[PATCH 02/61] mpc8272ads.dts: Whitespace cleanup
Scott Wood
scottwood at freescale.com
Wed Jul 18 11:32:56 EST 2007
Convert spaces to tabs, and add a few newlines where appropriate.
Signed-off-by: Scott Wood <scottwood at freescale.com>
---
arch/powerpc/boot/dts/mpc8272ads.dts | 376 +++++++++++++++++-----------------
1 files changed, 189 insertions(+), 187 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 1934b80..4d09dca 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -10,207 +10,209 @@
*/
/ {
- model = "MPC8272ADS";
- compatible = "MPC8260ADS";
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8272 at 0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <4000>; // L1, 16K
- i-cache-size = <4000>; // L1, 16K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- 32-bit;
- };
- };
-
- pci_pic: interrupt-controller at f8200000 {
- #address-cells = <0>;
- #interrupt-cells = <2>;
- interrupt-controller;
- reg = <f8200000 f8200004>;
- built-in;
- device_type = "pci-pic";
- };
- memory {
- device_type = "memory";
- reg = <00000000 4000000 f4500000 00000020>;
- };
-
- chosen {
- name = "chosen";
- linux,platform = <0>;
+ model = "MPC8272ADS";
+ compatible = "MPC8260ADS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8272 at 0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ 32-bit;
+ };
+ };
+
+ pci_pic: interrupt-controller at f8200000 {
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <f8200000 f8200004>;
+ built-in;
+ device_type = "pci-pic";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 4000000 f4500000 00000020>;
+ };
+
+ chosen {
+ name = "chosen";
+ linux,platform = <0>;
interrupt-controller = <&Cpm_pic>;
- };
-
- soc8272 at f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- #interrupt-cells = <2>;
- device_type = "soc";
- ranges = <00000000 f0000000 00053000>;
- reg = <f0000000 10000>;
-
- mdio at 0 {
- device_type = "mdio";
- compatible = "fs_enet";
- reg = <0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ };
+
+ soc8272 at f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <00000000 f0000000 00053000>;
+ reg = <f0000000 10000>;
+
+ mdio at 0 {
+ device_type = "mdio";
+ compatible = "fs_enet";
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
phy0:ethernet-phy at 0 {
interrupt-parent = <&Cpm_pic>;
- interrupts = <17 4>;
- reg = <0>;
- bitbang = [ 12 12 13 02 02 01 ];
- device_type = "ethernet-phy";
- };
+ interrupts = <17 4>;
+ reg = <0>;
+ bitbang = [ 12 12 13 02 02 01 ];
+ device_type = "ethernet-phy";
+ };
+
phy1:ethernet-phy at 1 {
interrupt-parent = <&Cpm_pic>;
- interrupts = <17 4>;
- bitbang = [ 12 12 13 02 02 01 ];
- reg = <3>;
- device_type = "ethernet-phy";
- };
- };
-
- ethernet at 24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- device_type = "network";
- device-id = <1>;
- compatible = "fs_enet";
- model = "FCC";
- reg = <11300 20 8400 100 11380 30>;
- mac-address = [ 00 11 2F 99 43 54 ];
- interrupts = <20 2>;
+ interrupts = <17 4>;
+ bitbang = [ 12 12 13 02 02 01 ];
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet at 24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ device-id = <1>;
+ compatible = "fs_enet";
+ model = "FCC";
+ reg = <11300 20 8400 100 11380 30>;
+ mac-address = [ 00 11 2F 99 43 54 ];
+ interrupts = <20 2>;
interrupt-parent = <&Cpm_pic>;
phy-handle = <&Phy0>;
- rx-clock = <13>;
- tx-clock = <12>;
- };
-
- ethernet at 25000 {
- device_type = "network";
- device-id = <2>;
- compatible = "fs_enet";
- model = "FCC";
- reg = <11320 20 8500 100 113b0 30>;
- mac-address = [ 00 11 2F 99 44 54 ];
- interrupts = <21 2>;
+ rx-clock = <13>;
+ tx-clock = <12>;
+ };
+
+ ethernet at 25000 {
+ device_type = "network";
+ device-id = <2>;
+ compatible = "fs_enet";
+ model = "FCC";
+ reg = <11320 20 8500 100 113b0 30>;
+ mac-address = [ 00 11 2F 99 44 54 ];
+ interrupts = <21 2>;
interrupt-parent = <&Cpm_pic>;
phy-handle = <&Phy1>;
- rx-clock = <17>;
- tx-clock = <18>;
- };
-
- cpm at f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- #interrupt-cells = <2>;
- device_type = "cpm";
- model = "CPM2";
