[PATCH 5/5 v2] Add the memory management driver to RapidIO.

Zhang Wei wei.zhang at freescale.com
Wed Jun 27 18:35:48 EST 2007


This patch adds the memory management driver to RapidIO.
The RapidIO system size is changed to automatically detection.
Add the memory mapping driver to RapidIO basic driver.
Multi master ports are supported.
Add a simple Bitmap RapidIO space allocator driver.

Signed-off-by: Zhang Wei <wei.zhang at freescale.com>
---
 drivers/net/rionet.c                |   17 +-
 drivers/rapidio/Kconfig             |   18 +-
 drivers/rapidio/Makefile            |    1 +
 drivers/rapidio/rio-access.c        |   10 +-
 drivers/rapidio/rio-scan.c          |   53 +++--
 drivers/rapidio/rio-sysfs.c         |    3 +-
 drivers/rapidio/rio.c               |  479 ++++++++++++++++++++++++++++++++++-
 drivers/rapidio/rio.h               |    9 +-
 drivers/rapidio/sallocator/Kconfig  |    9 +
 drivers/rapidio/sallocator/Makefile |   12 +
 drivers/rapidio/sallocator/bitmap.c |  384 ++++++++++++++++++++++++++++
 include/linux/rio.h                 |   71 +++++-
 include/linux/rio_drv.h             |   41 +++-
 13 files changed, 1048 insertions(+), 59 deletions(-)
 create mode 100644 drivers/rapidio/sallocator/Kconfig
 create mode 100644 drivers/rapidio/sallocator/Makefile
 create mode 100644 drivers/rapidio/sallocator/bitmap.c

diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index df6b738..8dcda4d 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -78,7 +78,7 @@ static int rionet_capable = 1;
  * could be made into a hash table to save memory depending
  * on system trade-offs.
  */
-static struct rio_dev *rionet_active[RIO_MAX_ROUTE_ENTRIES];
+static struct rio_dev **rionet_active;
 
 #define is_rionet_capable(pef, src_ops, dst_ops)		\
 			((pef & RIO_PEF_INB_MBOX) &&		\
@@ -115,6 +115,7 @@ static int rionet_rx_clean(struct net_device *ndev)
 
 		rnet->rx_skb[i]->data = data;
 		skb_put(rnet->rx_skb[i], RIO_MAX_MSG_SIZE);
+		rnet->rx_skb[i]->dev = ndev;
 		rnet->rx_skb[i]->protocol =
 		    eth_type_trans(rnet->rx_skb[i], ndev);
 		error = netif_rx(rnet->rx_skb[i]);
@@ -202,7 +203,8 @@ static int rionet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	}
 
 	if (eth->h_dest[0] & 0x01) {
-		for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++)
+		for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rnet->mport->sys_size);
+				i++)
 			if (rionet_active[i])
 				rionet_queue_tx_msg(skb, ndev,
 						    rionet_active[i]);
@@ -392,6 +394,8 @@ static void rionet_remove(struct rio_dev *rdev)
 	struct net_device *ndev = NULL;
 	struct rionet_peer *peer, *tmp;
 
+	free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ?
+					__ilog2(sizeof(void *)) + 4 : 0);
 	unregister_netdev(ndev);
 	kfree(ndev);
 
@@ -449,6 +453,15 @@ static int rionet_setup_netdev(struct rio_mport *mport)
 		goto out;
 	}
 
+	if (!(rionet_active = (struct rio_dev **)__get_free_pages(GFP_KERNEL,
+				mport->sys_size ? __ilog2(sizeof(void *)) + 4
+				: 0))) {
+		rc = -ENOMEM;
+		goto out;
+	}
+	memset((void *)rionet_active, 0, sizeof(void *) *
+				RIO_MAX_ROUTE_ENTRIES(mport->sys_size));
+
 	/* Set up private area */
 	rnet = (struct rionet_private *)ndev->priv;
 	rnet->mport = mport;
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index 4142115..f669108 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -1,14 +1,6 @@
 #
 # RapidIO configuration
 #
-config RAPIDIO_8_BIT_TRANSPORT
-	bool "8-bit transport addressing"
-	depends on RAPIDIO
-	---help---
-	  By default, the kernel assumes a 16-bit addressed RapidIO
-	  network. By selecting this option, the kernel will support
-	  an 8-bit addressed network.
-
 config RAPIDIO_DISC_TIMEOUT
 	int "Discovery timeout duration (seconds)"
 	depends on RAPIDIO
@@ -16,3 +8,13 @@ config RAPIDIO_DISC_TIMEOUT
 	---help---
 	  Amount of time a discovery node waits for a host to complete
 	  enumeration before giving up.
+
+config RAPIDIO_PROC_FS
+	bool "I/O and Memory resource debug"
+	depends on RAPIDIO && PROC_FS
+	default y
+	---help---
+	  Enable this option, it will create a /proc/riores node for
+	  monitoring the RapidIO I/O and Memory resource.
+
+source "drivers/rapidio/sallocator/Kconfig"
diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile
index 7c0e181..e5b2f11 100644
--- a/drivers/rapidio/Makefile
+++ b/drivers/rapidio/Makefile
@@ -4,3 +4,4 @@
 obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o
 
 obj-$(CONFIG_RAPIDIO)		+= switches/
+obj-$(CONFIG_RAPIDIO)		+= sallocator/
diff --git a/drivers/rapidio/rio-access.c b/drivers/rapidio/rio-access.c
index 8b56bbd..a3824ba 100644
--- a/drivers/rapidio/rio-access.c
+++ b/drivers/rapidio/rio-access.c
@@ -48,7 +48,7 @@ int __rio_local_read_config_##size \
 	u32 data = 0;							\
 	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
 	spin_lock_irqsave(&rio_config_lock, flags);			\
-	res = mport->ops->lcread(mport->id, offset, len, &data);	\
+	res = mport->ops->lcread(mport, mport->id, offset, len, &data);	\
 	*value = (type)data;						\
 	spin_unlock_irqrestore(&rio_config_lock, flags);		\
 	return res;							\
@@ -71,7 +71,7 @@ int __rio_local_write_config_##size \
 	unsigned long flags;						\
 	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
 	spin_lock_irqsave(&rio_config_lock, flags);			\
-	res = mport->ops->lcwrite(mport->id, offset, len, value);	\
+	res = mport->ops->lcwrite(mport, mport->id, offset, len, value);\
 	spin_unlock_irqrestore(&rio_config_lock, flags);		\
 	return res;							\
 }
@@ -108,7 +108,7 @@ int rio_mport_read_config_##size \
 	u32 data = 0;							\
 	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
 	spin_lock_irqsave(&rio_config_lock, flags);			\
-	res = mport->ops->cread(mport->id, destid, hopcount, offset, len, &data); \
+	res = mport->ops->cread(mport, mport->id, destid, hopcount, offset, len, &data); \
 	*value = (type)data;						\
 	spin_unlock_irqrestore(&rio_config_lock, flags);		\
 	return res;							\
@@ -131,7 +131,7 @@ int rio_mport_write_config_##size \
 	unsigned long flags;						\
 	if (RIO_##size##_BAD) return RIO_BAD_SIZE;			\
 	spin_lock_irqsave(&rio_config_lock, flags);			\
-	res = mport->ops->cwrite(mport->id, destid, hopcount, offset, len, value); \
+	res = mport->ops->cwrite(mport, mport->id, destid, hopcount, offset, len, value); \
 	spin_unlock_irqrestore(&rio_config_lock, flags);		\
 	return res;							\
 }
@@ -166,7 +166,7 @@ int rio_mport_send_doorbell(struct rio_mport *mport, u16 destid, u16 data)
 	unsigned long flags;
 
 	spin_lock_irqsave(&rio_doorbell_lock, flags);
-	res = mport->ops->dsend(mport->id, destid, data);
+	res = mport->ops->dsend(mport, mport->id, destid, data);
 	spin_unlock_irqrestore(&rio_doorbell_lock, flags);
 
 	return res;
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index f935c1f..1484a38 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -73,7 +73,7 @@ static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
 
 	rio_mport_read_config_32(port, destid, hopcount, RIO_DID_CSR, &result);
 
