[PATCH] powerpc: mpc5200 low power mode
Sylvain Munaut
tnt at 246tNt.com
Wed Jul 18 06:32:31 EST 2007
From: Domen Puncer <domen.puncer at telargo.com>
Low-power mode implementation for Lite5200b.
Some I/O registers are also saved here.
A recent U-Boot that supports this (lite5200b_PM_config) is needed.
Signed-off-by: Domen Puncer <domen.puncer at telargo.com>
Signed-off-by: Sylvain Munaut <tnt at 246tNt.com>
---
Hi Paulus,
Could you push this with you next merge ? It's the support for lite5200 low power
mode, posted on -embedded a few days ago.
Sylvain
---
arch/powerpc/platforms/52xx/Makefile | 3 +
arch/powerpc/platforms/52xx/lite5200.c | 14 +-
arch/powerpc/platforms/52xx/lite5200_pm.c | 213 +++++++++++++
arch/powerpc/platforms/52xx/lite5200_sleep.S | 413 ++++++++++++++++++++++++++
include/asm-powerpc/mpc52xx.h | 10 +
5 files changed, 648 insertions(+), 5 deletions(-)
create mode 100644 arch/powerpc/platforms/52xx/lite5200_pm.c
create mode 100644 arch/powerpc/platforms/52xx/lite5200_sleep.S
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index b91e39c..307dbc1 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -10,3 +10,6 @@ obj-$(CONFIG_PPC_EFIKA) += efika.o
obj-$(CONFIG_PPC_LITE5200) += lite5200.o
obj-$(CONFIG_PM) += mpc52xx_sleep.o mpc52xx_pm.o
+ifeq ($(CONFIG_PPC_LITE5200),y)
+ obj-$(CONFIG_PM) += lite5200_sleep.o lite5200_pm.o
+endif
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index 5c46e89..16eb5ad 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -86,7 +86,6 @@ error:
}
#ifdef CONFIG_PM
-static u32 descr_a;
static void lite5200_suspend_prepare(void __iomem *mbar)
{
u8 pin = 1; /* GPIO_WKUP_1 (GPIO_PSC2_4) */
@@ -97,13 +96,18 @@ static void lite5200_suspend_prepare(void __iomem *mbar)
* power down usb port
* this needs to be called before of-ohci suspend code
*/
- descr_a = in_be32(mbar + 0x1048);
- out_be32(mbar + 0x1048, (descr_a & ~0x200) | 0x100);
+
+ /* set ports to "power switched" and "powered at the same time"
+ * USB Rh descriptor A: NPS = 0, PSM = 0 */
+ out_be32(mbar + 0x1048, in_be32(mbar + 0x1048) & ~0x300);
+ /* USB Rh status: LPS = 1 - turn off power */
+ out_be32(mbar + 0x1050, 0x00000001);
}
static void lite5200_resume_finish(void __iomem *mbar)
{
- out_be32(mbar + 0x1048, descr_a);
+ /* USB Rh status: LPSC = 1 - turn on power */
+ out_be32(mbar + 0x1050, 0x00010000);
}
#endif
@@ -132,7 +136,7 @@ static void __init lite5200_setup_arch(void)
#ifdef CONFIG_PM
mpc52xx_suspend.board_suspend_prepare = lite5200_suspend_prepare;
