[PATCH 4/6] PowerPC 440EPx: Sequoia bootwrapper
Valentine Barshak
vbarshak at ru.mvista.com
Tue Jul 31 22:42:50 EST 2007
Stefan Roese wrote:
> On Tuesday 31 July 2007, Valentine Barshak wrote:
>>> Is treeboot-* really needed on Sequoia? From my understanding this is
>>> only needed for platforms using OpenBIOS as bootloader.
>> Right, it's not used for u-boot. I've included it just in case.
>
> I think we should drop it, when it's not used at all.
>
> You didn't comment on my review down below in the code. Perhaps you didn't see
> it. Here again the original review with 2 small comments.
>
Oops, sorry, I've missed it :) Thanks for review. I'll modify the code
according to your comments.
Thanks,
Valentine.
> Thanks for the good work.
>
>> +++ linux/arch/powerpc/boot/sequoia.c 2007-07-27 20:59:09.000000000 +0400
>> @@ -0,0 +1,234 @@
>> +/*
>> + * Based on Bamboo code by Josh Boyer <jwboyer at linux.vnet.ibm.com>
>> + * Copyright IBM Corporation, 2007
>> + *
>> + * Based on ebony wrapper:
>> + * Copyright 2007 David Gibson, IBM Corporation.
>> + *
>> + * Clocking code based on code by:
>> + * Stefan Roese <sr at denx.de>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * as published by the Free Software Foundation; version 2 of the License
>> + */
>> +#include <stdarg.h>
>> +#include <stddef.h>
>> +#include "types.h"
>> +#include "elf.h"
>> +#include "string.h"
>> +#include "stdio.h"
>> +#include "page.h"
>> +#include "ops.h"
>> +#include "dcr.h"
>> +#include "44x.h"
>> +
>> +extern char _dtb_start[];
>> +extern char _dtb_end[];
>> +
>> +static u8 *sequoia_mac0, *sequoia_mac1;
>> +
>> +#define SPRN_CCR1 0x378
>> +void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
>> +{
>> + u32 cpu, plb, opb, ebc, tb, uart0, m, vco;
>> + u32 reg;
>> + u32 fwdva, fwdvb, fbdv, lfbdv, opbdv0, perdv0, spcid0, prbdv0, tmp;
>> +
>> + mtdcr(DCRN_CPR0_ADDR, CPR0_PLLD0);
>> + reg = mfdcr(DCRN_CPR0_DATA);
>
> How about adding mfcpr functions to access the CPR regs. Makes the source
> better readable:
>
> static inline u32 mfcpr(u32 reg)
> {
> mtdcr(DCRN_CPR0_ADDR, reg);
> return mfdcr(DCRN_CPR0_DATA);
> }
>
>> + tmp = (reg & 0x000F0000) >> 16;
>> + fwdva = tmp ? tmp : 16;
>> + tmp = (reg & 0x00000700) >> 8;
>> + fwdvb = tmp ? tmp : 8;
>> + tmp = (reg & 0x1F000000) >> 24;
>> + fbdv = tmp ? tmp : 32;
>> + lfbdv = (reg & 0x0000007F);
>> +
>> + mtdcr(DCRN_CPR0_ADDR, CPR0_OPBD0);
>> + reg = mfdcr(DCRN_CPR0_DATA);
>> + tmp = (reg & 0x03000000) >> 24;
>> + opbdv0 = tmp ? tmp : 4;
>> +
>> + mtdcr(DCRN_CPR0_ADDR, CPR0_PERD0);
>> + reg = mfdcr(DCRN_CPR0_DATA);
>> + tmp = (reg & 0x07000000) >> 24;
>> + perdv0 = tmp ? tmp : 8;
>> +
>> + mtdcr(DCRN_CPR0_ADDR, CPR0_PRIMBD0);