-	return RIO_GET_DID(result);
+	return RIO_GET_DID(port->sys_size, result);
 }
 
 /**
@@ -88,7 +88,7 @@ static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
 static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did)
 {
 	rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR,
-				  RIO_SET_DID(did));
+				  RIO_SET_DID(port->sys_size, did));
 }
 
 /**
@@ -100,7 +100,8 @@ static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u
  */
 static void rio_local_set_device_id(struct rio_mport *port, u16 did)
 {
-	rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(did));
+	rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(port->sys_size,
+				did));
 }
 
 /**
@@ -351,8 +352,17 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
 		rswitch->switchid = next_switchid;
 		rswitch->hopcount = hopcount;
 		rswitch->destid = destid;
+		if (!(rswitch->route_table = kzalloc(sizeof(u16)*
+					RIO_MAX_ROUTE_ENTRIES(port->sys_size),
+					GFP_KERNEL))) {
+			kfree(rdev);
+			rdev = NULL;
+			kfree(rswitch);
+			goto out;
+		}
 		/* Initialize switch route table */
-		for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES; rdid++)
+		for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES(port->sys_size);
+				rdid++)
 			rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
 		rdev->rswitch = rswitch;
 		sprintf(rio_name(rdev), "%02x:s:%04x", rdev->net->id,
@@ -481,7 +491,7 @@ static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)
 {
 	u32 result;
 
-	rio_mport_read_config_32(port, RIO_ANY_DESTID, hopcount,
+	rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size), hopcount,
 				 RIO_HOST_DID_LOCK_CSR, &result);
 
 	return (u16) (result & 0xffff);
@@ -572,14 +582,16 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 	}
 
 	/* Attempt to acquire device lock */
-	rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount,
+	rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
+				  hopcount,
 				  RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
 	while ((tmp = rio_get_host_deviceid_lock(port, hopcount))
 	       < port->host_deviceid) {
 		/* Delay a bit */
 		mdelay(1);
 		/* Attempt to acquire device lock again */
-		rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount,
+		rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
+					  hopcount,
 					  RIO_HOST_DID_LOCK_CSR,
 					  port->host_deviceid);
 	}
@@ -591,7 +603,8 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 	}
 
 	/* Setup new RIO device */
-	if ((rdev = rio_setup_device(net, port, RIO_ANY_DESTID, hopcount, 1))) {
+	if ((rdev = rio_setup_device(net, port, RIO_ANY_DESTID(port->sys_size),
+					hopcount, 1))) {
 		/* Add device to the global and bus/net specific list. */
 		list_add_tail(&rdev->net_list, &net->devices);
 	} else
@@ -599,7 +612,8 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 
 	if (rio_is_switch(rdev)) {
 		next_switchid++;
-		sw_inport = rio_get_swpinfo_inport(port, RIO_ANY_DESTID, hopcount);
+		sw_inport = rio_get_swpinfo_inport(port,
+				RIO_ANY_DESTID(port->sys_size), hopcount);
 		rio_route_add_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE,
 				    port->host_deviceid, sw_inport);
 		rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
@@ -613,7 +627,8 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 		}
 
 		num_ports =
-		    rio_get_swpinfo_tports(port, RIO_ANY_DESTID, hopcount);
+		    rio_get_swpinfo_tports(port, RIO_ANY_DESTID(port->sys_size),
+						hopcount);
 		pr_debug(
 		    "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
 		    rio_name(rdev), rdev->vid, rdev->did, num_ports);
@@ -625,13 +640,15 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 			cur_destid = next_destid;
 
 			if (rio_sport_is_active
-			    (port, RIO_ANY_DESTID, hopcount, port_num)) {
+			    (port, RIO_ANY_DESTID(port->sys_size), hopcount,
+			     port_num)) {
 				pr_debug(
 				    "RIO: scanning device on port %d\n",
 				    port_num);
 				rio_route_add_entry(port, rdev->rswitch,
 						    RIO_GLOBAL_TABLE,
-						    RIO_ANY_DESTID, port_num);
+						    RIO_ANY_DESTID(port->sys_size),
+						    port_num);
 
 				if (rio_enum_peer(net, port, hopcount + 1) < 0)
 					return -1;
@@ -736,7 +753,8 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
 				pr_debug(
 				    "RIO: scanning device on port %d\n",
 				    port_num);
-				for (ndestid = 0; ndestid < RIO_ANY_DESTID;
+				for (ndestid = 0;
+				     ndestid < RIO_ANY_DESTID(port->sys_size);
 				     ndestid++) {
 					rio_route_get_entry(port, rdev->rswitch,
 							    RIO_GLOBAL_TABLE,
@@ -797,7 +815,7 @@ static int rio_mport_is_active(struct rio_mport *port)
  * network list of associated master ports. Returns a
  * RIO network pointer on success or %NULL on failure.
  */
-static struct rio_net __devinit *rio_alloc_net(struct rio_mport *port)
+static struct rio_net *rio_alloc_net(struct rio_mport *port)
 {
 	struct rio_net *net;
 
@@ -919,7 +937,9 @@ static void rio_build_route_tables(void)
 
 	list_for_each_entry(rdev, &rio_devices, global_list)
 	    if (rio_is_switch(rdev))
-		for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) {
+		for (i = 0;
+		     i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
+		     i++) {
 			if (rio_route_get_entry
 			    (rdev->net->hport, rdev->rswitch, RIO_GLOBAL_TABLE,
 			     i, &sport) < 0)
@@ -983,7 +1003,8 @@ int rio_disc_mport(struct rio_mport *mport)
 		del_timer_sync(&rio_enum_timer);
 
 		pr_debug("done\n");
-		if (rio_disc_peer(net, mport, RIO_ANY_DESTID, 0) < 0) {
+		if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size),
+					0) < 0) {
 			printk(KERN_INFO
 			       "RIO: master port %d device has failed discovery\n",
 			       mport->id);
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
index eed9143..691c1be 100644
--- a/drivers/rapidio/rio-sysfs.c
+++ b/drivers/rapidio/rio-sysfs.c
@@ -43,7 +43,8 @@ static ssize_t routes_show(struct device *dev, struct device_attribute *attr, ch
 	if (!rdev->rswitch)
 		goto out;
 