mpc52xx_suspend.board_resume_finish = lite5200_resume_finish;
- mpc52xx_pm_init();
+ lite5200_pm_init();
#endif
#ifdef CONFIG_PCI
diff --git a/arch/powerpc/platforms/52xx/lite5200_pm.c b/arch/powerpc/platforms/52xx/lite5200_pm.c
new file mode 100644
index 0000000..f26afcd
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/lite5200_pm.c
@@ -0,0 +1,213 @@
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/mpc52xx.h>
+#include "mpc52xx_pic.h"
+
+/* defined in lite5200_sleep.S and only used here */
+extern void lite5200_low_power(void __iomem *sram, void __iomem *mbar);
+
+static struct mpc52xx_cdm __iomem *cdm;
+static struct mpc52xx_intr __iomem *pic;
+static struct mpc52xx_sdma __iomem *bes;
+static struct mpc52xx_xlb __iomem *xlb;
+static struct mpc52xx_gpio __iomem *gps;
+static struct mpc52xx_gpio_wkup __iomem *gpw;
+static void __iomem *sram;
+static const int sram_size = 0x4000; /* 16 kBytes */
+static void __iomem *mbar;
+
+static int lite5200_pm_valid(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static int lite5200_pm_prepare(suspend_state_t state)
+{
+ /* deep sleep? let mpc52xx code handle that */
+ if (state == PM_SUSPEND_STANDBY)
+ return mpc52xx_pm_prepare(state);
+
+ if (state != PM_SUSPEND_MEM)
+ return -EINVAL;
+
+ /* map registers */
+ mbar = mpc52xx_find_and_map("mpc5200");
+ if (!mbar) {
+ printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__);
+ return -ENOSYS;
+ }
+
+ cdm = mbar + 0x200;
+ pic = mbar + 0x500;
+ gps = mbar + 0xb00;
+ gpw = mbar + 0xc00;
+ bes = mbar + 0x1200;
+ xlb = mbar + 0x1f00;
+ sram = mbar + 0x8000;
+
+ return 0;
+}
+
+/* save and restore registers not bound to any real devices */
+static struct mpc52xx_cdm scdm;
+static struct mpc52xx_intr spic;
+static struct mpc52xx_sdma sbes;
+static struct mpc52xx_xlb sxlb;
+static struct mpc52xx_gpio sgps;
+static struct mpc52xx_gpio_wkup sgpw;
+
+static void lite5200_save_regs(void)
+{
+ _memcpy_fromio(&spic, pic, sizeof(*pic));
+ _memcpy_fromio(&sbes, bes, sizeof(*bes));
+ _memcpy_fromio(&scdm, cdm, sizeof(*cdm));
+ _memcpy_fromio(&sxlb, xlb, sizeof(*xlb));
+ _memcpy_fromio(&sgps, gps, sizeof(*gps));
+ _memcpy_fromio(&sgpw, gpw, sizeof(*gpw));
+
+ _memcpy_fromio(saved_sram, sram, sram_size);
+}
+
+static void lite5200_restore_regs(void)
+{
+ int i;
+ _memcpy_toio(sram, saved_sram, sram_size);
+
+
+ /*
+ * GPIOs. Interrupt Master Enable has higher address then other
+ * registers, so just memcpy is ok.
+ */
+ _memcpy_toio(gpw, &sgpw, sizeof(*gpw));
+ _memcpy_toio(gps, &sgps, sizeof(*gps));
