[PATCH] ucc_geth.c, make PHY device optional.
Joakim Tjernlund
joakim.tjernlund at transmode.se
Sat Jun 30 04:49:40 EST 2007
This patch makes the PHY optional for ucc_geth.c ethernet driver.
This is useful to support a direct mii to mii connection to, for example,
a onboard swicth.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund at transmode.se>
----
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 32bb748..8630294 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -2273,7 +2273,8 @@ static void ucc_geth_stop(struct ucc_geth_private *ugeth)
ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
/* Tell the kernel the link is down */
- phy_stop(phydev);
+ if (phydev)
+ phy_stop(phydev);
/* Mask all interrupts */
out_be32(ugeth->uccf->p_ucce, 0x00000000);
@@ -3687,14 +3688,16 @@ static int ucc_geth_open(struct net_device *dev)
dev->dev_addr[5],
&ugeth->ug_regs->macstnaddr1,
&ugeth->ug_regs->macstnaddr2);
-
- err = init_phy(dev);
+ err = 0;
+ if (ugeth->ug_info->mdio_bus != ~0)
+ err = init_phy(dev);
if (err) {
ugeth_err("%s: Cannot initialize PHY, aborting.", dev->name);
return err;
}
- phy_start(ugeth->phydev);
+ if (ugeth->phydev)
+ phy_start(ugeth->phydev);
err =
request_irq(ugeth->ug_info->uf_info.irq, ucc_geth_irq_handler, 0,
@@ -3726,8 +3729,9 @@ static int ucc_geth_close(struct net_device *dev)
ugeth_vdbg("%s: IN", __FUNCTION__);
ucc_geth_stop(ugeth);
-
- phy_disconnect(ugeth->phydev);
+
+ if (ugeth->phydev)
+ phy_disconnect(ugeth->phydev);
ugeth->phydev = NULL;
netif_stop_queue(dev);
@@ -3807,17 +3811,16 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
ph = of_get_property(np, "phy-handle", NULL);
- phy = of_find_node_by_phandle(*ph);
-
- if (phy == NULL)
- return -ENODEV;
-
- /* set the PHY address */
- prop = of_get_property(phy, "reg", NULL);
- if (prop == NULL)
- return -1;
- ug_info->phy_address = *prop;
-
+ if (ph != NULL) {
+ phy = of_find_node_by_phandle(*ph);
+ if (phy == NULL)
+ return -ENODEV;
+ /* set the PHY address */
+ prop = of_get_property(phy, "reg", NULL);
+ if (prop == NULL)
+ return -1;
+ ug_info->phy_address = *prop;
+ }
/* get the phy interface type, or default to MII */
prop = of_get_property(np, "phy-connection-type", NULL);
if (!prop) {
@@ -3857,19 +3860,22 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ug_info->uf_info.utftt = UCC_GETH_UTFTT_GIGA_INIT;
}
- /* Set the bus id */
- mdio = of_get_parent(phy);
+ ug_info->mdio_bus = ~0; /* Means no MDIO bus */
+ if (ph) {
+ /* Set the bus id */
+ mdio = of_get_parent(phy);
- if (mdio == NULL)
- return -1;
+ if (mdio == NULL)
+ return -1;
- err = of_address_to_resource(mdio, 0, &res);
- of_node_put(mdio);
+ err = of_address_to_resource(mdio, 0, &res);
+ of_node_put(mdio);
- if (err)
- return -1;
+ if (err)
+ return -1;
- ug_info->mdio_bus = res.start;
+ ug_info->mdio_bus = res.start;
+ }
printk(KERN_INFO "ucc_geth: UCC%1d at 0x%8x (irq = %d) \n",
ug_info->uf_info.ucc_num + 1, ug_info->uf_info.regs,
More information about the Linuxppc-dev
mailing list