-	for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) {
+	for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
+			i++) {
 		if (rdev->rswitch->route_table[i] == RIO_INVALID_ROUTE)
 			continue;
 		str +=
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index f644807..5248774 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -23,10 +23,22 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
+#include <linux/seq_file.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/dma-mapping.h>
+#include <linux/hardirq.h>
 
 #include "rio.h"
 
+#define ERR(fmt, arg...) \
+	printk(KERN_ERR "%s:%s: " fmt,  __FILE__, __FUNCTION__, ## arg)
+
 static LIST_HEAD(rio_mports);
+static LIST_HEAD(rio_inb_mems);
+static LIST_HEAD(rio_outb_mems);
+
+static DEFINE_SPINLOCK(rio_config_lock);
 
 /**
  * rio_local_get_device_id - Get the base/extended device id for a port
@@ -42,7 +54,7 @@ u16 rio_local_get_device_id(struct rio_mport *port)
 
 	rio_local_read_config_32(port, RIO_DID_CSR, &result);
 
-	return (RIO_GET_DID(result));
+	return (RIO_GET_DID(port->sys_size, result));
 }
 
 /**
@@ -332,6 +344,350 @@ int rio_release_outb_dbell(struct rio_dev *rdev, struct resource *res)
 }
 
 /**
+ * rio_request_io_region -- request resource in RapidIO IO region
+ * @mport: Master port
+ * @devid: Device specific pointer to pass
+ * @start: IO resource start address
+ * @size: IO resource size
+ * @name: Resource name
+ * @flag: Flag for resource
+ * @res: Return resource which has been allocated. If res == NULL,
+ *       the function will alloc the memory for return resource.
+ *
+ * Return: The resource which has been allocated.
+ */
+struct resource *rio_request_io_region(struct rio_mport *mport, void *devid,
+		resource_size_t start, resource_size_t size,
+		const char *name, unsigned long flags,
+		struct resource *res)
+{
+	if (!res && !(res = kmalloc(sizeof(struct resource), GFP_KERNEL))) {
+		ERR("No free memory for res alloc!\n");
+		goto err;
+	}
+	memset(res, 0, sizeof(struct resource));
+	size = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+	/* if start == 0 then auto locate the start address */
+	if (!start) {
+		if (allocate_resource(&mport->iores, res, size,
+				mport->iores.start, mport->iores.end,
+				size, NULL, NULL) < 0) {
+			ERR("allocte resource error!\n");
+			goto err;
+		}
+		res->name = name;
+		res->flags = flags;
+	} else {
+		rio_init_io_res(res, start, start + size - 1, name, flags);
+		if (request_resource(&mport->iores, res) < 0) {
+			ERR("Can't get SRIO IO resource!\n");
+			goto err;
+		}
+	}
+	return res;
+
+err:
+	if (res)
+		kfree(res);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(rio_request_io_region);
+
+/**
+ * rio_map_inb_region -- Mapping inbound memory region.
+ * @mport: Master port.
+ * @mem: Memory struction for mapping.
+ * @rflags: Flags for mapping.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the mapping from the mem->riores to mem->iores.
+ */
+int rio_map_inb_region(struct rio_mport *mport, struct rio_mem *mem, u32 rflags)
+{
+	int rc = 0;
+	unsigned long flags;
+
+	if (!mport->mops)
+		return -1;
+	spin_lock_irqsave(&rio_config_lock, flags);
+	rc = mport->mops->map_inb(mport, mem->iores.start, mem->riores.start, mem->size, rflags);
+	spin_unlock_irqrestore(&rio_config_lock, flags);
+	return rc;
+}
+
+/**
+ * rio_map_outb_region -- Mapping outbound memory region.
+ * @mport: Master port.
+ * @tid: Target RapidIO device id.
+ * @mem: Memory struction for mapping.
+ * @rflags: Flags for mapping.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the mapping from the mem->iores to mem->riores.
+ */
+int rio_map_outb_region(struct rio_mport *mport, u16 tid,
+		struct rio_mem *mem, u32 rflags)
+{
+	int rc = 0;
+	unsigned long flags;
+
+	if (!mport->mops)
+		return -1;
+	spin_lock_irqsave(&rio_config_lock, flags);
+	rc = mport->mops->map_outb(mport, mem->iores.start, mem->riores.start, mem->size, tid, rflags);
+	spin_unlock_irqrestore(&rio_config_lock, flags);
+	return rc;
+}
+
+/**
+ * rio_unmap_inb_region -- Unmap the inbound memory region
+ * @mport: Master port
+ * @mem: Memory struction for unmapping.
+ */
+void rio_unmap_inb_region(struct rio_mport *mport, struct rio_mem *mem)
+{
+	unsigned long flags;
+	if (!mport->mops)
+		return;
+	spin_lock_irqsave(&rio_config_lock, flags);
+	mport->mops->unmap_inb(mport, mem->iores.start);
+	spin_unlock_irqrestore(&rio_config_lock, flags);
+}
+
+/**
+ * rio_unmap_outb_region -- Unmap the outbound memory region
+ * @mport: Master port
+ * @mem: Memory struction for unmapping.
+ */
+void rio_unmap_outb_region(struct rio_mport *mport, struct rio_mem *mem)
+{
+	unsigned long flags;
+	if (!mport->mops)
+		return;
+	spin_lock_irqsave(&rio_config_lock, flags);
+	mport->mops->unmap_outb(mport, mem->iores.start);
+	spin_unlock_irqrestore(&rio_config_lock, flags);
+}
+
+/**
+ * rio_release_inb_region -- Release the inbound region resource.
+ * @mport: Master port
+ * @mem: Inbound region descriptor
+ *
+ * Return 0 is successed.
+ */
+int rio_release_inb_region(struct rio_mport *mport, struct rio_mem *mem)
+{
+	int rc = 0;
+	if (!mem)
+		return rc;
+	rio_unmap_inb_region(mport, mem);
+	if (mem->virt)
+		dma_free_coherent(NULL, mem->size, mem->virt, mem->iores.start);
+
+	if (mem->iores.parent)
+		rc = release_resource(&mem->iores);
+	if (mem->riores.parent && !rc)
+		rc = release_resource(&mem->riores);
+
+	if (mem->node.prev)
+		list_del(&mem->node);
+
+	kfree(mem);
+
+	return rc;
+}
+
+/**
+ * rio_request_inb_region -- Request inbound memory region
+ * @mport: Master port
+ * @dev_id: Device specific pointer to pass
+ * @size: The request memory windows size
+ * @name: The region name
+ * @owner: The region owner driver id
+ *
+ * Retrun: The rio_mem struction for inbound memory descriptor.
+ *
+ * This function is used for request RapidIO space inbound region. If the size
+ * less than 4096 or not aligned to 2^N, it will be adjusted. The function will
+ * alloc a block of local DMA memory of the size for inbound region target and
+ * request a RapidIO region for inbound region source. Then the inbound region
+ * will be claimed in RapidIO space and the local DMA memory will be added to
+ * local inbound memory list. The rio_mem with the inbound relationship will
+ * be returned.
+ */
+struct rio_mem *rio_request_inb_region(struct rio_mport *mport, void *dev_id,
+		resource_size_t size, const char *name, u32 owner)
+{
+	struct rio_mem *rmem = NULL;
+	int ret;
+
+	rmem = kzalloc(sizeof(struct rio_mem), GFP_KERNEL);
+	if (!rmem)
+		goto err;
+
+	/* Align the size to 2^N */
+	size = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+	/* Alloc the RapidIO space */
+	ret = rio_space_request(mport, size, &rmem->riores);
+	if (ret) {
+		printk(KERN_ERR "RIO space request error! ret = %d\n", ret);
+		goto err;
+	}
+
+	rmem->riores.name = name;
+	rmem->size = rmem->riores.end - rmem->riores.start + 1;
+
+	/* Initialize inbound memory */
+	if (!(rmem->virt = dma_alloc_coherent(NULL, rmem->size,
+				&rmem->iores.start, GFP_KERNEL))) {
+		ERR("Inbound memory alloc error\n");
+		goto err;
+	}
+	rmem->iores.end = rmem->iores.start + rmem->size - 1;
+	rmem->owner = owner;
+
+	/* Map RIO space to local DMA memory */
+	if ((ret = rio_map_inb_region(mport, rmem, 0))) {
+		printk(KERN_ERR "RIO map inbound mem error, ret = %d\n", ret);
+		goto err;
+	}
+
+	/* Claim the region */
+	if ((ret = rio_space_claim(rmem))) {
+		printk(KERN_ERR "RIO inbound mem claim error, ret = %d\n", ret);
+		goto err;
+	}
+	list_add(&rmem->node, &rio_inb_mems);
+
+	return rmem;
+
+err:
+	rio_release_inb_region(mport, rmem);
+	return NULL;
+}
+
+/**
+ * rio_release_outb_region -- Release the outbound region resource.
+ * @mport: Master port
+ * @mem: Outbound region descriptor
+ *
+ * Return 0 is successed.
+ */
+int rio_release_outb_region(struct rio_mport *mport, struct rio_mem *mem)
+{
+	int rc = 0;
+	if (!mem)
+		return rc;
+	rio_unmap_outb_region(mport, mem);
+	rio_space_release(mem);
+	if (mem->virt)
+		iounmap(mem->virt);
+
+	if (mem->iores.parent)
+		rc = release_resource(&mem->iores);
+	if (mem->riores.parent && !rc)
+		rc = release_resource(&mem->riores);
+
+	if (mem->node.prev)
+		list_del(&mem->node);
+
+	kfree(mem);
+
+	return rc;
+}
+
+/** rio_prepare_io_mem -- Prepare IO region for RapidIO outbound mapping
+ * @mport: Master port
+ * @dev: RIO device specific pointer to pass
+ * @size: Request IO size
+ * @name: The request IO resource name
+ *
+ * Return: The rio_mem descriptor with IO region resource.
+ *
+ * This function request IO region firstly and ioremap it for preparing
+ * outbound window mapping. The function do not map the outbound region
+ * because ioremap can not located at the interrupt action function.
+ * The function can be called in the initialization for just prepared.
+ */
+struct rio_mem *rio_prepare_io_mem(struct rio_mport *mport,
+		struct rio_dev *dev, resource_size_t size, const char *name)
+{
+	struct rio_mem *rmem = NULL;
+
+	rmem = kzalloc(sizeof(struct rio_mem), GFP_KERNEL);
+	if (!rmem)
+		goto err;
+
+	/* Align the size to 2^N */
+	size = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+	/* Request RapidIO IO region */
+	if (!(rio_request_io_region(mport, dev, 0, size,
+				name, RIO_RESOURCE_MEM, &rmem->iores))) {
+		ERR("RIO io region request error!\n");
+		goto err;
+	}
+
+	rmem->virt = ioremap((phys_addr_t)(rmem->iores.start), size);
+	rmem->size = size;
+
+	list_add(&rmem->node, &rio_outb_mems);
+	return rmem;
+err:
+	rio_release_outb_region(mport, rmem);
+	return NULL;
+}
+
+/** rio_request_outb_region -- Request IO region and get outbound region
+ *                             for RapidIO outbound mapping
+ * @mport: Master port
+ * @dev_id: RIO device specific pointer to pass
+ * @size: Request IO size
+ * @name: The request IO resource name
+ * @owner: The outbound region owned driver
+ *
+ * Return: The rio_mem descriptor with IO region resource.
+ *
+ * This function request IO region firstly and ioremap it for preparing
+ * outbound window mapping. And it will find the RapidIO region owned by
+ * the driver id. Then map it. Be careful about that the ioremap can not
+ * be called in the interrupt event action function.
+ */
+struct rio_mem *rio_request_outb_region(struct rio_mport *mport, void *dev_id,
+			resource_size_t size, const char *name, u32 owner)
+{
+	struct rio_mem *rmem = NULL;
+	struct rio_dev *dev = dev_id;
+
+	if (!dev)
+		goto err;
+
+	rmem = rio_prepare_io_mem(mport, dev, size, name);
+	if (!rmem)
+		goto err;
+
+	if (rio_space_find_mem(mport, dev->destid, owner, &rmem->riores)) {
+		ERR("Can not find RIO region meet the ownerid %x\n", owner);
+		goto err;
+	}
+
+	/* Map the rio space to local */
+	if (rio_map_outb_region(mport, dev->destid, rmem, 0)) {
+		ERR("RIO map outb error!\n");
+		goto err;
+	}
+	return rmem;
+err:
+	rio_release_outb_region(mport, rmem);
+	return NULL;
+}
+
+/**
  * rio_mport_get_feature - query for devices' extended features
  * @port: Master port to issue transaction
  * @local: Indicate a local master port or remote device access
@@ -476,8 +832,8 @@ int rio_init_mports(void)
 					port->iores.end - port->iores.start,
 					port->name)) {
 			printk(KERN_ERR
-			       "RIO: Error requesting master port region %8.8lx-%8.8lx\n",
-			       port->iores.start, port->iores.end - 1);
+			       "RIO: Error requesting master port region %016llx-%016llx\n",
+			       (u64)port->iores.start, (u64)port->iores.end - 1);
 			rc = -ENOMEM;
 			goto out;
 		}
@@ -486,6 +842,7 @@ int rio_init_mports(void)
 			rio_enum_mport(port);
 		else
 			rio_disc_mport(port);
+		rio_space_init(port);
 	}
 
