dtc: Improve and better integrate dtc and libfdt Makefiles

David Gibson david at gibson.dropbear.id.au
Tue Jun 26 12:45:51 EST 2007 

This patch substantially revamps the dtc Makefiles, in particular
better integrating the Makefile for dtc proper with the Makefiles
imported from libfdt for libfdt and the shared testsuite.  Notable
changes:
	- No recursive make calls.  Instead subsidiary Makefiles are
included into the top-level Makefile so we get a complete dependency
information.
	- Common pattern rules, CFLAGS etc. shared between dtc, libfdt
and testsuite, rather than separate copies.
	- Vaguely Kbuild-like non-verbose mode used by default, which
makes warnings more prominent.
	- libfdt Makefile consists only of variable definitions and
helper rules, to make it more easily embeddable into other Makefile
systems.

Signed-off-by: David Gibson <david at gibson.dropbear.id.au>

Index: dtc/libfdt/Makefile
===================================================================
--- dtc.orig/libfdt/Makefile	2007-06-26 11:55:00.000000000 +1000
+++ /dev/null	1970-01-01 00:00:00.000000000 +0000
@@ -1,64 +0,0 @@
-PREFIX = /usr/local
-TARGETLIBS = libfdt.a
-LIBOBJS = fdt.o fdt_ro.o fdt_wip.o fdt_sw.o fdt_rw.o fdt_strerror.o
-
-SOURCE = $(shell find . -maxdepth 1 ! -name version.h -a -name '*.[h]')
-SOURCE += *.c Makefile
-NODEPTARGETS=<clean>
-
-CPPFLAGS = -I.
-CFLAGS = -Wall -g
-
-LIBDIR = $(PREFIX)/$(LIB32)
-
-EXTRA_DIST = \
-	README \
-	HOWTO \
-	LGPL-2.1
-
-ifdef V
-VECHO = :
-else
-VECHO = echo "	"
-ARFLAGS = rc
-.SILENT:
-endif
-
-DEPFILES = $(LIBOBJS:%.o=%.d)
-
-all:	libs
-
-.PHONY:	libs
-
-libs:	$(TARGETLIBS)
-
-%.o: %.c
-	@$(VECHO) CC $@
-	$(CC) $(CPPFLAGS) $(CFLAGS) -o $@ -c $<
-
-libfdt.a: $(LIBOBJS)
-	@$(VECHO) AR $@
-	$(AR) $(ARFLAGS) $@ $^
-
-%.i:	%.c
-	@$(VECHO) CPP $@
-	$(CC) $(CPPFLAGS) -E $< > $@
-
-%.s:	%.c
-	@$(VECHO) CC -S $@
-	$(CC) $(CPPFLAGS) $(CFLAGS) -o $@ -S $<
-
-clean:
-	@$(VECHO) CLEAN
-	rm -f *~ *.o *.so *.a *.d *.i *.s core a.out $(VERSION)
-
-%.d: %.c
-	@$(CC) $(CPPFLAGS) -MM -MT "$*.o $@" $< > $@
-
-# Workaround: Don't build dependencies for certain targets
-#    When the include below is executed, make will use the %.d target above to
-# generate missing files.  For certain targets (clean, version.h, etc) we don't
-# need or want these dependency files, so don't include them in this case.
-ifeq (,$(findstring <$(MAKECMDGOALS)>,$(NODEPTARGETS)))
--include $(DEPFILES)
-endif
Index: dtc/Makefile
===================================================================
--- dtc.orig/Makefile	2007-06-26 11:55:00.000000000 +1000
+++ dtc/Makefile	2007-06-26 11:56:18.000000000 +1000
@@ -1,67 +1,115 @@
-TARGETS = dtc ftdump
+CPPFLAGS = -I libfdt
 CFLAGS = -Wall -g
+LDFLAGS = -Llibfdt
 
