ucc_geth DPRAM alloc error, 2.6.22-rc3

[Joakim Tjernlund]

> 
> Joakim Tjernlund wrote:
> > Trying to bring up a third ethernet i/f(ifconfig eth2 up) on
> > a Freescale 832x CPU gives me this:
> >  ifconfig eth2 up
> >  ucc_geth_startup: Can not allocate DPRAM memory for 
> p_thread_data_tx.
> >  eth2: Cannot configure net device, aborting.
> >  SIOCSIFFLAGS: Cannot allocate memory
> 
> It's possible that there isn't enough MURAM for three QE 
> ethernet interfaces.

Well, it was in 2.6.20 and now it isn't so something is wasting MURAM.

 Jocke