[PATCH 19/61] 8xx: Fix CONFIG_PIN_TLB.

[Scott Wood]

1. Only map 512K of the IMMR, rather than 8M, to avoid conflicting with
the default ioremap region.
2. The wrong register was being loaded into SPRN_MD_RPN.

Signed-off-by: Scott Wood <scottwood at freescale.com>
---
Apparently I missed sending this one yesterday...

 arch/powerpc/kernel/head_8xx.S |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 7488f30..c1469f3 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -701,7 +701,7 @@ initial_mmu:
 	mtspr	SPRN_MI_AP, r8
 	mtspr	SPRN_MD_AP, r8
 
-	/* Map another 8 MByte at the IMMR to get the processor
+	/* Map another 512 KByte at the IMMR to get the processor
 	 * internal registers (among other things).
 	 */
 #ifdef CONFIG_PIN_TLB
@@ -714,7 +714,7 @@ initial_mmu:
 	mr	r8, r9			/* Create vaddr for TLB */
 	ori	r8, r8, MD_EVALID	/* Mark it valid */
 	mtspr	SPRN_MD_EPN, r8
-	li	r8, MD_PS8MEG		/* Set 8M byte page */
+	li	r8, MD_PS512K		/* Set 512K byte page */
 	ori	r8, r8, MD_SVALID	/* Make it valid */
 	mtspr	SPRN_MD_TWC, r8
 	mr	r8, r9			/* Create paddr for TLB */
@@ -736,13 +736,13 @@ initial_mmu:
 	mtspr	SPRN_MD_TWC, r9
 	li	r11, MI_BOOTINIT	/* Create RPN for address 0 */
 	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r8
+	mtspr	SPRN_MD_RPN, r11
 
 	addis	r8, r8, 0x0080		/* Add 8M */
 	mtspr	SPRN_MD_EPN, r8
 	mtspr	SPRN_MD_TWC, r9
 	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r8
+	mtspr	SPRN_MD_RPN, r11
 #endif
 
 	/* Since the cache is enabled according to the information we
-- 
1.5.0.3