[PATCH] ucc_geth: eliminate max-speed, change interface-type to phy-connection-type
Kim Phillips
kim.phillips at freescale.com
Thu May 3 05:21:49 EST 2007
It was agreed that phy-connection-type was a better name for
the interface-type property, so this patch renames it.
Also, the max-speed property name was determined too generic,
and is therefore eliminated in favour of phy-connection-type
derivation logic.
includes corrections to copyright text.
Signed-off-by: Kim Phillips <kim.phillips at freescale.com>
---
Jeff, this patch depends on Stephen Rothwell's
"[PATCH 2/2] Rename get_property to of_get_property: drivers"
patch dated Tue, 1 May 2007 13:54:02 +1000
drivers/net/ucc_geth.c | 40 ++++++++++++++++------------------------
drivers/net/ucc_geth_mii.c | 9 +++++----
drivers/net/ucc_geth_mii.h | 10 +++++-----
3 files changed, 26 insertions(+), 33 deletions(-)
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index d7aff81..361eca0 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ * Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved.
*
* Author: Shlomi Gridish <gridish at freescale.com>
* Li Yang <leoli at freescale.com>
@@ -3737,21 +3737,21 @@ static int ucc_geth_close(struct net_device *dev)
const struct ethtool_ops ucc_geth_ethtool_ops = { };
-static phy_interface_t to_phy_interface(const char *interface_type)
+static phy_interface_t to_phy_interface(const char *phy_connection_type)
{
- if (strcasecmp(interface_type, "mii") == 0)
+ if (strcasecmp(phy_connection_type, "mii") == 0)
return PHY_INTERFACE_MODE_MII;
- if (strcasecmp(interface_type, "gmii") == 0)
+ if (strcasecmp(phy_connection_type, "gmii") == 0)
return PHY_INTERFACE_MODE_GMII;
- if (strcasecmp(interface_type, "tbi") == 0)
+ if (strcasecmp(phy_connection_type, "tbi") == 0)
return PHY_INTERFACE_MODE_TBI;
- if (strcasecmp(interface_type, "rmii") == 0)
+ if (strcasecmp(phy_connection_type, "rmii") == 0)
return PHY_INTERFACE_MODE_RMII;
- if (strcasecmp(interface_type, "rgmii") == 0)
+ if (strcasecmp(phy_connection_type, "rgmii") == 0)
return PHY_INTERFACE_MODE_RGMII;
- if (strcasecmp(interface_type, "rgmii-id") == 0)
+ if (strcasecmp(phy_connection_type, "rgmii-id") == 0)
return PHY_INTERFACE_MODE_RGMII_ID;
- if (strcasecmp(interface_type, "rtbi") == 0)
+ if (strcasecmp(phy_connection_type, "rtbi") == 0)
return PHY_INTERFACE_MODE_RTBI;
return PHY_INTERFACE_MODE_MII;
@@ -3819,29 +3819,21 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ug_info->phy_address = *prop;
/* get the phy interface type, or default to MII */
- prop = of_get_property(np, "interface-type", NULL);
+ prop = of_get_property(np, "phy-connection-type", NULL);
if (!prop) {
/* handle interface property present in old trees */
prop = of_get_property(phy, "interface", NULL);
- if (prop != NULL)
+ if (prop != NULL) {
phy_interface = enet_to_phy_interface[*prop];
- else
+ max_speed = enet_to_speed[*prop];
+ } else
phy_interface = PHY_INTERFACE_MODE_MII;
} else {
phy_interface = to_phy_interface((const char *)prop);
}
- /* get speed, or derive from interface */
- prop = of_get_property(np, "max-speed", NULL);
- if (!prop) {
- /* handle interface property present in old trees */
- prop = of_get_property(phy, "interface", NULL);
- if (prop != NULL)
- max_speed = enet_to_speed[*prop];
- } else {
- max_speed = *prop;
- }
- if (!max_speed) {
+ /* get speed, or derive from PHY interface */
+ if (max_speed == 0)
switch (phy_interface) {
case PHY_INTERFACE_MODE_GMII:
case PHY_INTERFACE_MODE_RGMII:
@@ -3854,9 +3846,9 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
max_speed = SPEED_100;
break;
}
- }
if (max_speed == SPEED_1000) {
+ /* configure muram FIFOs for gigabit operation */
ug_info->uf_info.urfs = UCC_GETH_URFS_GIGA_INIT;
ug_info->uf_info.urfet = UCC_GETH_URFET_GIGA_INIT;
ug_info->uf_info.urfset = UCC_GETH_URFSET_GIGA_INIT;
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index 27a1ef3..f96966d 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -1,12 +1,13 @@
/*
* drivers/net/ucc_geth_mii.c
*
- * Gianfar Ethernet Driver -- MIIM bus implementation
- * Provides Bus interface for MIIM regs
+ * QE UCC Gigabit Ethernet Driver -- MII Management Bus Implementation
+ * Provides Bus interface for MII Management regs in the UCC register space
*
- * Author: Li Yang
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
*
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ * Authors: Li Yang <leoli at freescale.com>
+ * Kim Phillips <kim.phillips at freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/drivers/net/ucc_geth_mii.h b/drivers/net/ucc_geth_mii.h
index 98430fe..d834370 100644
--- a/drivers/net/ucc_geth_mii.h
+++ b/drivers/net/ucc_geth_mii.h
@@ -1,13 +1,13 @@
/*
* drivers/net/ucc_geth_mii.h
*
- * Gianfar Ethernet Driver -- MII Management Bus Implementation
- * Driver for the MDIO bus controller in the Gianfar register space
+ * QE UCC Gigabit Ethernet Driver -- MII Management Bus Implementation
+ * Provides Bus interface for MII Management regs in the UCC register space
*
- * Author: Andy Fleming
- * Maintainer: Kumar Gala
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
*
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ * Authors: Li Yang <leoli at freescale.com>
+ * Kim Phillips <kim.phillips at freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
--
1.5.0.3
More information about the Linuxppc-dev
mailing list