+}
+
+static int electra_cf_set_io_map(struct pcmcia_socket *s,
+ struct pccard_io_map *io)
+{
+ return 0;
+}
+
+static int electra_cf_set_mem_map(struct pcmcia_socket *s,
+ struct pccard_mem_map *map)
+{
+ struct electra_cf_socket *cf;
+
+ if (map->card_start)
+ return -EINVAL;
+ cf = container_of(s, struct electra_cf_socket, socket);
+ map->static_start = cf->mem_phys;
+ map->flags &= MAP_ACTIVE|MAP_ATTRIB;
+ if (!(map->flags & MAP_ATTRIB))
+ map->static_start += 0x800;
+ return 0;
+}
+
+static struct pccard_operations electra_cf_ops = {
+ .init = electra_cf_ss_init,
+ .get_status = electra_cf_get_status,
+ .set_socket = electra_cf_set_socket,
+ .set_io_map = electra_cf_set_io_map,
+ .set_mem_map = electra_cf_set_mem_map,
+};
+
+static int __devinit electra_cf_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct device *device = &ofdev->dev;
+ struct device_node *np = ofdev->node;
+ struct electra_cf_socket *cf;
+ struct resource mem, io;
+ int status;
+ const unsigned int *prop;
+ int err;
+
+ err = of_address_to_resource(np, 0, &mem);
+ if (err)
+ return -EINVAL;
+
+ err = of_address_to_resource(np, 1, &io);
+ if (err)
+ return -EINVAL;
+
+ cf = kzalloc(sizeof *cf, GFP_KERNEL);
+ if (!cf)
+ return -ENOMEM;
+
+ init_timer(&cf->timer);
+ cf->timer.function = electra_cf_timer;
+ cf->timer.data = (unsigned long) cf;
+
+ cf->ofdev = ofdev;
+ cf->mem_phys = mem.start;
+ cf->mem_base = ioremap(mem.start, mem.end - mem.start);
+ cf->io_size = PAGE_ALIGN(io.end - io.start);
+
+ cf->io_virt = reserve_phb_iospace(cf->io_size);
+
+ cf->gpio_base = ioremap(0xfc103000, 0x1000);
+ dev_set_drvdata(device, cf);
+
+ if (!cf->mem_base || !cf->io_virt || !cf->gpio_base) {
+ dev_err(device, "can't ioremap ranges\n");
+ status = -ENOMEM;
+ goto fail1;
+ }
+
+ __ioremap_explicit(io.start, (unsigned long)cf->io_virt, cf->io_size,
+ _PAGE_NO_CACHE | _PAGE_GUARDED);
+
+ cf->io_base = (unsigned long)cf->io_virt - VMALLOC_END;
+
+ cf->iomem.start = (unsigned long)cf->mem_base;
+ cf->iomem.end = (unsigned long)cf->mem_base + (mem.end - mem.start);
+ cf->iomem.flags = IORESOURCE_MEM;
+
+ cf->irq = irq_of_parse_and_map(np, 0);
+
+ status = request_irq(cf->irq, electra_cf_irq, IRQF_SHARED,
+ driver_name, cf);
+ if (status < 0) {
+ dev_err(device, "request_irq failed\n");
+ goto fail1;
+ }
+
+ cf->socket.pci_irq = cf->irq;
+
+ prop = get_property(np, "card-detect-gpio", NULL);
+ cf->gpio_detect = *prop;
+ prop = get_property(np, "card-vsense-gpio", NULL);
+ cf->gpio_vsense = *prop;
+ prop = get_property(np, "card-3v-gpio", NULL);
+ cf->gpio_3v = *prop;
+ prop = get_property(np, "card-5v-gpio", NULL);
+ cf->gpio_5v = *prop;
+
+ cf->socket.io_offset = cf->io_base;
+
+ /* reserve chip-select regions */
+ if (!request_mem_region(mem.start, mem.end + 1 - mem.start,
+ driver_name)) {
+ status = -ENXIO;
+ dev_err(device, "Can't claim memory region\n");
+ goto fail1;
+ }
+
+ if (!request_region(cf->io_base, cf->io_size, driver_name)) {
+ status = -ENXIO;
+ dev_err(device, "Can't claim I/O region\n");
+ goto fail2;
+ }
+
+ cf->socket.owner = THIS_MODULE;