       out:
@@ -508,3 +865,119 @@ EXPORT_SYMBOL_GPL(rio_request_inb_mbox);
 EXPORT_SYMBOL_GPL(rio_release_inb_mbox);
 EXPORT_SYMBOL_GPL(rio_request_outb_mbox);
 EXPORT_SYMBOL_GPL(rio_release_outb_mbox);
+
+#ifdef CONFIG_RAPIDIO_PROC_FS
+enum { MAX_IORES_LEVEL = 5 };
+
+struct riors {
+	struct rio_mport *mp;
+	int res;
+	struct resource *p;
+} riomres;
+
+static void *r_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	struct resource *p = v;
+	struct riors *rs = m->private;
+
+	(*pos)++;
+	if (p->child)
+		return p->child;
+	while (!p->sibling && p->parent)
+		p = p->parent;
+	if (p->sibling)
+		return p->sibling;
+	else {
+		rs->res++;
+		if(rs->res >= RIO_MAX_MPORT_RESOURCES) {
+			rs->mp = list_entry(rs->mp->node.next, struct rio_mport, node);
+			rs->res = 0;
+			if (&rs->mp->node == &rio_mports)
+				return NULL;
+		}
+		seq_printf(m, "%2d: ", rs->res);
+		rs->p = &rs->mp->riores[rs->res];
+		p = rs->p;
+
+		return p;
+	}
+}
+
+static void *r_start(struct seq_file *m, loff_t *pos)
+{
+	struct riors *rs = m->private;
+	struct resource *p;
+
+	if (*pos) {
+		*pos = 0;
+		return NULL;
+	}
+
+	rs->mp = list_entry(rio_mports.next, struct rio_mport, node);
+	rs->res = -1;
+	rs->p = &rs->mp->iores;
+	p = rs->p;
+
+	seq_printf(m, "IO: ");
+
+	return p;
+}
+
+static void r_stop(struct seq_file *m, void *v)
+{
+}
+
+static int r_show(struct seq_file *m, void *v)
+{
+	struct riors *rs = m->private;
+	struct resource *root = rs->p;
+	struct resource *r = v, *p;
+	int width = root->end < 0x10000 ? 4 : 8;
+	int depth;
+
+	for (depth = 0, p = r; p->parent && depth < MAX_IORES_LEVEL; depth++, p = p->parent)
+		if (p == root)
+			break;
+	seq_printf(m, "%*s%0*llx-%0*llx : %s\n",
+			depth * 2, "",
+			width, (unsigned long long) r->start,
+			width, (unsigned long long) r->end,
+			r->name ? r->name : "<BAD>");
+	return 0;
+}
+
+static const struct seq_operations resource_op = {
+	.start	= r_start,
+	.next	= r_next,
+	.stop	= r_stop,
+	.show	= r_show,
+};
+
+static int riores_open(struct inode *inode, struct file *file)
+{
+	int res = seq_open(file, &resource_op);
+	if (!res) {
+		struct seq_file *m = file->private_data;
+		m->private = &riomres;
+	}
+	return res;
+}
+
+static const struct file_operations proc_riores_operations = {
+	.open		= riores_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int __init rioresources_init(void)
+{
+	struct proc_dir_entry *entry;
+
+	entry = create_proc_entry("riores", 0, NULL);
+	if (entry)
+		entry->proc_fops = &proc_riores_operations;
+	return 0;
+}
+__initcall(rioresources_init);
+#endif
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index b242cee..7a3b62e 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -51,10 +51,5 @@ extern struct rio_route_ops __end_rio_route_ops[];
 	DECLARE_RIO_ROUTE_SECTION(.rio_route_ops,			\
 			vid, did, add_hook, get_hook)
 
