[PATCH][POWERPC] [004/006] Removed config options that we don'tsupport in embedded6xx

[Stewart Katherine-ra4863]

Hmm, a little bit more homework is needed, I believe.

A couple of the boards listed in your delete are still
active & available systems.  The two that caught my eye are:
PQ2FADS_VR : MPC82xx Family Application Development System 
PQ2FADS ZU : MPC82xx Family Application Development System 

Have all the formal maintainers of the boards listed for 
removal from the config been consulted?

A reasonable list of the one's Freescale still has active can be found
at: 
http://www.freescale.com/webapp/sps/site/taxonomy.jsp?nodeId=0162468rH3b
TdGJk19Pcqx
but I need to double check a couple of other spots, too.

Couple of minor comments in text.

Kate

> -----Original Message-----
> From: linuxppc-dev-bounces+k.stewart=freescale.com at ozlabs.org
> [mailto:linuxppc-dev-bounces+k.stewart=freescale.com at ozlabs.org]On
> Behalf Of Kumar Gala
> Sent: Friday, March 16, 2007 10:24 AM
> To: linuxppc-dev at ozlabs.org
> Subject: [PATCH][POWERPC] [004/006] Removed config options that we
> don'tsupport in embedded6xx
> 
> 
> When we started arch/powerpc we duplicated a number of config 
> options from arch/ppc
> for various platforms that are supported.  Now that we 
> actually support a few
> platforms, remove all the ones that haven't been moved over.  
> Additionally, this
> cleanup moved the 82xx/PQ2 options over into 
> arch/powerpc/platforms/82xx/Kconfig
> where they belong.  It also killed GEN550 which doesn't exist 
> in arch/powerpc.
> 
> Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
> ---
>  arch/powerpc/Kconfig.debug                 |    3 +-
>  arch/powerpc/platforms/82xx/Kconfig        |   35 ++++
>  arch/powerpc/platforms/embedded6xx/Kconfig |  264 
> +---------------------------
>  3 files changed, 38 insertions(+), 264 deletions(-)
> 
<snip>

> +
> +config 8260
> +	bool "CPM2 Support" if WILLOW
> +	depends on 6xx
> +	default y if PQ2FADS
> +	help
> +	  The MPC8260 is a typical embedded CPU made by 
> Motorola.  Selecting

while you're updating this, it should be corrected. Motorola
doesn't make these parts, Freescale does.  

> +	  this option means that you wish to build a kernel for 
> a machine with
> +	  an 8260 class CPU.
> +
> +config 8272
> +	bool
> +	depends on 6xx
> +	default y if ADS8272
> +	select 8260
> +	help
> +	  The MPC8272 CPM has a different internal dpram setup 
> than other CPM2
> +	  devices
> +
> +config CPM2
> +	bool
> +	depends on 8260 || MPC8560 || MPC8555
> +	default y
> +	help
> +	  The CPM2 (Communications Processor Module) is a coprocessor on
> +	  embedded CPUs made by Motorola.  Selecting this

ditto change Motorola to Freescale
 
> option means that
> +	  you wish to build a kernel for a machine with a CPM2 
> coprocessor
> +	  on it (826x, 827x, 8560).
>  endmenu

<snip>