 BISON = bison
 
-DTC_OBJS = dtc.o flattree.o fstree.o data.o livetree.o \
-		srcpos.o treesource.o \
-		dtc-parser.tab.o lex.yy.o
+#
+# Overall rules
+#
+ifdef V
+VECHO = :
+else
+VECHO = echo "	"
+ARFLAGS = rc
+.SILENT:
+endif
+
+NODEPTARGETS = clean
+ifeq ($(MAKECMDGOALS),)
+DEPTARGETS = all
+else
+DEPTARGETS = $(filter-out $(NODEPTARGETS),$(MAKECMDGOALS))
+endif
+
+all: dtc ftdump libfdt tests
+
+STD_CLEANFILES = *~ *.o *.d *.a *.i *.s core a.out
+
+clean: libfdt_clean tests_clean
+	@$(VECHO) CLEAN
+	rm -f $(STD_CLEANFILES)
+	rm -f *.tab.[ch] lex.yy.c *.output vgcore.*
+	rm -f $(BIN)
+
+#
+# General rules
+#
+
+%.o: %.c
+	@$(VECHO) CC $@
+	$(CC) $(CPPFLAGS) $(CFLAGS) -o $@ -c $<
+
+%.o: %.S
+	@$(VECHO) AS $@
+	$(CC) $(CPPFLAGS) $(AFLAGS) -D__ASSEMBLY__ -o $@ -c $<
 
-DEPFILES = $(DTC_OBJS:.o=.d)
-
-.PHONY: libfdt tests
+%.d: %.c
+	$(CC) $(CPPFLAGS) -MM -MG -MT "$*.o $@" $< > $@
 
-all: $(TARGETS) tests libfdt
+%.i:	%.c
+	@$(VECHO) CPP $@
+	$(CC) $(CPPFLAGS) -E $< > $@
+
+%.s:	%.c
+	@$(VECHO) CC -S $@
+	$(CC) $(CPPFLAGS) $(CFLAGS) -o $@ -S $<
+
+%.a:
+	@$(VECHO) AR $@
+	$(AR) $(ARFLAGS) $@ $^
 
-dtc: $(DTC_OBJS)
+$(BIN): %:
+	@$(VECHO) LD $@
 	$(LINK.c) -o $@ $^
 
-ftdump:	ftdump.o
-	$(LINK.c) -o $@ $^
 
-libfdt:
-	cd libfdt && $(MAKE) all
+#
+# Rules for dtc proper
+#
+DTC_PROGS = dtc ftdump
+DTC_OBJS = dtc.o flattree.o fstree.o data.o livetree.o \
+		srcpos.o treesource.o \
+		dtc-parser.tab.o lex.yy.o
+DTC_DEPFILES = $(DTC_OBJS:%.o=%.d)
 
 dtc-parser.tab.c dtc-parser.tab.h dtc-parser.output: dtc-parser.y
+	@$(VECHO) BISON $@
 	$(BISON) -d $<
 
 lex.yy.c: dtc-lexer.l
+	@$(VECHO) LEX $@
 	$(LEX) $<
 
-lex.yy.o: lex.yy.c dtc-parser.tab.h
+BIN += dtc ftdump
 
-tests:	tests/all
-
-tests/%: libfdt
-	$(MAKE) -C tests $*
-
-check:	all
-	cd tests; ./run_tests.sh
-
-checkv:	all
-	cd tests; ./run_tests.sh -v
-
-func:	all
-	cd tests; ./run_tests.sh -t func
-
-funcv:	all
-	cd tests; ./run_tests.sh -t func -v
-
-stress:	all
-	cd tests; ./run_tests.sh -t stress
-
-stressv: all
-	cd tests; ./run_tests.sh -t stress -v
-
-clean:
-	rm -f *~ *.o a.out core $(TARGETS)
-	rm -f *.tab.[ch] lex.yy.c
-	rm -f *.i *.output vgcore.*
-	rm -f *.d
-	$(MAKE) -C libfdt clean
-	$(MAKE) -C tests clean
+dtc: $(DTC_OBJS)
 