+ cf->socket.dev.parent = &ofdev->dev;
+ cf->socket.ops = &electra_cf_ops;
+ cf->socket.resource_ops = &pccard_static_ops;
+ cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP |
+ SS_CAP_MEM_ALIGN;
+ cf->socket.map_size = 0x800;
+
+ status = pcmcia_register_socket(&cf->socket);
+ if (status < 0) {
+ dev_err(device, "pcmcia_register_socket failed\n");
+ goto fail3;
+ }
+
+ dev_info(device, "at mem 0x%lx io 0x%lx irq %d\n",
+ mem.start, io.start, cf->irq);
+
+ cf->active = 1;
+ electra_cf_timer((unsigned long)cf);
+ return 0;
+
+fail3:
+ release_mem_region(io.start, io.end + 1 - io.start);
+fail2:
+ release_mem_region(mem.start, mem.end + 1 - mem.start);
+fail1:
+ /* XXX No way to undo the io reservation at this time */
+ if (cf->mem_base)
+ iounmap(cf->mem_base);
+ if (cf->gpio_base)
+ iounmap(cf->gpio_base);
+ device_init_wakeup(&ofdev->dev, 0);
+ kfree(cf);
+ return status;
+
+}
+
+static int __devexit electra_cf_remove(struct of_device *ofdev)
+{
+ struct device *device = &ofdev->dev;
+ struct electra_cf_socket *cf;
+
+ cf = dev_get_drvdata(device);
+
+ cf->active = 0;
+ pcmcia_unregister_socket(&cf->socket);
+ free_irq(cf->irq, cf);
+ del_timer_sync(&cf->timer);
+
+ iounmap(cf->mem_base);
+ iounmap(cf->gpio_base);
+ release_mem_region(cf->mem_phys, cf->mem_size);
+ release_region(cf->io_base, cf->io_size);
+
+ kfree(cf);
+
+ return 0;
+}
+
+static int bus_notify(struct notifier_block *nb, unsigned long action,
+ void *data)
+{
+ struct device *dev = data;
+
+ printk("bus notify called\n");
+
+ /* We are only intereted in device addition */
+ if (action != BUS_NOTIFY_ADD_DEVICE)
+ return 0;
+
+ /* We use the direct ops for localbus */
+ dev->archdata.dma_ops = &dma_direct_ops;
+
+ return 0;
+}
+
+static struct notifier_block bus_notifier = {
+ .notifier_call = bus_notify,
+};
+
+static struct of_device_id electra_cf_match[] =
+{
+ {
+ .compatible = "electra-cf",
+ },
+ {},
+};
+
+static struct of_platform_driver electra_cf_driver =
+{
+ .name = (char *)driver_name,
+ .match_table = electra_cf_match,
+ .probe = electra_cf_probe,
+ .remove = electra_cf_remove,
+};
+
+static int __init electra_cf_init(void)
+{
+ bus_register_notifier(&pcmcia_bus_type, &bus_notifier);
+ return of_register_platform_driver(&electra_cf_driver);
+}
+module_init(electra_cf_init);
+
+static void __exit electra_cf_exit(void)
+{
+ bus_unregister_notifier(&pcmcia_bus_type, &bus_notifier);
+ of_unregister_platform_driver(&electra_cf_driver);
+}
+module_exit(electra_cf_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR ("Olof Johansson <olof at lixom.net>");
+MODULE_DESCRIPTION("PA Semi Electra CF driver");
+
Index: powerpc/arch/powerpc/platforms/pasemi/setup.c
===================================================================
--- powerpc.orig/arch/powerpc/platforms/pasemi/setup.c
+++ powerpc/arch/powerpc/platforms/pasemi/setup.c
@@ -205,6 +205,7 @@ static void __init pas_init_early(void)
}
static struct of_device_id pasemi_bus_ids[] = {
+ { .type = "localbus", },
{ .type = "sdc", },
{},
};
More information about the Linuxppc-dev
mailing list