[PATCH 4/6] PowerPC 440EPx: Sequoia bootwrapper
Stefan Roese
sr at denx.de
Tue Jul 31 15:54:56 EST 2007
On Monday 30 July 2007, Valentine Barshak wrote:
> A bootwrapper code for Sequoia.
>
> Signed-off-by: Valentine Barshak <vbarshak at ru.mvista.com>
> ---
> arch/powerpc/boot/44x.h | 1
> arch/powerpc/boot/Makefile | 6
> arch/powerpc/boot/cuboot-sequoia.c | 31 ++++
> arch/powerpc/boot/sequoia.c | 234
> +++++++++++++++++++++++++++++++++++
> arch/powerpc/boot/treeboot-sequoia.c | 27 ++++
Is treeboot-* really needed on Sequoia? From my understanding this is only
needed for platforms using OpenBIOS as bootloader.
> 5 files changed, 297 insertions(+), 2 deletions(-)
>
> diff -ruN linux.orig/arch/powerpc/boot/44x.h linux/arch/powerpc/boot/44x.h
> --- linux.orig/arch/powerpc/boot/44x.h 2007-07-27 20:37:10.000000000 +0400
> +++ linux/arch/powerpc/boot/44x.h 2007-07-27 20:44:26.000000000 +0400
> @@ -15,5 +15,6 @@
>
> void ibm44x_dbcr_reset(void);
> void ebony_init(void *mac0, void *mac1);
> +void sequoia_init(void *mac0, void *mac1);
>
> #endif /* _PPC_BOOT_44X_H_ */
> diff -ruN linux.orig/arch/powerpc/boot/cuboot-sequoia.c
> linux/arch/powerpc/boot/cuboot-sequoia.c ---
> linux.orig/arch/powerpc/boot/cuboot-sequoia.c 1970-01-01 03:00:00.000000000
> +0300 +++ linux/arch/powerpc/boot/cuboot-sequoia.c 2007-07-27
> 20:44:26.000000000 +0400 @@ -0,0 +1,31 @@
> +/*
> + * Old U-boot compatibility for Sequoia
> + *
> + * Based on Ebony code by David Gibson <david at gibson.dropbear.id.au>
> + *
> + * Copyright 2007 David Gibson, IBM Corporatio.
> + * Based on cuboot-83xx.c, which is:
> + * Copyright (c) 2007 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as
> published + * by the Free Software Foundation.
> + */
> +
> +#include "ops.h"
> +#include "stdio.h"
> +#include "44x.h"
> +#include "cuboot.h"
> +
> +#define TARGET_4xx
> +#define TARGET_44x
> +#include "ppcboot.h"
> +
> +static bd_t bd;
> +
> +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
> + unsigned long r6, unsigned long r7)
> +{
> + CUBOOT_INIT();
> + sequoia_init(&bd.bi_enetaddr, &bd.bi_enet1addr);
> +}
> diff -ruN linux.orig/arch/powerpc/boot/Makefile
> linux/arch/powerpc/boot/Makefile ---
> linux.orig/arch/powerpc/boot/Makefile 2007-07-27 20:37:10.000000000 +0400
> +++ linux/arch/powerpc/boot/Makefile 2007-07-27 20:44:26.000000000 +0400 @@
> -44,10 +44,11 @@
> src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c
> flatdevtree_misc.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \
> gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
> - 44x.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c
> + 44x.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c \
> + sequoia.c
> src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \
> cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
> - ps3-head.S ps3-hvcall.S ps3.c
> + ps3-head.S ps3-hvcall.S ps3.c treeboot-sequoia.c cuboot-sequoia.c
> src-boot := $(src-wlib) $(src-plat) empty.c
>
> src-boot := $(addprefix $(obj)/, $(src-boot))
> @@ -142,6 +143,7 @@
> image-$(CONFIG_PPC_83xx) += cuImage.83xx
> image-$(CONFIG_PPC_85xx) += cuImage.85xx
> image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
> +image-$(CONFIG_SEQUOIA) += treeImage.sequoia cuImage.sequoia
> endif
>
> # For 32-bit powermacs, build the COFF and miboot images
> diff -ruN linux.orig/arch/powerpc/boot/sequoia.c
> linux/arch/powerpc/boot/sequoia.c ---
> linux.orig/arch/powerpc/boot/sequoia.c 1970-01-01 03:00:00.000000000 +0300
> +++ linux/arch/powerpc/boot/sequoia.c 2007-07-27 20:59:09.000000000 +0400
> @@ -0,0 +1,234 @@
> +/*
> + * Based on Bamboo code by Josh Boyer <jwboyer at linux.vnet.ibm.com>
> + * Copyright IBM Corporation, 2007
> + *
> + * Based on ebony wrapper:
> + * Copyright 2007 David Gibson, IBM Corporation.