>> + reg = mfdcr(DCRN_CPR0_DATA);
>> + tmp = (reg & 0x07000000) >> 24;
>> + prbdv0 = tmp ? tmp : 8;
>> +
>> + mtdcr(DCRN_CPR0_ADDR, CPR0_SCPID);
>> + reg = mfdcr(DCRN_CPR0_DATA);
>> + tmp = (reg & 0x03000000) >> 24;
>> + spcid0 = tmp ? tmp : 4;
>> +
>> + /* Calculate M */
>> + mtdcr(DCRN_CPR0_ADDR, CPR0_PLLC0);
>> + reg = mfdcr(DCRN_CPR0_DATA);
>> + tmp = (reg & 0x03000000) >> 24;
>> + if (tmp == 0) { /* PLL output */
>> + tmp = (reg & 0x20000000) >> 29;
>> + if (!tmp) /* PLLOUTA */
>> + m = fbdv * lfbdv * fwdva;
>> + else
>> + m = fbdv * lfbdv * fwdvb;
>> + }
>> + else if (tmp == 1) /* CPU output */
>> + m = fbdv * fwdva;
>> + else
>> + m = perdv0 * opbdv0 * fwdvb;
>> +
>> + vco = (m * sysclk) + (m >> 1);
>> + cpu = vco / fwdva;
>> + plb = vco / fwdvb / prbdv0;
>> + opb = plb / opbdv0;
>> + ebc = plb / perdv0;
>> +
>> + /* FIXME */
>> + uart0 = ser_clk;
>> +
>> + /* Figure out timebase. Either CPU or default TmrClk */
>> + asm volatile (
>> + "mfspr %0,%1\n"
>> + :
>> + "=&r"(reg) : "i"(SPRN_CCR1));
>> + if (reg & 0x0080)
>> + tb = 25000000; /* TmrClk is 25MHz */
>> + else
>> + tb = cpu;
>> +
>> + dt_fixup_cpu_clocks(cpu, tb, 0);
>> + dt_fixup_clock("/plb", plb);
>> + dt_fixup_clock("/plb/opb", opb);
>> + dt_fixup_clock("/plb/opb/ebc", ebc);
>> + dt_fixup_clock("/plb/opb/serial at ef600300", uart0);
>> + dt_fixup_clock("/plb/opb/serial at ef600400", uart0);
>> + dt_fixup_clock("/plb/opb/serial at ef600500", uart0);
>> + dt_fixup_clock("/plb/opb/serial at ef600600", uart0);
>> +}
>> +
>> +
>> +/*
>> + * 440EPx DDR1/2 memory controller code
>> + * TODO: move to generic 44x code
>> + */
>> +
>> +/* DDR0_02 */
>> +#define DDR_START 0x1
>> +#define DDR_START_SHIFT 0
>> +#define DDR_MAX_CS_REG 0x3
>> +#define DDR_MAX_CS_REG_SHIFT 24
>> +#define DDR_MAX_COL_REG 0xf
>> +#define DDR_MAX_COL_REG_SHIFT 16
>> +#define DDR_MAX_ROW_REG 0xf
>> +#define DDR_MAX_ROW_REG_SHIFT 8
>> +/* DDR0_08 */
>> +#define DDR_DDR2_MODE 0x1
>> +#define DDR_DDR2_MODE_SHIFT 0
>> +/* DDR0_10 */
>> +#define DDR_CS_MAP 0x3
>> +#define DDR_CS_MAP_SHIFT 8
>> +/* DDR0_14 */
>> +#define DDR_REDUC 0x1
>> +#define DDR_REDUC_SHIFT 16
>> +/* DDR0_42 */
>> +#define DDR_APIN 0x7
>> +#define DDR_APIN_SHIFT 24
>> +/* DDR0_43 */
>> +#define DDR_COL_SZ 0x7
>> +#define DDR_COL_SZ_SHIFT 8
>> +#define DDR_BANK8 0x1
>> +#define DDR_BANK8_SHIFT 0
>> +
>> +#define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask))
>> +
>> +static void ibm440epx_fixup_memsize(void)
>> +{
>> + unsigned long val, max_cs, max_col, max_row;
>> + unsigned long cs, col, row, bank, dpath;
>> + unsigned long memsize;
>> +
>> + mtdcr(DCRN_SDRAM0_CFGADDR, 2);
>> + val = mfdcr(DCRN_SDRAM0_CFGDATA);
>
> Again, mfsdram() functions would be handy here.
