[PATCH 10/13] powerpc: Add Marvell mv64x60 PCI bridge support
Dale Farnsworth
dale at farnsworth.org
Sat May 5 07:10:14 EST 2007
This patch adds PCI bridge support for the Marvell mv64x60 chip.
Signed-off-by: Dale Farnsworth <dale at farnsworth.org>
---
I think I have addressed all of the issues raised by Arnd and Stephen.
arch/powerpc/platforms/embedded6xx/Kconfig | 1
arch/powerpc/sysdev/Makefile | 3
arch/powerpc/sysdev/mv64x60.h | 2
arch/powerpc/sysdev/mv64x60_pci.c | 172 +++++++++++++++++++
4 files changed, 177 insertions(+), 1 deletion(-)
Index: linux-2.6-powerpc-df/arch/powerpc/sysdev/Makefile
===================================================================
--- linux-2.6-powerpc-df.orig/arch/powerpc/sysdev/Makefile
+++ linux-2.6-powerpc-df/arch/powerpc/sysdev/Makefile
@@ -14,7 +14,8 @@ obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_FSL_PCIE) += fsl_pcie.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
-obj-$(CONFIG_MV64X60) += mv64x60_pic.o mv64x60_dev.o
+mv64x60-$(CONFIG_PCI) += mv64x60_pci.o
+obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o
# contains only the suspend handler for time
obj-$(CONFIG_PM) += timer.o
Index: linux-2.6-powerpc-df/arch/powerpc/sysdev/mv64x60.h
===================================================================
--- linux-2.6-powerpc-df.orig/arch/powerpc/sysdev/mv64x60.h
+++ linux-2.6-powerpc-df/arch/powerpc/sysdev/mv64x60.h
@@ -6,4 +6,6 @@
extern void __init mv64x60_init_irq(void);
extern unsigned int mv64x60_get_irq(void);
+extern void __init mv64x60_pci_init(void);
+
#endif /* __MV64X60_H__ */
Index: linux-2.6-powerpc-df/arch/powerpc/sysdev/mv64x60_pci.c
===================================================================
--- /dev/null
+++ linux-2.6-powerpc-df/arch/powerpc/sysdev/mv64x60_pci.c
@@ -0,0 +1,172 @@
+/*
+ * PCI bus setup for Marvell mv64360/mv64460 host bridges (Discovery)
+ *
+ * Author: Dale Farnsworth <dale at farnsworth.org>
+ *
+ * 2007 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+#define PCI_HEADER_TYPE_INVALID 0x7f /* Invalid PCI header type */
+
+#ifdef CONFIG_SYSFS
+/* 32-bit hex or dec stringified number + '\n' */
+#define MV64X60_VAL_LEN_MAX 11
+#define MV64X60_PCICFG_CPCI_HOTSWAP 0x68
+
+static ssize_t mv64x60_hs_reg_read(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct pci_dev *phb;
+ u32 v;
+
+ if (off > 0)
+ return 0;
+ if (count < MV64X60_VAL_LEN_MAX)
+ return -EINVAL;
+
+ phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+ if (!phb)
+ return -ENODEV;
+ pci_read_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, &v);
+ pci_dev_put(phb);
+
+ return sprintf(buf, "0x%08x\n", v);
+}
+
+static ssize_t mv64x60_hs_reg_write(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct pci_dev *phb;
+ u32 v;
+
+ if (off > 0)
+ return 0;
+ if (count <= 0)
+ return -EINVAL;
+
+ if (sscanf(buf, "%i", &v) != 1)
+ return -EINVAL;
+
+ phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+ if (!phb)
+ return -ENODEV;
+ pci_write_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, v);
+ pci_dev_put(phb);
+
+ return count;
+}
+
+static struct bin_attribute mv64x60_hs_reg_attr = { /* Hotswap register */
+ .attr = {
+ .name = "hs_reg",
+ .mode = S_IRUGO | S_IWUSR,
+ .owner = THIS_MODULE,
+ },
+ .size = MV64X60_VAL_LEN_MAX,
+ .read = mv64x60_hs_reg_read,
+ .write = mv64x60_hs_reg_write,
+};
+
+static int __init mv64x60_sysfs_init(void)
+{
+ struct device_node *np;
+ struct platform_device *pdev;
+ const unsigned int *prop;
+
+ np = of_find_compatible_node(NULL, NULL, "mv64x60");
+ if (!np)
+ return 0;
+
+ prop = of_get_property(np, "hs_reg_valid", NULL);
+ of_node_put(np);
+
+ pdev = platform_device_register_simple("mv64x60", 0, NULL, 0);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ return sysfs_create_bin_file(&pdev->dev.kobj, &mv64x60_hs_reg_attr);
+}
+
+subsys_initcall(mv64x60_sysfs_init);
+
+#endif /* CONFIG_SYSFS */
+
+static void __init mv64x60_pci_fixup_early(struct pci_dev *dev)
+{
+ /*
+ * Set the host bridge hdr_type to an invalid value so that
+ * pci_setup_device() will ignore the host bridge.
+ */
+ dev->hdr_type = PCI_HEADER_TYPE_INVALID;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360,
+ mv64x60_pci_fixup_early);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64460,
+ mv64x60_pci_fixup_early);
+
+static int __init mv64x60_add_bridge(struct device_node *dev)
+{
+ int len;
+ struct pci_controller *hose;
+ struct resource rsrc;
+ const int *bus_range;
+ int primary;
+
+ memset(&rsrc, 0, sizeof(rsrc));
+
+ /* Fetch host bridge registers address */
+ if (of_address_to_resource(dev, 0, &rsrc)) {
+ printk(KERN_ERR "No PCI reg property in device tree\n");
+ return -ENODEV;
+ }
+
+ /* Get bus range if any */
+ bus_range = of_get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int))
+ printk(KERN_WARNING "Can't get bus-range for %s, assume"
+ " bus 0\n", dev->full_name);
+
+ hose = pcibios_alloc_controller();
+ if (!hose)
+ return -ENOMEM;
+
+ hose->arch_data = dev;
+ hose->set_cfg_type = 1;
+
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ setup_indirect_pci(hose, rsrc.start, rsrc.start + 4);
+ hose->bus_offset = hose->first_busno;
+
+ printk(KERN_INFO "Found MV64x60 PCI host bridge at 0x%016llx. "
+ "Firmware bus number: %d->%d\n",
+ (unsigned long long)rsrc.start, hose->first_busno,
+ hose->last_busno);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ primary = (hose->first_busno == 0);
+ pci_process_bridge_OF_ranges(hose, dev, primary);
+
+ return 0;
+}
+
+void __init mv64x60_pci_init(void)
+{
+ struct device_node *np = NULL;
+
+ while ((np = of_find_compatible_node(np, "pci", "mv64x60-pci")))
+ mv64x60_add_bridge(np);
+}
Index: linux-2.6-powerpc-df/arch/powerpc/platforms/embedded6xx/Kconfig
===================================================================
--- linux-2.6-powerpc-df.orig/arch/powerpc/platforms/embedded6xx/Kconfig
+++ linux-2.6-powerpc-df/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -40,6 +40,7 @@ config MPC10X_BRIDGE
config MV64X60
bool
+ select PPC_INDIRECT_PCI
config MPC10X_OPENPIC
bool
More information about the Linuxppc-dev
mailing list