+
+
+ /* XLB Arbitrer */
+ out_be32(&xlb->snoop_window, sxlb.snoop_window);
+ out_be32(&xlb->master_priority, sxlb.master_priority);
+ out_be32(&xlb->master_pri_enable, sxlb.master_pri_enable);
+
+ /* enable */
+ out_be32(&xlb->int_enable, sxlb.int_enable);
+ out_be32(&xlb->config, sxlb.config);
+
+
+ /* CDM - Clock Distribution Module */
+ out_8(&cdm->ipb_clk_sel, scdm.ipb_clk_sel);
+ out_8(&cdm->pci_clk_sel, scdm.pci_clk_sel);
+
+ out_8(&cdm->ext_48mhz_en, scdm.ext_48mhz_en);
+ out_8(&cdm->fd_enable, scdm.fd_enable);
+ out_be16(&cdm->fd_counters, scdm.fd_counters);
+
+ out_be32(&cdm->clk_enables, scdm.clk_enables);
+
+ out_8(&cdm->osc_disable, scdm.osc_disable);
+
+ out_be16(&cdm->mclken_div_psc1, scdm.mclken_div_psc1);
+ out_be16(&cdm->mclken_div_psc2, scdm.mclken_div_psc2);
+ out_be16(&cdm->mclken_div_psc3, scdm.mclken_div_psc3);
+ out_be16(&cdm->mclken_div_psc6, scdm.mclken_div_psc6);
+
+
+ /* BESTCOMM */
+ out_be32(&bes->taskBar, sbes.taskBar);
+ out_be32(&bes->currentPointer, sbes.currentPointer);
+ out_be32(&bes->endPointer, sbes.endPointer);
+ out_be32(&bes->variablePointer, sbes.variablePointer);
+
+ out_8(&bes->IntVect1, sbes.IntVect1);
+ out_8(&bes->IntVect2, sbes.IntVect2);
+ out_be16(&bes->PtdCntrl, sbes.PtdCntrl);
+
+ for (i=0; i<32; i++)
+ out_8(&bes->ipr[i], sbes.ipr[i]);
+
+ out_be32(&bes->cReqSelect, sbes.cReqSelect);
+ out_be32(&bes->task_size0, sbes.task_size0);
+ out_be32(&bes->task_size1, sbes.task_size1);
+ out_be32(&bes->MDEDebug, sbes.MDEDebug);
+ out_be32(&bes->ADSDebug, sbes.ADSDebug);
+ out_be32(&bes->Value1, sbes.Value1);
+ out_be32(&bes->Value2, sbes.Value2);
+ out_be32(&bes->Control, sbes.Control);
+ out_be32(&bes->Status, sbes.Status);
+ out_be32(&bes->PTDDebug, sbes.PTDDebug);
+
+ /* restore tasks */
+ for (i=0; i<16; i++)
+ out_be16(&bes->tcr[i], sbes.tcr[i]);
+
+ /* enable interrupts */
+ out_be32(&bes->IntPend, sbes.IntPend);
+ out_be32(&bes->IntMask, sbes.IntMask);
+
+
+ /* PIC */
+ out_be32(&pic->per_pri1, spic.per_pri1);
+ out_be32(&pic->per_pri2, spic.per_pri2);
+ out_be32(&pic->per_pri3, spic.per_pri3);
+
+ out_be32(&pic->main_pri1, spic.main_pri1);
+ out_be32(&pic->main_pri2, spic.main_pri2);
+
+ out_be32(&pic->enc_status, spic.enc_status);
+
+ /* unmask and enable interrupts */
+ out_be32(&pic->per_mask, spic.per_mask);
+ out_be32(&pic->main_mask, spic.main_mask);
+ out_be32(&pic->ctrl, spic.ctrl);
+}
+
+static int lite5200_pm_enter(suspend_state_t state)
+{
+ /* deep sleep? let mpc52xx code handle that */