-#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT
-#define RIO_GET_DID(x)	((x & 0x00ff0000) >> 16)
-#define RIO_SET_DID(x)	((x & 0x000000ff) << 16)
-#else
-#define RIO_GET_DID(x)	(x & 0xffff)
-#define RIO_SET_DID(x)	(x & 0xffff)
-#endif
+#define RIO_GET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
+#define RIO_SET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x000000ff) << 16))
diff --git a/drivers/rapidio/sallocator/Kconfig b/drivers/rapidio/sallocator/Kconfig
new file mode 100644
index 0000000..a33a1b8
--- /dev/null
+++ b/drivers/rapidio/sallocator/Kconfig
@@ -0,0 +1,9 @@
+choice
+	prompt "Default RapidIO Space Allocator"
+	depends on RAPIDIO
+	default RIO_SA_DEFAULT_BITMAP
+
+	config RIO_SA_DEFAULT_BITMAP
+		bool "Bitmap"
+
+endchoice
diff --git a/drivers/rapidio/sallocator/Makefile b/drivers/rapidio/sallocator/Makefile
new file mode 100644
index 0000000..437201c
--- /dev/null
+++ b/drivers/rapidio/sallocator/Makefile
@@ -0,0 +1,12 @@
+#
+# Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+#
+# Author: Zhang Wei, wei.zhang at freescale.com, Jun 2007
+#
+# This is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+
+obj-$(CONFIG_RIO_SA_DEFAULT_BITMAP) += bitmap.o
diff --git a/drivers/rapidio/sallocator/bitmap.c b/drivers/rapidio/sallocator/bitmap.c
new file mode 100644
index 0000000..fab8734
--- /dev/null
+++ b/drivers/rapidio/sallocator/bitmap.c
@@ -0,0 +1,384 @@
+/*
+ * RapidIO space allocator bitmap arithmetic.
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Zhang Wei <wei.zhang at freescale.com>, Jun 2007
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * The Bitmap allocator make the whole RapidIO device have the same fixed
+ * inbound memory window. And on the top of each device inbound window,
+ * there is a sect0 area, which will use for recording the individual
+ * driver owned memory space in device.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/rio_regs.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/seq_file.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/dma-mapping.h>
+
+#include "../rio.h"
+
+#undef DEBUG
+
+#define RIO_SBLOCK_SIZE	4096
+
+#define ERR(fmt, arg...) \
+	printk(KERN_ERR "ERROR %s - %s: " fmt,  __FILE__, __FUNCTION__, ## arg)
+#ifdef DEBUG
+#define DBG(fmt...) printk(fmt)
+#else
+#define DBG(fmt...) do {} while (0)
+#endif
+
+#define IS_64BIT_RES ((sizeof(resource_size_t) == 8) ? 1 : 0)
+#define SA_BITMAP_DRV_ID	0x4249544d
+#define SA_RIO_RESERVE_SPACE	0x4000000
+
+/* Definition for struct rio_res:ctrl */
+#define SA_RIO_RES_CTRL_EN	0x80000000
+struct rio_res {
+	u32 ctrl;	/* Control words
+			 * Bit 31: Enable bit.
+			 */
+	u32 addr;	/* The start addr bits [0-31] of RapidIO window */
+	u32 extaddr;	/* The start addr bits [32-63] of RapidIO window */
+	u32 size;	/* The size bits [0-31] of RapidIO window */
+	u32 extsize;	/* The size bits [32-63] of RapidIO window */
+	u32 owner;	/* The owner driver id */
+	u32 rev[2];	/* For align 32 bytes */
+};
+
+#define SA_BITMAP_MAX_INB_RES	32
+struct rio_sect0 {
+	u32	id;		/* ID for Bitmap space allocater driver */
+	u32	rioid;		/* RapidIO device id */
+	u32	width;		/* The resource width for RIO space, 32 or 64 */
+	u8	rev1[56];	/* Align to 64 bytes */
+	struct rio_res inb_res[SA_BITMAP_MAX_INB_RES];
+	u8	rev2[4096 - 64 - SA_BITMAP_MAX_INB_RES * 32];
+				/* Fill for 4096 bytes */
+};
+
+/* if select 64bit resource, we can use 34-bit rio address, otherwise 32-bit */
+static int rio_addr_size;
+static struct resource *root;
+static struct rio_mem sect0mem;		/* Sect 0 memory data */
+static struct rio_sect0	*sect0 = NULL;
+static struct rio_mem *sblock_buf = NULL;
+
+/**
+ * get_rio_addr_size -- get the RapidIO space address size.
+ *
+ * If it's a 64-bit system, the RapidIO space address size could be 34bit,
+ * otherwise, it should be 32 bit.
+ */
+static inline int get_rio_addr_size(void)
+{
+	return (sizeof(resource_size_t) == 8) ? 34 : 32;
+}
+
+/**
+ * rio_space_request -- request RapidIO space.
+ * @mport: RIO master port.
+ * @size: The request space size, must >= 4096.
+ * @new: The resource which required.
+ *
+ * Return:
+ *	0 -- Success
+ *	-EINVAL -- size is wrong (<4096)
+ *	-EFAULT -- new is NULL
+ *	others -- return from allocate_resource()
+ *
+ * This function request a memory from RapidIO space.
+ */
+int rio_space_request(struct rio_mport *mport, resource_size_t size,
+			struct resource *new)
+{
+	int ret = 0;
+
+	/* Align the size to 2^N */
+	size = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+	if (!new) {
+		ERR("The res is NULL!\n");
+		ret = -EFAULT;
+		goto out;
+	}
+	memset(new, 0, sizeof(struct resource));
+
+	ret = allocate_resource(root, new, size, root->start, root->end,
+			size, NULL, 0);
+	if (ret) {
+		ERR("No more resource for size 0x%08x!\n", size);
+		goto out;
+	}
+
+out:
+	return ret;
+}
+
+#ifdef DEBUG
+/**
+ * rio_sa_dump_sect0 -- Dump the sect0 content.
+ * @psect0: The point of sect0
+ */
+static void rio_sa_dump_sect0(struct rio_sect0 *psect0)
+{
+	int i;
+
+	if (!psect0)
+		return;
+
+	printk("Rio Sect0 %p dump:\n", psect0);
+	printk("...id = 0x%08x, width = %d, rioid = %d \n",
+			psect0->id, psect0->width, psect0->rioid);
+	for (i = 0; i < SA_BITMAP_MAX_INB_RES; i++)
+		if (psect0->inb_res[i].ctrl & SA_RIO_RES_CTRL_EN)
+			printk("...inb_res[%d]: ctrl 0x%08x, owner 0x%08x\n"
+				"\t\textaddr 0x%08x, addr 0x%08x\n"
+				"\t\textsize 0x%08x, size 0x%08x\n", i,
+			       psect0->inb_res[i].ctrl,
+			       psect0->inb_res[i].owner,
+			       psect0->inb_res[i].extaddr,
+			       psect0->inb_res[i].addr,
+			       psect0->inb_res[i].extsize,
+			       psect0->inb_res[i].size);
+}
+#endif
+
+/**
+ * rio_space_claim -- Claim the memory in RapidIO space
+ * @mem: The memory should be claimed.
+ *
+ * When you get a memory space and get ready of it, you should claim it in
+ * RapidIO space. Then, the other device could get the memory by calling
+ * rio_space_find_mem().
+ */
+int rio_space_claim(struct rio_mem *mem)
+{
+	int i;
+
+	if (!sect0) {
+		ERR("Sect0 is NULL!\n");
+		return -EINVAL;
+	}
+#ifdef DEBUG
+	rio_sa_dump_sect0(sect0);
+#endif
+
+	for (i = 0; i < SA_BITMAP_MAX_INB_RES; i++)