- ranges = <00000000 00000000 20000>;
- reg = <0 20000>;
- command-proc = <119c0>;
- brg-frequency = <17D7840>;
- cpm_clk = <BEBC200>;
-
- scc at 11a00 {
- device_type = "serial";
- compatible = "cpm_uart";
- model = "SCC";
- device-id = <1>;
- reg = <11a00 20 8000 100>;
- current-speed = <1c200>;
- interrupts = <28 2>;
+ rx-clock = <17>;
+ tx-clock = <18>;
+ };
+
+ cpm at f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "cpm";
+ model = "CPM2";
+ ranges = <00000000 00000000 20000>;
+ reg = <0 20000>;
+ command-proc = <119c0>;
+ brg-frequency = <17D7840>;
+ cpm_clk = <BEBC200>;
+
+ scc at 11a00 {
+ device_type = "serial";
+ compatible = "cpm_uart";
+ model = "SCC";
+ device-id = <1>;
+ reg = <11a00 20 8000 100>;
+ current-speed = <1c200>;
+ interrupts = <28 2>;
interrupt-parent = <&Cpm_pic>;
- clock-setup = <0 00ffffff>;
- rx-clock = <1>;
- tx-clock = <1>;
- };
-
- scc at 11a60 {
- device_type = "serial";
- compatible = "cpm_uart";
- model = "SCC";
- device-id = <4>;
- reg = <11a60 20 8300 100>;
- current-speed = <1c200>;
- interrupts = <2b 2>;
+ clock-setup = <0 00ffffff>;
+ rx-clock = <1>;
+ tx-clock = <1>;
+ };
+
+ scc at 11a60 {
+ device_type = "serial";
+ compatible = "cpm_uart";
+ model = "SCC";
+ device-id = <4>;
+ reg = <11a60 20 8300 100>;
+ current-speed = <1c200>;
+ interrupts = <2b 2>;
interrupt-parent = <&Cpm_pic>;
- clock-setup = <1b ffffff00>;
- rx-clock = <4>;
- tx-clock = <4>;
- };
-
- };
- cpm_pic:interrupt-controller at 10c00 {
- #address-cells = <0>;
- #interrupt-cells = <2>;
- interrupt-controller;
- reg = <10c00 80>;
- built-in;
- device_type = "cpm-pic";
- compatible = "CPM2";
- };
- pci at 0500 {
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- compatible = "8272";
- device_type = "pci";
- reg = <10430 4dc>;
- clock-frequency = <3f940aa>;
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x16 */
- b000 0 0 1 f8200000 40 8
- b000 0 0 2 f8200000 41 8
- b000 0 0 3 f8200000 42 8
- b000 0 0 4 f8200000 43 8
-
- /* IDSEL 0x17 */
- b800 0 0 1 f8200000 43 8
- b800 0 0 2 f8200000 40 8
- b800 0 0 3 f8200000 41 8
- b800 0 0 4 f8200000 42 8
-
- /* IDSEL 0x18 */
- c000 0 0 1 f8200000 42 8
- c000 0 0 2 f8200000 43 8
- c000 0 0 3 f8200000 40 8
- c000 0 0 4 f8200000 41 8>;
+ clock-setup = <1b ffffff00>;
+ rx-clock = <4>;
+ tx-clock = <4>;
+ };
+ };
+
+ cpm_pic:interrupt-controller at 10c00 {
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <10c00 80>;
+ built-in;
+ device_type = "cpm-pic";
+ compatible = "CPM2";
+ };
+
+ pci at 0500 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "8272";
+ device_type = "pci";
+ reg = <10430 4dc>;
+ clock-frequency = <3f940aa>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x16 */
+ b000 0 0 1 f8200000 40 8
+ b000 0 0 2 f8200000 41 8
+ b000 0 0 3 f8200000 42 8
+ b000 0 0 4 f8200000 43 8
+
+ /* IDSEL 0x17 */
+ b800 0 0 1 f8200000 43 8
+ b800 0 0 2 f8200000 40 8
+ b800 0 0 3 f8200000 41 8
+ b800 0 0 4 f8200000 42 8
+
+ /* IDSEL 0x18 */
+ c000 0 0 1 f8200000 42 8
+ c000 0 0 2 f8200000 43 8
+ c000 0 0 3 f8200000 40 8
+ c000 0 0 4 f8200000 41 8>;
interrupt-parent = <&Cpm_pic>;
- interrupts = <14 8>;
- bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 40000000
- 01000000 0 00000000 f6000000 0 02000000>;
- };
+ interrupts = <14 8>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 40000000
+ 01000000 0 00000000 f6000000 0 02000000>;
+ };
/* May need to remove if on a part without crypto engine */
- crypto at 30000 {
- device_type = "crypto";
- model = "SEC2";
- compatible = "talitos";
- reg = <30000 10000>;
- interrupts = <b 2>;
+ crypto at 30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";
+ reg = <30000 10000>;
+ interrupts = <b 2>;
interrupt-parent = <&Cpm_pic>;
- num-channels = <4>;
- channel-fifo-len = <18>;
- exec-units-mask = <0000007e>;
+ num-channels = <4>;
+ channel-fifo-len = <18>;
+ exec-units-mask = <0000007e>;
/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
- descriptor-types-mask = <01010ebf>;
- };
-
- };
+ descriptor-types-mask = <01010ebf>;
+ };
+ };
};
--
1.5.0.3
More information about the Linuxppc-dev
mailing list