+ if (state == PM_SUSPEND_STANDBY) {
+ return mpc52xx_pm_enter(state);
+ }
+
+ lite5200_save_regs();
+
+ /* effectively save FP regs */
+ enable_kernel_fp();
+
+ lite5200_low_power(sram, mbar);
+
+ lite5200_restore_regs();
+
+ /* restart jiffies */
+ wakeup_decrementer();
+
+ iounmap(mbar);
+ return 0;
+}
+
+static int lite5200_pm_finish(suspend_state_t state)
+{
+ /* deep sleep? let mpc52xx code handle that */
+ if (state == PM_SUSPEND_STANDBY) {
+ return mpc52xx_pm_finish(state);
+ }
+ return 0;
+}
+
+static struct pm_ops lite5200_pm_ops = {
+ .valid = lite5200_pm_valid,
+ .prepare = lite5200_pm_prepare,
+ .enter = lite5200_pm_enter,
+ .finish = lite5200_pm_finish,
+};
+
+int __init lite5200_pm_init(void)
+{
+ pm_set_ops(&lite5200_pm_ops);
+ return 0;
+}
diff --git a/arch/powerpc/platforms/52xx/lite5200_sleep.S b/arch/powerpc/platforms/52xx/lite5200_sleep.S
new file mode 100644
index 0000000..2064119
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/lite5200_sleep.S
@@ -0,0 +1,413 @@
+#include <asm/reg.h>
+#include <asm/ppc_asm.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+
+
+#define SDRAM_CTRL 0x104
+#define SC_MODE_EN (1<<31)
+#define SC_CKE (1<<30)
+#define SC_REF_EN (1<<28)
+#define SC_SOFT_PRE (1<<1)
+
+#define GPIOW_GPIOE 0xc00
+#define GPIOW_DDR 0xc08
+#define GPIOW_DVO 0xc0c
+
+#define CDM_CE 0x214
+#define CDM_SDRAM (1<<3)
+
+
+/* helpers... beware: r10 and r4 are overwritten */
+#define SAVE_SPRN(reg, addr) \
+ mfspr r10, SPRN_##reg; \
+ stw r10, ((addr)*4)(r4);
+
+#define LOAD_SPRN(reg, addr) \
+ lwz r10, ((addr)*4)(r4); \
+ mtspr SPRN_##reg, r10; \
+ sync; \
+ isync;
+
+
+ .data
+registers:
+ .space 0x5c*4
+ .text
+
+/* ---------------------------------------------------------------------- */
+/* low-power mode with help of M68HLC908QT1 */
+
+ .globl lite5200_low_power
+lite5200_low_power:
+
+ mr r7, r3 /* save SRAM va */
+ mr r8, r4 /* save MBAR va */
+
+ /* setup wakeup address for u-boot at physical location 0x0 */
+ lis r3, CONFIG_KERNEL_START at h
+ lis r4, lite5200_wakeup at h
+ ori r4, r4, lite5200_wakeup at l
+ sub r4, r4, r3
+ stw r4, 0(r3)
+
+
+ /*
+ * save stuff BDI overwrites
+ * 0xf0 (0xe0->0x100 gets overwritten when BDI connected;
+ * even when CONFIG_BDI* is disabled and MMU XLAT commented; heisenbug?))
+ * WARNING: self-refresh doesn't seem to work when BDI2000 is connected,
+ * possibly because BDI sets SDRAM registers before wakeup code does
+ */
+ lis r4, registers at h
+ ori r4, r4, registers at l
+ lwz r10, 0xf0(r3)