-%.d: %.c
-	$(CC) $(CPPFLAGS) -MM -MG -MT "$*.o $@" $< > $@
+ftdump:	ftdump.o
 
--include $(DEPFILES)
+ifneq ($(DEPTARGETS),)
+-include $(DTC_DEPFILES)
+endif
+
+#
+# Rules for libfdt
+#
+LIBFDT_PREFIX = libfdt/
+include libfdt/Makefile.libfdt
+
+.PHONY: libfdt
+libfdt: $(LIBFDT_LIB)
+
+libfdt_clean:
+	@$(VECHO) CLEAN "(libfdt)"
+	rm -f $(LIBFDT_CLEANFILES)
+
+ifneq ($(DEPTARGETS),)
+-include $(LIBFDT_DEPFILES)
+endif
+
+#
+# Testsuite rules
+#
+TESTS_PREFIX=tests/
+include tests/Makefile.tests
Index: dtc/tests/Makefile
===================================================================
--- dtc.orig/tests/Makefile	2007-06-26 11:55:00.000000000 +1000
+++ /dev/null	1970-01-01 00:00:00.000000000 +0000
@@ -1,67 +0,0 @@
-DTC = ../dtc
-VG_DTC = valgrind --tool=memcheck ../dtc
-
-LIB_TESTS = root_node find_property subnode_offset path_offset getprop \
-	notfound \
-	setprop_inplace nop_property nop_node \
-	sw_tree1 \
-	move_and_save \
-	open_pack rw_tree1 setprop del_property del_node
-LIBTREE_TESTS = truncated_property
-TESTS = $(LIB_TESTS) $(LIBTREE_TESTS)
-UTILS = dumptrees
-
-TREES = test_tree1.dtb
-
-CFLAGS = -Wall -g
-CPPFLAGS = -I../libfdt
-LDFLAGS = -L../libfdt
-
-LIBFDT = ../libfdt/libfdt.a
-
-ifdef V
-VECHO = :
-else
-VECHO = echo "	"
-.SILENT:
-endif
-
-DEPFILES = $(TESTS:%=%.d) testutils.d
-
-check: all
-	./run_tests.sh
-
-all:	$(TESTS) $(TREES)
-
-%.o: %.c
-	@$(VECHO) CC $@
-	$(CC) $(CPPFLAGS) $(CFLAGS) -o $@ -c $<
-
-%.o: %.S
-	@$(VECHO) AS $@
-	$(CC) -D__ASSEMBLY__ $(CPPFLAGS) -o $@ -c $<
-
-%: %.o
-	@$(VECHO) LD $@
-	$(CC) $(LDFLAGS) -o $@ $^ $(LDLIBS)
-
-$(LIB_TESTS): %: testutils.o $(LIBFDT)
-
-$(LIBTREE_TESTS): %: testutils.o trees.o $(LIBFDT)
-
-dumptrees: %: trees.o
-
-$(TREES): dumptrees
-	@$(VECHO) DUMPTREES
-	./dumptrees >/dev/null
-
-clean:
-	rm -f $(TESTS)
-	rm -f *.dtb dumptrees
-	rm -f *~ *.d *.o a.out core
-	rm -f *.i *.output vgcore.*
-
-%.d: %.c
-	@$(CC) $(CPPFLAGS) -MM -MT "$*.o $@" $< > $@
-
--include $(DEPFILES)
Index: dtc/libfdt/Makefile.libfdt
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ dtc/libfdt/Makefile.libfdt	2007-06-26 11:55:00.000000000 +1000
@@ -0,0 +1,19 @@
+# Makefile.libfdt
+#
+# This is not a complete Makefile of itself.  Instead, it is designed to
+# be easily embeddable into other systems of Makefiles.
+#
+