+		if (!(sect0->inb_res[i].ctrl & SA_RIO_RES_CTRL_EN)) {
+			sect0->inb_res[i].ctrl |= SA_RIO_RES_CTRL_EN;
+			sect0->inb_res[i].addr = (u32)(mem->riores.start);
+			sect0->inb_res[i].size = (u32)(mem->riores.end
+					- mem->riores.start + 1);
+			if (IS_64BIT_RES) {
+				sect0->inb_res[i].extaddr =
+					(u64)mem->riores.start >> 32;
+				sect0->inb_res[i].extsize =
+					(u64)(mem->riores.end
+						- mem->riores.start + 1) >> 32;
+			}
+			sect0->inb_res[i].owner = mem->owner;
+			DBG("The new inbound rio mem added:\n");
+			DBG("...inb_res[%d]: ctrl 0x%08x, owner 0x%08x\n"
+				"\t\textaddr 0x%08x, addr 0x%08x\n"
+				"\t\textsize 0x%08x, size 0x%08x\n", i,
+			       sect0->inb_res[i].ctrl,
+			       sect0->inb_res[i].owner,
+			       sect0->inb_res[i].extaddr,
+			       sect0->inb_res[i].addr,
+			       sect0->inb_res[i].extsize,
+			       sect0->inb_res[i].size);
+			return 0;
+		}
+
+	ERR("No free inbound window!\n");
+	return -EBUSY;
+}
+
+/**
+ * rio_space_release -- remove the memory record from RapidIO space.
+ *		        It's the pair function of rio_space_claim().
+ *
+ * @inbmem: The memory should be release.
+ */
+void rio_space_release(struct rio_mem *inbmem)
+{
+	int i;
+
+	/* Remove it from sect0 inb_res array */
+	for (i = 0; i < SA_BITMAP_MAX_INB_RES; i++)
+		if ((sect0->inb_res[i].ctrl & SA_RIO_RES_CTRL_EN) &&
+				(((u64)sect0->inb_res[i].extaddr << 32 |
+				  sect0->inb_res[i].addr)
+				== (u64)inbmem->riores.start)) {
+			sect0->inb_res[i].ctrl = 0;
+			sect0->inb_res[i].addr = 0;
+			sect0->inb_res[i].extaddr = 0;
+			sect0->inb_res[i].size = 0;
+			sect0->inb_res[i].extsize = 0;
+		}
+}
+
+/**
+ * rio_space_get_dev_mem -- get the whole owned inbound space of
+ *			    RapidIO device with did.
+ */
+static struct resource *rio_space_get_dev_mem(struct rio_mport *mport,
+		u16 did, struct resource *res)
+{
+	if(!res && !(res = kmalloc(sizeof(struct resource), GFP_KERNEL))) {
+		ERR("resource alloc error!\n");
+		return NULL;
+	}
+	memset(res, 0, sizeof(struct resource));
+
+	res->start = SA_RIO_RESERVE_SPACE + (did
+		<< (rio_addr_size - __ilog2(RIO_ANY_DESTID(mport->sys_size)
+						+ 1)));
+	res->end = res->start +
+		(1 << (rio_addr_size - __ilog2(RIO_ANY_DESTID(mport->sys_size)
+						+ 1))) - 1;
+	res->flags = RIO_RESOURCE_MEM;
+
+	return res;
+}
+
+/**
+ * rio_space_find_mem -- Find the memory space (RIO) of the rio driver owned.
+ * @mport: RIO master port.
+ * @tid: The target RapidIO device id which will be searched.
+ * @owner: The driver id as the search keyword.
+ * @res: The result of finding.
+ *
+ * return:
+ *	0 -- Success
+ *	-EFAULT -- Remote sect0 is a bad address
+ *	-EPROTONOSUPPORT -- The remote space allocator protocol is not support
+ *
+ * This function will find the memory located in RapidIO space, which is owned
+ * by the driver. If the remote RapidIO device use the diffrent space allocator,
+ * it will return -EPROTONOSUPPORT.
+ */
+int rio_space_find_mem(struct rio_mport *mport, u16 tid,
+			u32 owner, struct resource *res)
+{
+	volatile struct rio_sect0 __iomem *rsect0;
+	int i;
+	int ret = 0;
+	u32 width;
+
+	rio_space_get_dev_mem(mport, tid, &sblock_buf->riores);
+	sblock_buf->size = RIO_SBLOCK_SIZE;
+	rio_map_outb_region(mport, tid, sblock_buf, 0);
+
+	if (!sblock_buf->virt) {
+		ERR("Sect0 block buffer is NULL!\n");
+		ret = -EFAULT;
+		goto out;
+	}
+	rsect0 = sblock_buf->virt;
+
+	if (in_be32(&rsect0->id) != SA_BITMAP_DRV_ID) {
+		DBG("The target RapidIO space allocator is not rio_sa_bitmap! "
+				"id = 0x%x\n", rsect0->id);
+		ret = -EPROTONOSUPPORT;
+		goto out;
+	}
+
+#ifdef DEBUG
+	/* Dump remote sect0 for debug */
+	DBG("Dump the remote RIO dev %d sect0\n", tid);
+	rio_sa_dump_sect0(rsect0);
+#endif
+
+	width = in_be32(&rsect0->width);
+	if (sizeof(resource_size_t) * 8 < width)
+		printk(KERN_WARNING "WARNING: The system width %d is smaller "
+			"than the remote RapidIO space address width %d!",
+			sizeof(resource_size_t) * 8, width);
+
+	/* Find the rio space block */
+	for (i = 0; i < SA_BITMAP_MAX_INB_RES; i++)
+		if ((in_be32(&rsect0->inb_res[i].ctrl) & SA_RIO_RES_CTRL_EN)
+			  && (in_be32(&rsect0->inb_res[i].owner) == owner )) {
+			if (!res) {
+				ERR("Resource NULL error!\n");
+				ret = -EFAULT;
+				goto out;
+			}
+			memset(res, 0, sizeof(struct resource));
+			res->start = (IS_64BIT_RES && (width > 32)) ?
+				in_be32(&rsect0->inb_res[i].extaddr) << 32 : 0
+				| rsect0->inb_res[i].addr;
+			res->end = res->start - 1 +
+				  ((in_be32(&rsect0->inb_res[i].size)) |
+				  ((IS_64BIT_RES && (width > 32)) ?
+				  ((u64)(in_be32(&rsect0->inb_res[i].extsize))
+				   << 32) : 0));
+			goto out;
+		}
+
+out:
+	rio_unmap_outb_region(mport, sblock_buf);
+	return ret;
+}
+
+/**
+ * rio_space_init -- RapidIO space allocator initialization function.
+ * @mport: The master port.
+ */
+int rio_space_init(struct rio_mport *mport)
+{
+	root = &mport->riores[RIO_INB_MEM_RESOURCE];
+	memset(root, 0, sizeof(struct resource));
+
+	rio_addr_size = get_rio_addr_size();
+
+	rio_space_get_dev_mem(mport, rio_get_mport_id(mport), root);
+	root->name = "rio_space_inb";
+
+	/* Alloc the sect 0 for space managerment */
+	memset(&sect0mem, 0, sizeof(struct rio_mem));
+	if(!(sect0mem.virt = dma_alloc_coherent(NULL, RIO_SBLOCK_SIZE,
+					&sect0mem.iores.start, GFP_KERNEL))) {
+		ERR("sect0 memory alloc error!\n");
+		return -ENOMEM;
+	}
+	sect0mem.iores.end = sect0mem.iores.start + RIO_SBLOCK_SIZE - 1;
+	sect0mem.size = RIO_SBLOCK_SIZE;
+
+	if(rio_space_request(mport, RIO_SBLOCK_SIZE, &sect0mem.riores))
+		return -ENOMEM;
+
+	sect0mem.riores.name = "sect 0";
+	sect0 = sect0mem.virt;
+	sect0->id = SA_BITMAP_DRV_ID;
+	sect0->rioid = rio_get_mport_id(mport);
+	sect0->width = rio_addr_size;
+
+	/* map outbond window to access rio inb */
+	rio_map_inb_region(mport, &sect0mem, 0);
+
+	/* Init sblock buffer for block seeking */
+	sblock_buf = rio_prepare_io_mem(mport, NULL, RIO_SBLOCK_SIZE,
+			"sblock_buf");
+	return 0;
+}
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 68e3f68..d39d381 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -23,7 +23,6 @@
 #include <linux/device.h>
 #include <linux/rio_regs.h>
 