+ stw r10, (0x1d*4)(r4)
+
+ /* save registers to r4 [destroys r10] */
+ SAVE_SPRN(LR, 0x1c)
+ bl save_regs
+
+ /* flush caches [destroys r3, r4] */
+ bl flush_data_cache
+
+
+ /* copy code to sram */
+ mr r4, r7
+ li r3, (sram_code_end - sram_code)/4
+ mtctr r3
+ lis r3, sram_code at h
+ ori r3, r3, sram_code at l
+1:
+ lwz r5, 0(r3)
+ stw r5, 0(r4)
+ addi r3, r3, 4
+ addi r4, r4, 4
+ bdnz 1b
+
+ /* get tb_ticks_per_usec */
+ lis r3, tb_ticks_per_usec at h
+ lwz r11, tb_ticks_per_usec at l(r3)
+
+ /* disable I and D caches */
+ mfspr r3, SPRN_HID0
+ ori r3, r3, HID0_ICE | HID0_DCE
+ xori r3, r3, HID0_ICE | HID0_DCE
+ sync; isync;
+ mtspr SPRN_HID0, r3
+ sync; isync;
+
+ /* jump to sram */
+ mtlr r7
+ blrl
+ /* doesn't return */
+
+
+sram_code:
+ /* self refresh */
+ lwz r4, SDRAM_CTRL(r8)
+
+ /* send NOP (precharge) */
+ oris r4, r4, SC_MODE_EN at h /* mode_en */
+ stw r4, SDRAM_CTRL(r8)
+ sync
+
+ ori r4, r4, SC_SOFT_PRE /* soft_pre */
+ stw r4, SDRAM_CTRL(r8)
+ sync
+ xori r4, r4, SC_SOFT_PRE
+
+ xoris r4, r4, SC_MODE_EN at h /* !mode_en */
+ stw r4, SDRAM_CTRL(r8)
+ sync
+
+ /* delay (for NOP to finish) */
+ li r12, 1
+ bl udelay
+
+ /*
+ * mode_en must not be set when enabling self-refresh
+ * send AR with CKE low (self-refresh)
+ */
+ oris r4, r4, (SC_REF_EN | SC_CKE)@h
+ xoris r4, r4, (SC_CKE)@h /* ref_en !cke */
+ stw r4, SDRAM_CTRL(r8)
+ sync
+
+ /* delay (after !CKE there should be two cycles) */
+ li r12, 1
+ bl udelay
+
+ /* disable clock */
+ lwz r4, CDM_CE(r8)
+ ori r4, r4, CDM_SDRAM
+ xori r4, r4, CDM_SDRAM
+ stw r4, CDM_CE(r8)
+ sync
+
+ /* delay a bit */
+ li r12, 1
+ bl udelay
+
+
+ /* turn off with QT chip */
+ li r4, 0x02
+ stb r4, GPIOW_GPIOE(r8) /* enable gpio_wkup1 */
+ sync
+
+ stb r4, GPIOW_DVO(r8) /* "output" high */
+ sync
+ stb r4, GPIOW_DDR(r8) /* output */
+ sync
+ stb r4, GPIOW_DVO(r8) /* output high */
+ sync
+
+ /* 10uS delay */
+ li r12, 10
+ bl udelay
+
+ /* turn off */
+ li r4, 0
+ stb r4, GPIOW_DVO(r8) /* output low */
+ sync
+
+ /* wait until we're offline */
+ 1:
+ b 1b
+
+
+ /* local udelay in sram is needed */
+ udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
+ mullw r12, r12, r11
+ mftb r13 /* start */
+ addi r12, r13, r12 /* end */
+ 1:
+ mftb r13 /* current */
+ cmp cr0, r13, r12
+ blt 1b
+ blr
+
+sram_code_end:
+
+
+
+/* uboot jumps here on resume */
+lite5200_wakeup:
+ bl restore_regs
+
+
+ /* HIDs, MSR */
+ LOAD_SPRN(HID1, 0x19)
+ LOAD_SPRN(HID2, 0x1a)
+
+
+ /* address translation is tricky (see turn_on_mmu) */
+ mfmsr r10
