2.6.22-rc3-mm1

Michael Ellerman michael at ellerman.id.au
Mon Jun 4 12:29:46 EST 2007


On Fri, 2007-06-01 at 23:21 +0200, Mariusz Kozlowski wrote:
> BTW. This is 'make allnoconfig && make' result:
> 
>   MODPOST vmlinux
> ln: accessing `arch/powerpc/boot/zImage': No such file or directory
> make[1]: *** [arch/powerpc/boot/zImage] Error 1
> make: *** [zImage] Error 2

If you check your .config I think you'll find you have none of the
powerpc platforms selected, which means you don't get a zImage. And your
kernel won't boot on any actual hardware either :)

Perhaps one of the platforms should be the default if nothing else is
selected, just so allnoconfig works.

cheers

-- 
Michael Ellerman
OzLabs, IBM Australia Development Lab

wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)

We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20070604/b0498e55/attachment.pgp>


More information about the Linuxppc-dev mailing list