[PATCH] powerpc: Add of_register_i2c_devices()
Guennadi Liakhovetski
g.liakhovetski at gmx.de
Sat Jul 21 06:26:15 EST 2007
On Fri, 20 Jul 2007, Segher Boessenkool wrote:
> > + strncpy(info->driver_name, i2c_devices[i].i2c_driver,
> > KOBJ_NAME_LEN);
> > + strncpy(info->type, i2c_devices[i].i2c_type, I2C_NAME_SIZE);
>
> Why not just strcpy(), btw?
Because target strings are finite length, and sources are just pointers to
some constant strings, which one might make arbitrarily long.
> > + addr = of_get_property(node, "reg", &len);
> > + if (!addr || len < sizeof(int) || *addr > 0xffff)
> > + continue;
>
> Give a warning when the addr won't fit in 16 bits?
Ok, version 3, hopefully last, below.
Thanks
Guennadi
---
Guennadi Liakhovetski
Scan the device tree for i2c devices, check their "compatible" property
against a hard-coded table, and, if found, register with i2c boardinfo.
Signed-off-by: G. Liakhovetski <g.liakhovetski at gmx.de>
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 3289fab..727453d 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -305,6 +305,64 @@ err:
arch_initcall(gfar_of_init);
+#ifdef CONFIG_I2C_BOARDINFO
+#include <linux/i2c.h>
+struct i2c_driver_device {
+ char *of_device;
+ char *i2c_driver;
+ char *i2c_type;
+};
+
+static struct i2c_driver_device i2c_devices[] __initdata = {
+ {"ricoh,rs5c372a", "rtc-rs5c372", "rs5c372a",},
+ {"ricoh,rs5c372b", "rtc-rs5c372", "rs5c372b",},
+ {"ricoh,rv5c386", "rtc-rs5c372", "rv5c386",},
+ {"ricoh,rv5c387a", "rtc-rs5c372", "rv5c387a",},
+};
+
+static int __init of_find_i2c_driver(struct device_node *node, struct i2c_board_info *info)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
+ if (!of_device_is_compatible(node, i2c_devices[i].of_device))
+ continue;
+ strncpy(info->driver_name, i2c_devices[i].i2c_driver, KOBJ_NAME_LEN);
+ strncpy(info->type, i2c_devices[i].i2c_type, I2C_NAME_SIZE);
+ return 0;
+ }
+ return -ENODEV;
+}
+
+static void __init of_register_i2c_devices(struct device_node *adap_node, int bus_num)
+{
+ struct device_node *node = NULL;
+
+ while ((node = of_get_next_child(adap_node, node))) {
+ struct i2c_board_info info;
+ const u32 *addr;
+ int len;
+
+ addr = of_get_property(node, "reg", &len);
+ if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
+ printk(KERN_WARNING "fsl_ioc.c: invalid i2c device entry\n");
+ continue;
+ }
+
+ info.irq = irq_of_parse_and_map(node, 0);
+ if (info.irq == NO_IRQ)
+ info.irq = -1;
+
+ if (of_find_i2c_driver(node, &info) < 0)
+ continue;
+
+ info.platform_data = NULL;
+ info.addr = *addr;
+
+ i2c_register_board_info(bus_num, &info, 1);
+ }
+}
+
static int __init fsl_i2c_of_init(void)
{
struct device_node *np;
@@ -349,6 +407,8 @@ static int __init fsl_i2c_of_init(void)
fsl_i2c_platform_data));
if (ret)
goto unreg;
+
+ of_register_i2c_devices(np, i);
}
return 0;
@@ -360,6 +420,7 @@ err:
}
arch_initcall(fsl_i2c_of_init);
+#endif
#ifdef CONFIG_PPC_83xx
static int __init mpc83xx_wdt_init(void)
More information about the Linuxppc-dev
mailing list