-#define RIO_ANY_DESTID		0xff
 #define RIO_NO_HOPCOUNT		-1
 #define RIO_INVALID_DESTID	0xffff
 
@@ -39,11 +38,8 @@
 					   entry is invalid (no route
 					   exists for the device ID) */
 
-#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT
-#define RIO_MAX_ROUTE_ENTRIES	(1 << 8)
-#else
-#define RIO_MAX_ROUTE_ENTRIES	(1 << 16)
-#endif
+#define RIO_MAX_ROUTE_ENTRIES(size)	(size ? (1 << 16) : (1 << 8))
+#define RIO_ANY_DESTID(size)		(size ? 0xffff : 0xff)
 
 #define RIO_MAX_MBOX		4
 #define RIO_MAX_MSG_SIZE	0x1000
@@ -69,6 +65,8 @@
 #define RIO_DOORBELL_RESOURCE	0
 #define RIO_INB_MBOX_RESOURCE	1
 #define RIO_OUTB_MBOX_RESOURCE	2
+#define RIO_INB_MEM_RESOURCE	3
+#define RIO_OUTB_MEM_RESOURCE	4
 
 extern struct bus_type rio_bus_type;
 extern struct list_head rio_devices;	/* list of all devices */
@@ -149,6 +147,11 @@ struct rio_dbell {
 	void *dev_id;
 };
 
+enum rio_phy_type {
+	RIO_PHY_PARALLEL,
+	RIO_PHY_SERIAL,
+};
+
 /**
  * struct rio_mport - RIO master port info
  * @dbells: List of doorbell events
@@ -174,9 +177,16 @@ struct rio_mport {
 	struct rio_msg outb_msg[RIO_MAX_MBOX];
 	int host_deviceid;	/* Host device ID */
 	struct rio_ops *ops;	/* maintenance transaction functions */
+	struct rio_mem_ops *mops; /* Memory functions */
 	unsigned char id;	/* port ID, unique among all ports */
 	unsigned char index;	/* port index, unique among all port
 				   interfaces of the same type */
+	unsigned int sys_size;	/* RapidIO common transport system size.
+				 * 0 - Small size. 256 devices.
+				 * 1 - Large size, 65536 devices.
+				 */
+	enum rio_phy_type phy_type; /* RapidIO phy type */
+	void *priv;		/* Master port private data */
 	unsigned char name[40];
 };
 
