[PATCH 11/13] powerpc: Add DTS file for the Motorola PrPMC2800 platform
Mark A. Greer
mgreer at mvista.com
Fri May 11 06:08:59 EST 2007
Add the device tree source file for the prpmc2800 line of processor PMCs.
Several of the property values are updated by the bootwrapper but sane
defaults have been chosen in case the bootwrapper can't determine the
exact processor board variant. The defaults should allow the kernel
to boot despite having non-optimal device tree property values.
Signed-off-by: Mark A. Greer <mgreer at mvista.com>
---
arch/powerpc/boot/dts/prpmc2800.dts | 316 ++++++++++++++++++++++++++
1 file changed, 316 insertions(+)
Index: powerpc/arch/powerpc/boot/dts/prpmc2800.dts
===================================================================
--- /dev/null
+++ powerpc/arch/powerpc/boot/dts/prpmc2800.dts
@@ -0,0 +1,316 @@
+/* Device Tree Source for Motorola PrPMC2800
+ *
+ * Author: Mark A. Greer <mgreer at mvista.com>
+ *
+ * 2007 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Property values that are labeled as "Default" will be updated by bootwrapper
+ * if it can determine the exact PrPMC type.
+ *
+ * To build:
+ * dtc -I dts -O asm -o prpmc2800.S -b 0 prpmc2800.dts
+ * dtc -I dts -O dtb -o prpmc2800.dtb -b 0 prpmc2800.dts
+ */
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "PrPMC280/PrPMC2800"; /* Default */
+ compatible = "PrPMC2800";
+ coherency-off;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,7447 {
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <2bb0b140>; /* Default (733 MHz) */
+ bus-frequency = <7f28155>; /* 133.333333 MHz */
+ timebase-frequency = <1fca055>; /* 33.333333 MHz */
+ /* Following required by dtc but not used */
+ i-cache-line-size = <0>;
+ d-cache-line-size = <0>;
+ i-cache-size = <0>;
+ d-cache-size = <0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 20000000>; /* Default (512MB) */
+ };
+
+ mv64x60 at f1000000 { /* Marvell Discovery */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ model = "mv64360"; /* Default */
+ compatible = "mv64x60";
+ clock-frequency = <7f28155>; /* 133.333333 MHz */
+ reg = <f1000000 00010000>;
+ virtual-reg = <f1000000>;
+ ranges = <88000000 88000000 01000000 /* PCI 0 I/O Space */
+ 80000000 80000000 08000000 /* PCI 0 MEM Space */
+ a0000000 a0000000 04000000 /* User FLASH */
+ 00000000 f1000000 00010000 /* Bridge's regs */
+ f2000000 f2000000 00040000>; /* Integrated SRAM */
+
+ flash at a0000000 {
+ device_type = "rom";
+ compatible = "direct-mapped";
+ reg = <a0000000 4000000>; /* Default (64MB) */
+ probe-type = "CFI";
+ bank-width = <4>;
+ partitions = <00000000 00100000 /* RO */
+ 00100000 00040001 /* RW */
+ 00140000 00400000 /* RO */
+ 00540000 039c0000 /* RO */
+ 03f00000 00100000>; /* RO */
+ partition-names = "FW Image A\0FW Config Data\0Kernel Image\0Filesystem\0FW Image B";
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "mv64x60-mdio";
+ ethernet-phy at 1 {
+ device_type = "ethernet-phy";
+ compatible = "bcm5421";
+ interrupts = <4c>; /* GPP 12 */
+ interrupt-parent = <&/mv64x60/pic>;
+ reg = <1>;
+ };
+ ethernet-phy at 3 {
+ device_type = "ethernet-phy";
+ compatible = "bcm5421";
+ interrupts = <4c>; /* GPP 12 */
+ interrupt-parent = <&/mv64x60/pic>;
+ reg = <3>;
+ };
+ };
+
+ ethernet at 2000 {
+ reg = <2000 2000>;
+ eth0 {
+ device_type = "network";
+ compatible = "mv64x60-eth";
+ block-index = <0>;
+ interrupts = <20>;
+ interrupt-parent = <&/mv64x60/pic>;
+ phy = <&/mv64x60/mdio/ethernet-phy at 1>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ eth1 {
+ device_type = "network";
+ compatible = "mv64x60-eth";
+ block-index = <1>;
+ interrupts = <21>;
+ interrupt-parent = <&/mv64x60/pic>;
+ phy = <&/mv64x60/mdio/ethernet-phy at 3>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ };
+
+ sdma at 4000 {
+ device_type = "dma";
+ compatible = "mv64x60-sdma";
+ reg = <4000 c18>;
+ virtual-reg = <f1004000>;
+ interrupt-base = <0>;