> + *
> + * Clocking code based on code by:
> + * Stefan Roese <sr at denx.de>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; version 2 of the License
> + */
> +#include <stdarg.h>
> +#include <stddef.h>
> +#include "types.h"
> +#include "elf.h"
> +#include "string.h"
> +#include "stdio.h"
> +#include "page.h"
> +#include "ops.h"
> +#include "dcr.h"
> +#include "44x.h"
> +
> +extern char _dtb_start[];
> +extern char _dtb_end[];
> +
> +static u8 *sequoia_mac0, *sequoia_mac1;
> +
> +#define SPRN_CCR1 0x378
> +void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
> +{
> + u32 cpu, plb, opb, ebc, tb, uart0, m, vco;
> + u32 reg;
> + u32 fwdva, fwdvb, fbdv, lfbdv, opbdv0, perdv0, spcid0, prbdv0, tmp;
> +
> + mtdcr(DCRN_CPR0_ADDR, CPR0_PLLD0);
> + reg = mfdcr(DCRN_CPR0_DATA);
How about adding mfcpr functions to access the CPR regs. Makes the source
better readable:
static inline u32 mfcpr(u32 reg)
{
mtdcr(DCRN_CPR0_ADDR, reg);
return mfdcr(DCRN_CPR0_DATA);
}
> + tmp = (reg & 0x000F0000) >> 16;
> + fwdva = tmp ? tmp : 16;
> + tmp = (reg & 0x00000700) >> 8;
> + fwdvb = tmp ? tmp : 8;
> + tmp = (reg & 0x1F000000) >> 24;
> + fbdv = tmp ? tmp : 32;
> + lfbdv = (reg & 0x0000007F);
> +
> + mtdcr(DCRN_CPR0_ADDR, CPR0_OPBD0);
> + reg = mfdcr(DCRN_CPR0_DATA);
> + tmp = (reg & 0x03000000) >> 24;
> + opbdv0 = tmp ? tmp : 4;
> +
> + mtdcr(DCRN_CPR0_ADDR, CPR0_PERD0);
> + reg = mfdcr(DCRN_CPR0_DATA);
> + tmp = (reg & 0x07000000) >> 24;
> + perdv0 = tmp ? tmp : 8;
> +
> + mtdcr(DCRN_CPR0_ADDR, CPR0_PRIMBD0);
> + reg = mfdcr(DCRN_CPR0_DATA);
> + tmp = (reg & 0x07000000) >> 24;
> + prbdv0 = tmp ? tmp : 8;
> +
> + mtdcr(DCRN_CPR0_ADDR, CPR0_SCPID);
> + reg = mfdcr(DCRN_CPR0_DATA);
> + tmp = (reg & 0x03000000) >> 24;
> + spcid0 = tmp ? tmp : 4;
> +
> + /* Calculate M */
> + mtdcr(DCRN_CPR0_ADDR, CPR0_PLLC0);
> + reg = mfdcr(DCRN_CPR0_DATA);
> + tmp = (reg & 0x03000000) >> 24;
> + if (tmp == 0) { /* PLL output */
> + tmp = (reg & 0x20000000) >> 29;
> + if (!tmp) /* PLLOUTA */
> + m = fbdv * lfbdv * fwdva;
> + else
> + m = fbdv * lfbdv * fwdvb;
> + }
> + else if (tmp == 1) /* CPU output */
> + m = fbdv * fwdva;
> + else
> + m = perdv0 * opbdv0 * fwdvb;
> +
> + vco = (m * sysclk) + (m >> 1);
> + cpu = vco / fwdva;
> + plb = vco / fwdvb / prbdv0;
> + opb = plb / opbdv0;
> + ebc = plb / perdv0;
> +
> + /* FIXME */
> + uart0 = ser_clk;
> +
> + /* Figure out timebase. Either CPU or default TmrClk */
> + asm volatile (
> + "mfspr %0,%1\n"
> + :
> + "=&r"(reg) : "i"(SPRN_CCR1));
> + if (reg & 0x0080)
> + tb = 25000000; /* TmrClk is 25MHz */
> + else
> + tb = cpu;
> +
> + dt_fixup_cpu_clocks(cpu, tb, 0);
> + dt_fixup_clock("/plb", plb);
> + dt_fixup_clock("/plb/opb", opb);
> + dt_fixup_clock("/plb/opb/ebc", ebc);
> + dt_fixup_clock("/plb/opb/serial at ef600300", uart0);
> + dt_fixup_clock("/plb/opb/serial at ef600400", uart0);
> + dt_fixup_clock("/plb/opb/serial at ef600500", uart0);
> + dt_fixup_clock("/plb/opb/serial at ef600600", uart0);
> +}
> +
> +
> +/*
> + * 440EPx DDR1/2 memory controller code
> + * TODO: move to generic 44x code
> + */
> +
> +/* DDR0_02 */
> +#define DDR_START 0x1
> +#define DDR_START_SHIFT 0
> +#define DDR_MAX_CS_REG 0x3
> +#define DDR_MAX_CS_REG_SHIFT 24
> +#define DDR_MAX_COL_REG 0xf
> +#define DDR_MAX_COL_REG_SHIFT 16
> +#define DDR_MAX_ROW_REG 0xf
> +#define DDR_MAX_ROW_REG_SHIFT 8
> +/* DDR0_08 */
> +#define DDR_DDR2_MODE 0x1
> +#define DDR_DDR2_MODE_SHIFT 0
> +/* DDR0_10 */
> +#define DDR_CS_MAP 0x3
> +#define DDR_CS_MAP_SHIFT 8
> +/* DDR0_14 */
> +#define DDR_REDUC 0x1
> +#define DDR_REDUC_SHIFT 16
> +/* DDR0_42 */
> +#define DDR_APIN 0x7
> +#define DDR_APIN_SHIFT 24
> +/* DDR0_43 */
> +#define DDR_COL_SZ 0x7
> +#define DDR_COL_SZ_SHIFT 8
> +#define DDR_BANK8 0x1
> +#define DDR_BANK8_SHIFT 0
> +
> +#define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask))
> +
> +static void ibm440epx_fixup_memsize(void)
> +{
> + unsigned long val, max_cs, max_col, max_row;
> + unsigned long cs, col, row, bank, dpath;
> + unsigned long memsize;
> +
> + mtdcr(DCRN_SDRAM0_CFGADDR, 2);
> + val = mfdcr(DCRN_SDRAM0_CFGDATA);
Again, mfsdram() functions would be handy here.
