[PATCH 2/8] bootwrapper: missing relocation in crt0.S

[Milton Miller]

crt0.S had provisions to provide run address relocaton to got2 and
cache flush, but not on the bss clear or stack pointer load.  Apply
the same fixup for them.

Signed-off-by: Milton Miller <miltonm at bga.com>
--- 
Compiles and links.  Stack is created within the image when linked at
4M and run at 0.  Did not verify bss relocation.

Index: kernel/arch/powerpc/boot/crt0.S
===================================================================
--- kernel.orig/arch/powerpc/boot/crt0.S	2007-03-16 23:22:00.000000000 -0500
+++ kernel/arch/powerpc/boot/crt0.S	2007-03-16 23:42:42.000000000 -0500
@@ -63,21 +63,30 @@ _zimage_start:
 	/* Clear the BSS */
 	lis	r9,__bss_start at ha
 	addi	r9,r9,__bss_start at l
+	add	r9,r0,r9
 	lis	r8,_end at ha
 	addi	r8,r8,_end at l
+	add	r8,r0,r8
 	li	r0,0
 5:	stw	r0,0(r9)
 	addi	r9,r9,4
 	cmplw	cr0,r9,r8
 	blt	5b
 
+	/* recreate relocation offset */
+	lis	r9,_end at ha
+	addi	r9,r9,_end at l
+	subf	r0,r9,r8
+
 	/* Possibly set up a custom stack */
 .weak	_platform_stack_top
 	lis	r8,_platform_stack_top at ha
 	addi	r8,r8,_platform_stack_top at l
 	cmpwi	r8,0
 	beq	6f
+	add	r8,r0,r8
 	lwz	r1,0(r8)
+	add	r1,r0,r1
 	li	r0,0
 	stwu	r0,-16(r1)	/* establish a stack frame */
 6: