[patch/rft 4/4] rtc-ds1307 platform update, powerpc mpc834x_itx and mpc8313_rdb

[David Brownell]

On Monday 14 May 2007, Olof Johansson wrote:
> On Mon, May 14, 2007 at 09:46:41AM -0700, David Brownell wrote:

> > Didn't update the pasemi reference board; public info doesn't say
> > which chip it uses.
> 
> ds1338.

OK.  The relevant updates should be evident from this patch.

Mr Grep tells me that if those powerpc platforms update along
with csb337, all current rtc-ds1307 users will be upgraded.

Then there's a separate issue of removing the old SENSORS_DS1337
driver.  Simpler IMO for those drivers to have one transition,
to new-style rtc-ds1307, not two (to old-style, then new-style).


> > NOTE:  cc'd the relevant powerpc maintainers lists; patches 1-3
> > will be archived in the rtc and i2c lists.  I'd like to see these
> > get tested/fixed so that the rtc-ds1307 driver can switch completely
> > to use the new-style I2c driver model.
> 
> Specific URLs can sometimes be useful, so we don't have to go digging
> through the archives. But thanks for the heads up, I'll make the
> corresponding changes to my code and test it out.

The URLS don't exist until after the email's gotten to the list
servers ... sort of a chicken/egg issue.

 
> (I'm guessing long-term, we will want to pull the chip info out of the
> device tree instad of have it in a table in the board code, but that's
> extra credit at the moment.)

For some definition of "long term".  ISTR seeing patches from Scott Wood
doing exactly that ... on the I2C list last November or so.  ;)

Right now my concern is how to migrate the rtc-ds1307 driver.  I'd
prefer to avoid needing to have a period where the legacy mode must
co-exist with the new-style driver support, or needing to entangle
with such tree conversions.

- Dave