> + if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
> + fatal("DDR controller is not initialized\n");
> +
> + /* get maximum cs col and row values */
> + max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
> + max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
> + max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
> +
> + /* get CS value */
> + mtdcr(DCRN_SDRAM0_CFGADDR, 10);
> + val = mfdcr(DCRN_SDRAM0_CFGDATA);
> +
> + val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT);
> + cs = 0;
> + while (val) {
> + if (val && 0x1)
> + cs++;
> + val = val >> 1;
> + }
> +
> + if (!cs)
> + fatal("No memory installed\n");
> + if (cs > max_cs)
> + fatal("DDR wrong CS configuration\n");
> +
> + /* get data path bytes */
> + mtdcr(DCRN_SDRAM0_CFGADDR, 14);
> + val = mfdcr(DCRN_SDRAM0_CFGDATA);
> +
> + if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT))
> + dpath = 8; /* 64 bits */
> + else
> + dpath = 4; /* 32 bits */
> +
> + /* get adress pins (rows) */
> + mtdcr(DCRN_SDRAM0_CFGADDR, 42);
> + val = mfdcr(DCRN_SDRAM0_CFGDATA);
> +
> + row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT);
> + if (row > max_row)
> + fatal("DDR wrong APIN configuration\n");
> + row = max_row - row;
> +
> + /* get collomn size and banks */
> + mtdcr(DCRN_SDRAM0_CFGADDR, 43);
> + val = mfdcr(DCRN_SDRAM0_CFGDATA);
> +
> + col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT);
> + if (col > max_col)
> + fatal("DDR wrong COL configuration\n");
> + col = max_col - col;
> +
> + if (DDR_GET_VAL(val, DDR_BANK8, DDR_BANK8_SHIFT))
> + bank = 8; /* 8 banks */
> + else
> + bank = 4; /* 4 banks */
> +
> + memsize = cs * (1 << (col+row)) * bank * dpath;
> + dt_fixup_memory(0, memsize);
> +}
> +
> +static void sequoia_fixups(void)
> +{
> + unsigned long sysclk = 33333333;
Blank line after variable declaration please.
> + ibm440ep_fixup_clocks(sysclk, 11059200);
> + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
> + ibm440epx_fixup_memsize();
> + dt_fixup_mac_addresses(sequoia_mac0, sequoia_mac1);
> +}
> +
> +void sequoia_init(void *mac0, void *mac1)
> +{
> + platform_ops.fixups = sequoia_fixups;
> + platform_ops.exit = ibm44x_dbcr_reset;
> + sequoia_mac0 = mac0;
> + sequoia_mac1 = mac1;
> + ft_init(_dtb_start, 0, 32);
> + serial_console_init();
> +}
> diff -ruN linux.orig/arch/powerpc/boot/treeboot-sequoia.c
> linux/arch/powerpc/boot/treeboot-sequoia.c ---
> linux.orig/arch/powerpc/boot/treeboot-sequoia.c 1970-01-01
> 03:00:00.000000000 +0300 +++
> linux/arch/powerpc/boot/treeboot-sequoia.c 2007-07-27 20:44:26.000000000
> +0400 @@ -0,0 +1,27 @@
> +/*
> + * Based on Bamboo code by Josh Boyer <jwboyer at linux.vnet.ibm.com>
> + * Copyright IBM Corporation, 2007
> + *
> + * Based on ebony wrapper:
> + * Copyright 2007 David Gibson, IBM Corporation.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; version 2 of the License
> + */
> +#include "ops.h"
> +#include "stdio.h"
> +#include "44x.h"
> +
> +extern char _end[];
> +
> +BSS_STACK(4096);
> +
> +void platform_init(void)
> +{
> + unsigned long end_of_ram = 0x10000000;
> + unsigned long avail_ram = end_of_ram - (unsigned long)_end;
> +
> + simple_alloc_init(_end, avail_ram, 32, 64);
> + sequoia_init(NULL, NULL);
> +}
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
More information about the Linuxppc-dev
mailing list