+ ori r10, r10, MSR_DR | MSR_IR
+
+
+ mtspr SPRN_SRR1, r10
+ lis r10, mmu_on at h
+ ori r10, r10, mmu_on at l
+ mtspr SPRN_SRR0, r10
+ sync
+ rfi
+mmu_on:
+ /* kernel offset (r4 is still set from restore_registers) */
+ addis r4, r4, CONFIG_KERNEL_START at h
+
+
+ /* restore MSR */
+ lwz r10, (4*0x1b)(r4)
+ mtmsr r10
+ sync; isync;
+
+ /* invalidate caches */
+ mfspr r10, SPRN_HID0
+ ori r5, r10, HID0_ICFI | HID0_DCI
+ mtspr SPRN_HID0, r5 /* invalidate caches */
+ sync; isync;
+ mtspr SPRN_HID0, r10
+ sync; isync;
+
+ /* enable caches */
+ lwz r10, (4*0x18)(r4)
+ mtspr SPRN_HID0, r10 /* restore (enable caches, DPM) */
+ /* ^ this has to be after address translation set in MSR */
+ sync
+ isync
+
+
+ /* restore 0xf0 (BDI2000) */
+ lis r3, CONFIG_KERNEL_START at h
+ lwz r10, (0x1d*4)(r4)
+ stw r10, 0xf0(r3)
+
+ LOAD_SPRN(LR, 0x1c)
+
+
+ blr
+
+
+/* ---------------------------------------------------------------------- */
+/* boring code: helpers */
+
+/* save registers */
+#define SAVE_BAT(n, addr) \
+ SAVE_SPRN(DBAT##n##L, addr); \
+ SAVE_SPRN(DBAT##n##U, addr+1); \
+ SAVE_SPRN(IBAT##n##L, addr+2); \
+ SAVE_SPRN(IBAT##n##U, addr+3);
+
+#define SAVE_SR(n, addr) \
+ mfsr r10, n; \
+ stw r10, ((addr)*4)(r4);
+
+#define SAVE_4SR(n, addr) \
+ SAVE_SR(n, addr); \
+ SAVE_SR(n+1, addr+1); \
+ SAVE_SR(n+2, addr+2); \
+ SAVE_SR(n+3, addr+3);
+
+save_regs:
+ stw r0, 0(r4)
+ stw r1, 0x4(r4)
+ stw r2, 0x8(r4)
+ stmw r11, 0xc(r4) /* 0xc -> 0x5f, (0x18*4-1) */
+
+ SAVE_SPRN(HID0, 0x18)
+ SAVE_SPRN(HID1, 0x19)
+ SAVE_SPRN(HID2, 0x1a)
+ mfmsr r10
+ stw r10, (4*0x1b)(r4)
+ /*SAVE_SPRN(LR, 0x1c) have to save it before the call */
+ /* 0x1d reserved by 0xf0 */
+ SAVE_SPRN(RPA, 0x1e)
+ SAVE_SPRN(SDR1, 0x1f)
+
+ /* save MMU regs */
+ SAVE_BAT(0, 0x20)
+ SAVE_BAT(1, 0x24)
+ SAVE_BAT(2, 0x28)
+ SAVE_BAT(3, 0x2c)
+ SAVE_BAT(4, 0x30)
+ SAVE_BAT(5, 0x34)
+ SAVE_BAT(6, 0x38)
+ SAVE_BAT(7, 0x3c)
+
+ SAVE_4SR(0, 0x40)
+ SAVE_4SR(4, 0x44)
+ SAVE_4SR(8, 0x48)
+ SAVE_4SR(12, 0x4c)
+
+ SAVE_SPRN(SPRG0, 0x50)
+ SAVE_SPRN(SPRG1, 0x51)
+ SAVE_SPRN(SPRG2, 0x52)
+ SAVE_SPRN(SPRG3, 0x53)
+ SAVE_SPRN(SPRG4, 0x54)
+ SAVE_SPRN(SPRG5, 0x55)
+ SAVE_SPRN(SPRG6, 0x56)
+ SAVE_SPRN(SPRG7, 0x57)
+
+ SAVE_SPRN(IABR, 0x58)
+ SAVE_SPRN(DABR, 0x59)
+ SAVE_SPRN(TBRL, 0x5a)
+ SAVE_SPRN(TBRU, 0x5b)
+
+ blr
+
+
+/* restore registers */
+#define LOAD_BAT(n, addr) \
+ LOAD_SPRN(DBAT##n##L, addr); \
+ LOAD_SPRN(DBAT##n##U, addr+1); \
+ LOAD_SPRN(IBAT##n##L, addr+2); \
+ LOAD_SPRN(IBAT##n##U, addr+3);
+
+#define LOAD_SR(n, addr) \
