[PATCH 17/61] bootwrapper: Add 8xx support.

[Scott Wood]

David Gibson wrote:
> On Tue, Jul 17, 2007 at 08:33:18PM -0500, Scott Wood wrote:
> [snip]
> 
>>diff --git a/arch/powerpc/boot/cuboot-8xx.c b/arch/powerpc/boot/cuboot-8xx.c
>>new file mode 100644
>>index 0000000..35476a0
>>--- /dev/null
>>+++ b/arch/powerpc/boot/cuboot-8xx.c
>>@@ -0,0 +1,47 @@
>>+/*
>>+ * Old U-boot compatibility for 8xx
>>+ *
>>+ * Author: Scott Wood <scottwood at freescale.com>
>>+ *
>>+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
>>+ *
>>+ * This program is free software; you can redistribute it and/or modify it
>>+ * under the terms of the GNU General Public License version 2 as published
>>+ * by the Free Software Foundation.
>>+ */
>>+
>>+#include "ops.h"
>>+#include "stdio.h"
>>+#include "cuboot.h"
>>+
>>+#define TARGET_8xx
>>+#define TARGET_HAS_ETH1
> 
>            ^^^^^^^^^^^^^^^
> Is that really true for all 8xx boards?

Well, no.  Even on a given board, it depends on the version of u-boot.

There's nothing after enet1addr that the bootwrapper cares about, 
though, so the only harm is if the device tree has a second network 
interface but u-boot doesn't know about it, and the bootwrapper ends up 
pulling in junk rather than leaving zeroes.

-Scott