>
>> + if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
>> + fatal("DDR controller is not initialized\n");
>> +
>> + /* get maximum cs col and row values */
>> + max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
>> + max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
>> + max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
>> +
>> + /* get CS value */
>> + mtdcr(DCRN_SDRAM0_CFGADDR, 10);
>> + val = mfdcr(DCRN_SDRAM0_CFGDATA);
>> +
>> + val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT);
>> + cs = 0;
>> + while (val) {
>> + if (val && 0x1)
>> + cs++;
>> + val = val >> 1;
>> + }
>> +
>> + if (!cs)
>> + fatal("No memory installed\n");
>> + if (cs > max_cs)
>> + fatal("DDR wrong CS configuration\n");
>> +
>> + /* get data path bytes */
>> + mtdcr(DCRN_SDRAM0_CFGADDR, 14);
>> + val = mfdcr(DCRN_SDRAM0_CFGDATA);
>> +
>> + if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT))
>> + dpath = 8; /* 64 bits */
>> + else
>> + dpath = 4; /* 32 bits */
>> +
>> + /* get adress pins (rows) */
>> + mtdcr(DCRN_SDRAM0_CFGADDR, 42);
>> + val = mfdcr(DCRN_SDRAM0_CFGDATA);
>> +
>> + row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT);
>> + if (row > max_row)
>> + fatal("DDR wrong APIN configuration\n");
>> + row = max_row - row;
>> +
>> + /* get collomn size and banks */
>> + mtdcr(DCRN_SDRAM0_CFGADDR, 43);
>> + val = mfdcr(DCRN_SDRAM0_CFGDATA);
>> +
>> + col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT);
>> + if (col > max_col)
>> + fatal("DDR wrong COL configuration\n");
>> + col = max_col - col;
>> +
>> + if (DDR_GET_VAL(val, DDR_BANK8, DDR_BANK8_SHIFT))
>> + bank = 8; /* 8 banks */
>> + else
>> + bank = 4; /* 4 banks */
>> +
>> + memsize = cs * (1 << (col+row)) * bank * dpath;
>> + dt_fixup_memory(0, memsize);
>> +}
>> +
>> +static void sequoia_fixups(void)
>> +{
>> + unsigned long sysclk = 33333333;
>
> Blank line after variable declaration please.
>
>> + ibm440ep_fixup_clocks(sysclk, 11059200);
>> + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
>> + ibm440epx_fixup_memsize();
>> + dt_fixup_mac_addresses(sequoia_mac0, sequoia_mac1);
>> +}
>> +
>> +void sequoia_init(void *mac0, void *mac1)
>> +{
>> + platform_ops.fixups = sequoia_fixups;
>> + platform_ops.exit = ibm44x_dbcr_reset;
>> + sequoia_mac0 = mac0;
>> + sequoia_mac1 = mac1;
>> + ft_init(_dtb_start, 0, 32);
>> + serial_console_init();
>> +}
>> diff -ruN linux.orig/arch/powerpc/boot/treeboot-sequoia.c
>> linux/arch/powerpc/boot/treeboot-sequoia.c ---
>> linux.orig/arch/powerpc/boot/treeboot-sequoia.c 1970-01-01
>> 03:00:00.000000000 +0300 +++
>> linux/arch/powerpc/boot/treeboot-sequoia.c 2007-07-27 20:44:26.000000000
>> +0400 @@ -0,0 +1,27 @@
>> +/*
>> + * Based on Bamboo code by Josh Boyer <jwboyer at linux.vnet.ibm.com>
>> + * Copyright IBM Corporation, 2007
>> + *
>> + * Based on ebony wrapper:
>> + * Copyright 2007 David Gibson, IBM Corporation.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * as published by the Free Software Foundation; version 2 of the License
>> + */
>> +#include "ops.h"
>> +#include "stdio.h"
>> +#include "44x.h"
>> +
>> +extern char _end[];
>> +
>> +BSS_STACK(4096);
>> +
>> +void platform_init(void)
>> +{
>> + unsigned long end_of_ram = 0x10000000;
>> + unsigned long avail_ram = end_of_ram - (unsigned long)_end;
>> +
>> + simple_alloc_init(_end, avail_ram, 32, 64);
>> + sequoia_init(NULL, NULL);
>> +}
>
> Best regards,
> Stefan
More information about the Linuxppc-dev
mailing list