+ lwz r10, ((addr)*4)(r4); \
+ mtsr n, r10;
+
+#define LOAD_4SR(n, addr) \
+ LOAD_SR(n, addr); \
+ LOAD_SR(n+1, addr+1); \
+ LOAD_SR(n+2, addr+2); \
+ LOAD_SR(n+3, addr+3);
+
+restore_regs:
+ lis r4, registers at h
+ ori r4, r4, registers at l
+
+ /* MMU is not up yet */
+ subis r4, r4, CONFIG_KERNEL_START at h
+
+ lwz r0, 0(r4)
+ lwz r1, 0x4(r4)
+ lwz r2, 0x8(r4)
+ lmw r11, 0xc(r4)
+
+ /*
+ * these are a bit tricky
+ *
+ * 0x18 - HID0
+ * 0x19 - HID1
+ * 0x1a - HID2
+ * 0x1b - MSR
+ * 0x1c - LR
+ * 0x1d - reserved by 0xf0 (BDI2000)
+ */
+ LOAD_SPRN(RPA, 0x1e);
+ LOAD_SPRN(SDR1, 0x1f);
+
+ /* restore MMU regs */
+ LOAD_BAT(0, 0x20)
+ LOAD_BAT(1, 0x24)
+ LOAD_BAT(2, 0x28)
+ LOAD_BAT(3, 0x2c)
+ LOAD_BAT(4, 0x30)
+ LOAD_BAT(5, 0x34)
+ LOAD_BAT(6, 0x38)
+ LOAD_BAT(7, 0x3c)
+
+ LOAD_4SR(0, 0x40)
+ LOAD_4SR(4, 0x44)
+ LOAD_4SR(8, 0x48)
+ LOAD_4SR(12, 0x4c)
+
+ /* rest of regs */
+ LOAD_SPRN(SPRG0, 0x50);
+ LOAD_SPRN(SPRG1, 0x51);
+ LOAD_SPRN(SPRG2, 0x52);
+ LOAD_SPRN(SPRG3, 0x53);
+ LOAD_SPRN(SPRG4, 0x54);
+ LOAD_SPRN(SPRG5, 0x55);
+ LOAD_SPRN(SPRG6, 0x56);
+ LOAD_SPRN(SPRG7, 0x57);
+
+ LOAD_SPRN(IABR, 0x58);
+ LOAD_SPRN(DABR, 0x59);
+ LOAD_SPRN(TBWL, 0x5a); /* these two have separate R/W regs */
+ LOAD_SPRN(TBWU, 0x5b);
+
+ blr
+
+
+
+/* cache flushing code. copied from arch/ppc/boot/util.S */
+#define NUM_CACHE_LINES (128*8)
+
+/*
+ * Flush data cache
+ * Do this by just reading lots of stuff into the cache.
+ */
+ .globl flush_data_cache
+flush_data_cache:
+ lis r3,CONFIG_KERNEL_START at h
+ ori r3,r3,CONFIG_KERNEL_START at l
+ li r4,NUM_CACHE_LINES
+ mtctr r4
+1:
+ lwz r4,0(r3)
+ addi r3,r3,L1_CACHE_BYTES /* Next line, please */
+ bdnz 1b
+ blr
diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h
index c4631f6..1a3dbb7 100644
--- a/include/asm-powerpc/mpc52xx.h
+++ b/include/asm-powerpc/mpc52xx.h
@@ -262,6 +262,16 @@ struct mpc52xx_suspend {
extern struct mpc52xx_suspend mpc52xx_suspend;
extern int __init mpc52xx_pm_init(void);
extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level);
+
+#ifdef CONFIG_PPC_LITE5200
+extern int __init lite5200_pm_init(void);
+
+/* lite5200 calls mpc5200 suspend functions, so here they are */
+extern int mpc52xx_pm_prepare(suspend_state_t);
+extern int mpc52xx_pm_enter(suspend_state_t);
+extern int mpc52xx_pm_finish(suspend_state_t);
+extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */
+#endif
#endif /* CONFIG_PM */
#endif /* __ASM_POWERPC_MPC52xx_H__ */
--
1.5.0.1
More information about the Linuxppc-dev
mailing list