+ interrupts = <24>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ sdma at 6000 {
+ device_type = "dma";
+ compatible = "mv64x60-sdma";
+ reg = <6000 c18>;
+ virtual-reg = <f1006000>;
+ interrupt-base = <0>;
+ interrupts = <26>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ brg at b200 {
+ compatible = "mv64x60-brg";
+ reg = <b200 8>;
+ clock-src = <8>;
+ clock-frequency = <7ed6b40>;
+ current-speed = <2580>;
+ bcr = <0>;
+ };
+
+ brg at b208 {
+ compatible = "mv64x60-brg";
+ reg = <b208 8>;
+ clock-src = <8>;
+ clock-frequency = <7ed6b40>;
+ current-speed = <2580>;
+ bcr = <0>;
+ };
+
+ cunit at f200 {
+ reg = <f200 200>;
+ };
+
+ mpscrouting at b400 {
+ reg = <b400 c>;
+ };
+
+ mpscintr at b800 {
+ reg = <b800 100>;
+ virtual-reg = <f100b800>;
+ };
+
+ mpsc at 8000 {
+ device_type = "serial";
+ compatible = "mpsc";
+ reg = <8000 38>;
+ virtual-reg = <f1008000>;
+ sdma = <&/mv64x60/sdma at 4000>;
+ brg = <&/mv64x60/brg at b200>;
+ cunit = <&/mv64x60/cunit at f200>;
+ mpscrouting = <&/mv64x60/mpscrouting at b400>;
+ mpscintr = <&/mv64x60/mpscintr at b800>;
+ block-index = <0>;
+ max_idle = <28>;
+ chr_1 = <0>;
+ chr_2 = <0>;
+ chr_10 = <3>;
+ mpcr = <0>;
+ interrupts = <28>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ mpsc at 9000 {
+ device_type = "serial";
+ compatible = "mpsc";
+ reg = <9000 38>;
+ virtual-reg = <f1009000>;
+ sdma = <&/mv64x60/sdma at 6000>;
+ brg = <&/mv64x60/brg at b208>;
+ cunit = <&/mv64x60/cunit at f200>;
+ mpscrouting = <&/mv64x60/mpscrouting at b400>;
+ mpscintr = <&/mv64x60/mpscintr at b800>;
+ block-index = <1>;
+ max_idle = <28>;
+ chr_1 = <0>;
+ chr_2 = <0>;
+ chr_10 = <3>;
+ mpcr = <0>;
+ interrupts = <2a>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ i2c at c000 {
+ device_type = "i2c";
+ compatible = "mv64x60-i2c";
+ reg = <c000 20>;
+ virtual-reg = <f100c000>;
+ freq_m = <8>;
+ freq_n = <3>;
+ timeout = <3e8>; /* 1000 = 1 second */
+ retries = <1>;
+ interrupts = <25>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ pic {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ compatible = "mv64x60-pic";
+ reg = <0000 88>;
+ interrupt-controller;
+ };
+
+ mpp at f000 {
+ compatible = "mv64x60-mpp";
+ reg = <f000 10>;
+ };
+
+ gpp at f100 {
+ compatible = "mv64x60-gpp";
+ reg = <f100 20>;
+ };
+
+ pci at 80000000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "mv64x60-pci";
+ reg = <0cf8 8>;
+ ranges = <01000000 0 0 88000000 0 01000000
+ 02000000 0 80000000 80000000 0 08000000>;
+ bus-range = <0 ff>;
+ clock-frequency = <3EF1480>;
+ interrupt-pci-iack = <0c34>;
+ interrupt-parent = <&/mv64x60/pic>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0a */
+ 5000 0 0 1 &/mv64x60/pic 50
+ 5000 0 0 2 &/mv64x60/pic 51
+ 5000 0 0 3 &/mv64x60/pic 5b
+ 5000 0 0 4 &/mv64x60/pic 5d
+
+ /* IDSEL 0x0b */
+ 5800 0 0 1 &/mv64x60/pic 5b
+ 5800 0 0 2 &/mv64x60/pic 5d
+ 5800 0 0 3 &/mv64x60/pic 50
+ 5800 0 0 4 &/mv64x60/pic 51
+
+ /* IDSEL 0x0c */
+ 6000 0 0 1 &/mv64x60/pic 5b
+ 6000 0 0 2 &/mv64x60/pic 5d
+ 6000 0 0 3 &/mv64x60/pic 50
+ 6000 0 0 4 &/mv64x60/pic 51
+
+ /* IDSEL 0x0d */
+ 6800 0 0 1 &/mv64x60/pic 5d
+ 6800 0 0 2 &/mv64x60/pic 50
+ 6800 0 0 3 &/mv64x60/pic 51
+ 6800 0 0 4 &/mv64x60/pic 5b
+ >;
+ };
+
+ cpu-error at 0070 {
+ compatible = "mv64x60-cpu-error";
+ reg = <0070 10 0128 28>;
+ interrupts = <03>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ sram-ctrl at 0380 {
+ compatible = "mv64x60-sram-ctrl";
+ reg = <0380 80>;
+ interrupts = <0d>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ pci-error at 1d40 {
+ compatible = "mv64x60-pci-error";
+ reg = <1d40 40 0c28 4>;
+ interrupts = <0c>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ mem-ctrl at 1400 {
+ compatible = "mv64x60-mem-ctrl";
+ reg = <1400 60>;
+ interrupts = <11>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+ };
+
+ chosen {
+ bootargs = "ip=on console=ttyMM0";
+ linux,stdout-path = "/mv64x60/mpsc at 8000";
+ };
+};
More information about the Linuxppc-dev
mailing list