+LIBFDT_OBJS_L = fdt.o fdt_ro.o fdt_wip.o fdt_sw.o fdt_rw.o fdt_strerror.o
+LIBFDT_OBJS = $(LIBFDT_OBJS_L:%=$(LIBFDT_PREFIX)%)
+
+LIBFDT_LIB_L = libfdt.a
+LIBFDT_LIB = $(LIBFDT_LIB_L:%=$(LIBFDT_PREFIX)%)
+
+LIBFDT_CLEANFILES_L = *~ *.o *.d *.a $(LIBFDT_LIB) \
+	*.i *.s a.out core
+LIBFDT_CLEANFILES = $(LIBFDT_CLEANFILES_L:%=$(LIBFDT_PREFIX)%)
+
+$(LIBFDT_LIB): $(LIBFDT_OBJS)
+
+LIBFDT_DEPFILES = $(LIBFDT_OBJS:%.o=%.d)
Index: dtc/tests/Makefile.tests
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ dtc/tests/Makefile.tests	2007-06-26 11:55:00.000000000 +1000
@@ -0,0 +1,65 @@
+LIB_TESTS_L = root_node find_property subnode_offset path_offset getprop \
+	notfound \
+	setprop_inplace nop_property nop_node \
+	sw_tree1 \
+	move_and_save \
+	open_pack rw_tree1 setprop del_property del_node
+LIB_TESTS = $(LIB_TESTS_L:%=$(TESTS_PREFIX)%)
+
+LIBTREE_TESTS_L = truncated_property
+LIBTREE_TESTS = $(LIBTREE_TESTS_L:%=$(TESTS_PREFIX)%)
+
+TESTS = $(LIB_TESTS) $(LIBTREE_TESTS)
+
+TESTS_TREES_L = test_tree1.dtb
+TESTS_TREES = $(TESTS_TREES_L:%=$(TESTS_PREFIX)%)
+
+TESTS_TARGETS = $(TESTS) $(TESTS_TREES)
+
+TESTS_DEPFILES = $(TESTS:%=%.d) $(TESTS_PREFIX)testutils.d
+
+TESTS_CLEANFILES_L =  *.output vgcore.* *.dtb
+TESTS_CLEANFILES = $(TESTS_CLEANFILES_L:%=$(TESTS_PREFIX)%)
+
+BIN += $(TESTS) $(TESTS_PREFIX)dumptrees
+
+.PHONY: tests
+tests:	$(TESTS) $(TESTS_TREES)
+
+$(LIB_TESTS): %: $(TESTS_PREFIX)testutils.o $(LIBFDT_LIB)
+
+$(LIBTREE_TESTS): %: $(TESTS_PREFIX)testutils.o $(TESTS_PREFIX)trees.o $(LIBFDT_LIB)
+
+$(TESTS_PREFIX)dumptrees: $(TESTS_PREFIX)trees.o
+
+$(TESTS_TREES): $(TESTS_PREFIX)dumptrees
+	@$(VECHO) DUMPTREES
+	cd $(TESTS_PREFIX); ./dumptrees >/dev/null
+
+tests_clean:
+	@$(VECHO) CLEAN "(tests)"
+	rm -f $(STD_CLEANFILES:%=$(TESTS_PREFIX)%)
+	rm -f $(TESTS_CLEANFILES)
+
+check:	tests
+	cd $(TESTS_PREFIX); ./run_tests.sh
+
+checkv:	tests
+	cd $(TESTS_PREFIX); ./run_tests.sh -v
+
+func:	tests
+	cd $(TESTS_PREFIX); ./run_tests.sh -t func
+
+funcv:	tests
+	cd $(TESTS_PREFIX); ./run_tests.sh -t func -v
+
+stress:	tests
+	cd $(TESTS_PREFIX); ./run_tests.sh -t stress
+
+stressv: tests
+	cd $(TESTS_PREFIX); ./run_tests.sh -t stress -v
+
+ifneq ($(DEPTARGETS),)
+-include $(TESTS_DEPFILES)
+endif
+

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

More information about the Linuxppc-dev mailing list