[PATCH 08/13] pm: Handle HID0_SLEEP in the TLF_NAPPING hack.

Scott Wood scottwood at freescale.com
Tue May 8 04:29:52 EST 2007


The e300 core (and probably most other 6xx chips) can only come out of
sleep mode with an interrupt.  However, interrupts are logically disabled
by the power management layer.

This hack extends the existing doze/nap hack to also suppress the running
of the interrupt handler when in sleep mode.

Signed-off-by: Scott Wood <scottwood at freescale.com>
---
 arch/powerpc/kernel/idle_6xx.S |   34 +++++++++++++++++++++++++++++++++-
 1 files changed, 33 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index 01bcd52..f45d634 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -147,6 +147,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	isync
 	b	1b
 
+#ifdef CONFIG_PM
+ret_from_sleep:
+	.long	ret_from_except
+	.long	ret_from_except
+#endif
+
 /*
  * Return from NAP/DOZE mode, restore some CPU specific registers,
  * we are called with DR/IR still off and r2 containing physical
@@ -154,7 +160,33 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
  * address).  We have to preserve r10.
  */
 _GLOBAL(power_save_6xx_restore)
-	lwz	r9,_LINK(r11)		/* interrupted in ppc6xx_idle: */
+#ifdef CONFIG_PM
+	mfspr	r9, SPRN_HID0
+	andis.	r9, r9, HID0_SLEEP at h
+	beq+	1f
+
+	/*
+	 * SLEEP mode is invoked through the PM subsystem, which means
+	 * that interrupts should be disabled.  However, the hardware
+	 * requires them to be enabled to wake up.  To prevent the
+	 * interrupt from being visible to Linux, return immediately
+	 * rather than run the interrupt handler.
+	 */
+	lis	r9, ret_from_sleep at h
+	ori	r9, r9, ret_from_sleep at l
+	tophys(r9, r9)
+	mtlr	r9
+
+	/*
+	 * Disable interrupts, so that the interrupt doesn't happen
+	 * again until the PM code sets MSR[EE].
+	 */
+	lwz	r9, _MSR(r11)
+	rlwinm	r9, r9, 0, ~MSR_EE
+	stw	r9, _MSR(r11)
+#endif
+
+1:	lwz	r9,_LINK(r11)		/* interrupted in ppc6xx_idle: */
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
 #ifdef CONFIG_SMP
-- 
1.5.0.3




More information about the Linuxppc-dev mailing list