@@ -211,7 +221,7 @@ struct rio_switch {
 	u16 switchid;
 	u16 hopcount;
 	u16 destid;
-	u8 route_table[RIO_MAX_ROUTE_ENTRIES];
+	u16 *route_table;
 	int (*add_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
 			  u16 table, u16 route_destid, u8 route_port);
 	int (*get_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
@@ -229,18 +239,19 @@ struct rio_switch {
  * @dsend: Callback to send a doorbell message.
  */
 struct rio_ops {
-	int (*lcread) (int index, u32 offset, int len, u32 * data);
-	int (*lcwrite) (int index, u32 offset, int len, u32 data);
-	int (*cread) (int index, u16 destid, u8 hopcount, u32 offset, int len,
+	int (*lcread) (struct rio_mport *, int index, u32 offset, int len, u32 * data);
+	int (*lcwrite) (struct rio_mport *, int index, u32 offset, int len, u32 data);
+	int (*cread) (struct rio_mport *, int index, u16 destid, u8 hopcount, u32 offset, int len,
 		      u32 * data);
-	int (*cwrite) (int index, u16 destid, u8 hopcount, u32 offset, int len,
+	int (*cwrite) (struct rio_mport *, int index, u16 destid, u8 hopcount, u32 offset, int len,
 		       u32 data);
-	int (*dsend) (int index, u16 destid, u16 data);
+	int (*dsend) (struct rio_mport *, int index, u16 destid, u16 data);
 };
 
 #define RIO_RESOURCE_MEM	0x00000100
 #define RIO_RESOURCE_DOORBELL	0x00000200
 #define RIO_RESOURCE_MAILBOX	0x00000400
+#define RIO_RESOURCE_MAINT	0x00000800
 
 #define RIO_RESOURCE_CACHEABLE	0x00010000
 #define RIO_RESOURCE_PCI	0x00020000
@@ -309,6 +320,42 @@ struct rio_route_ops {
 			 u16 table, u16 route_destid, u8 * route_port);
 };
 
+/**
+ * Struct for RIO memory definition.
+ * @node: Node in list of memories
+ * @virt: The virtual address for mapped memory accessing.
+ * @owner: The owner id of this memory.
+ * @size: The size of memory space, it should same to iores and riores.
+ * @iores: The resource of local IO region for mapping.
+ * @riores: The resource of mapped RapidIO space region.
+ */
+struct rio_mem {
+	struct list_head node;
+	void *virt;
+	u32 owner;
+	resource_size_t size;
+	struct resource iores;
+	struct resource riores;
+};
+
+/**
+ * Struct for RIO memory definition.
+ * @map_inb: The function for mapping inbound memory window.
+ * @map_outb: The function for mapping outbound memory window.
+ * @unmap_inb: The function for unmapping inbound memory window.
+ * @unmap_outb: The function for unmapping outbound memory window.
+ */
+struct rio_mem_ops {
+	int (*map_inb) (struct rio_mport *, resource_size_t lstart,
+			resource_size_t rstart,
+			resource_size_t size, u32 flags);
+	int (*map_outb) (struct rio_mport *, resource_size_t lstart,
+			resource_size_t rstart,
+			resource_size_t size, u16 tid, u32 flags);
+	void (*unmap_inb) (struct rio_mport *, resource_size_t lstart);
+	void (*unmap_outb) (struct rio_mport *, resource_size_t lstart);
+};
+
 /* Architecture and hardware-specific functions */
 extern int rio_init_mports(void);
 extern void rio_register_mport(struct rio_mport *);
diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h
index 7adb2a1..70f778b 100644
--- a/include/linux/rio_drv.h
+++ b/include/linux/rio_drv.h
@@ -334,6 +334,16 @@ static inline void rio_init_dbell_res(struct resource *res, u16 start, u16 end)
 	res->flags = RIO_RESOURCE_DOORBELL;
 }
 
+static inline void rio_init_io_res(struct resource *res, resource_size_t start,
+		resource_size_t end, const char *name, unsigned long flag)
+{
+	memset(res, 0, sizeof(struct resource));
+	res->start = start;
+	res->end = end;
+	res->name = name;
+	res->flags = flag;
+}
+
 /**
  * RIO_DEVICE - macro used to describe a specific RIO device
  * @dev: the 16 bit RIO device ID
@@ -408,13 +418,33 @@ extern int rio_request_inb_dbell(struct rio_mport *, void *, u16, u16,
 extern int rio_release_inb_dbell(struct rio_mport *, u16, u16);
 extern struct resource *rio_request_outb_dbell(struct rio_dev *, u16, u16);
 extern int rio_release_outb_dbell(struct rio_dev *, struct resource *);
+extern struct resource *rio_request_io_region(struct rio_mport *, void *,
+				u32, u32, const char *, unsigned long,
+				struct resource *);
+extern struct rio_mem *rio_prepare_io_mem(struct rio_mport *, struct rio_dev *,
+				resource_size_t, const char *);
 
 /* Memory region management */
-int rio_claim_resource(struct rio_dev *, int);
-int rio_request_regions(struct rio_dev *, char *);
-void rio_release_regions(struct rio_dev *);
-int rio_request_region(struct rio_dev *, int, char *);
-void rio_release_region(struct rio_dev *, int);
+extern struct rio_mem *rio_request_inb_region(struct rio_mport *, void *,
+				resource_size_t, const char *, u32);
+extern struct rio_mem *rio_request_outb_region(struct rio_mport *,
+		void *, resource_size_t, const char *, u32);
+extern int rio_release_inb_region(struct rio_mport *, struct rio_mem *);
+extern int rio_release_outb_region(struct rio_mport *, struct rio_mem *);
+
+/* Memory low-level mapping functions */
+extern int rio_map_inb_region(struct rio_mport *, struct rio_mem *, u32);
+extern int rio_map_outb_region(struct rio_mport *, u16, struct rio_mem *, u32);
+extern void rio_unmap_inb_region(struct rio_mport *, struct rio_mem *);
+extern void rio_unmap_outb_region(struct rio_mport *, struct rio_mem *);
+
+/* Memory Allocator */
+extern int rio_space_request(struct rio_mport *, resource_size_t,
+						struct resource *);
+extern int rio_space_find_mem(struct rio_mport *, u16, u32, struct resource *);
+extern int rio_space_init(struct rio_mport *);
+extern int rio_space_claim(struct rio_mem *);
+extern void rio_space_release(struct rio_mem *);
 
 /* LDM support */
 int rio_register_driver(struct rio_driver *);
@@ -464,6 +494,7 @@ extern u16 rio_local_get_device_id(struct rio_mport *port);
 extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from);
 extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did,
 				   struct rio_dev *from);
+extern u32 rio_get_mport_id(struct rio_mport *);
 
 #endif				/* __KERNEL__ */
 #endif				/* LINUX_RIO_DRV_H */
-- 
1.5.1




More information about the Linuxppc-dev mailing list