[patch 02/14] Rename 4xx paths to 40x
Josh Boyer
jwboyer at linux.vnet.ibm.com
Wed Jul 18 04:15:49 EST 2007
4xx is a bit of a misnomer for certain things, as they really apply to PowerPC
40x only. Rename some of the files to clean this up.
Signed-off-by: Josh Boyer <jwboyer at linux.vnet.ibm.com>
---
arch/powerpc/Makefile | 2
arch/powerpc/kernel/Makefile | 2
arch/powerpc/kernel/head_40x.S | 1021 ++++++++++++++++++++++++++++++++++++
arch/powerpc/kernel/head_4xx.S | 1021 ------------------------------------
arch/powerpc/mm/40x_mmu.c | 135 ++++
arch/powerpc/mm/4xx_mmu.c | 135 ----
arch/powerpc/mm/Makefile | 2
arch/powerpc/platforms/40x/Kconfig | 208 +++++++
arch/powerpc/platforms/40x/Makefile | 1
arch/powerpc/platforms/4xx/Kconfig | 208 -------
arch/powerpc/platforms/4xx/Makefile | 1
11 files changed, 1368 insertions(+), 1368 deletions(-)
--- linux-2.6.orig/arch/powerpc/Makefile
+++ linux-2.6/arch/powerpc/Makefile
@@ -123,7 +123,7 @@ CFLAGS += $(cpu-as-y)
head-y := arch/powerpc/kernel/head_32.o
head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o
head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o
-head-$(CONFIG_4xx) := arch/powerpc/kernel/head_4xx.o
+head-$(CONFIG_40x) := arch/powerpc/kernel/head_40x.o
head-$(CONFIG_44x) := arch/powerpc/kernel/head_44x.o
head-$(CONFIG_FSL_BOOKE) := arch/powerpc/kernel/head_fsl_booke.o
--- linux-2.6.orig/arch/powerpc/kernel/Makefile
+++ linux-2.6/arch/powerpc/kernel/Makefile
@@ -46,7 +46,7 @@ ifeq ($(CONFIG_PPC_MERGE),y)
extra-$(CONFIG_PPC_STD_MMU) := head_32.o
extra-$(CONFIG_PPC64) := head_64.o
-extra-$(CONFIG_40x) := head_4xx.o
+extra-$(CONFIG_40x) := head_40x.o
extra-$(CONFIG_44x) := head_44x.o
extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
extra-$(CONFIG_8xx) := head_8xx.o
--- /dev/null
+++ linux-2.6/arch/powerpc/kernel/head_40x.S
@@ -0,0 +1,1021 @@
+/*
+ * Copyright (c) 1995-1996 Gary Thomas <gdt at linuxppc.org>
+ * Initial PowerPC version.
+ * Copyright (c) 1996 Cort Dougan <cort at cs.nmt.edu>
+ * Rewritten for PReP
+ * Copyright (c) 1996 Paul Mackerras <paulus at cs.anu.edu.au>
+ * Low-level exception handers, MMU support, and rewrite.
+ * Copyright (c) 1997 Dan Malek <dmalek at jlc.net>
+ * PowerPC 8xx modifications.
+ * Copyright (c) 1998-1999 TiVo, Inc.
+ * PowerPC 403GCX modifications.
+ * Copyright (c) 1999 Grant Erickson <grant at lcse.umn.edu>
+ * PowerPC 403GCX/405GP modifications.
+ * Copyright 2000 MontaVista Software Inc.
+ * PPC405 modifications
+ * PowerPC 403GCX/405GP modifications.
+ * Author: MontaVista Software, Inc.
+ * frank_rowand at mvista.com or source at mvista.com
+ * debbie_chu at mvista.com
+ *
+ *
+ * Module name: head_4xx.S
+ *
+ * Description:
+ * Kernel execution entry point code.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/ibm4xx.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+/* As with the other PowerPC ports, it is expected that when code
+ * execution begins here, the following registers contain valid, yet
+ * optional, information:
+ *
+ * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
+ * r4 - Starting address of the init RAM disk
+ * r5 - Ending address of the init RAM disk
+ * r6 - Start of kernel command line string (e.g. "mem=96m")
+ * r7 - End of kernel command line string
+ *
+ * This is all going to change RSN when we add bi_recs....... -- Dan
+ */
+ .text
+_GLOBAL(_stext)
+_GLOBAL(_start)
+
+ /* Save parameters we are passed.
+ */
+ mr r31,r3
+ mr r30,r4
+ mr r29,r5
+ mr r28,r6
+ mr r27,r7
+
+ /* We have to turn on the MMU right away so we get cache modes
+ * set correctly.
+ */
+ bl initial_mmu
+
+/* We now have the lower 16 Meg mapped into TLB entries, and the caches
+ * ready to work.
+ */
+turn_on_mmu:
+ lis r0,MSR_KERNEL at h
+ ori r0,r0,MSR_KERNEL at l
+ mtspr SPRN_SRR1,r0
+ lis r0,start_here at h
+ ori r0,r0,start_here at l
+ mtspr SPRN_SRR0,r0
+ SYNC
+ rfi /* enables MMU */
+ b . /* prevent prefetch past rfi */
+
+/*
+ * This area is used for temporarily saving registers during the
+ * critical exception prolog.
+ */
+ . = 0xc0
+crit_save:
+_GLOBAL(crit_r10)
+ .space 4
+_GLOBAL(crit_r11)
+ .space 4
+
+/*
+ * Exception vector entry code. This code runs with address translation
+ * turned off (i.e. using physical addresses). We assume SPRG3 has the
+ * physical address of the current task thread_struct.
+ * Note that we have to have decremented r1 before we write to any fields
+ * of the exception frame, since a critical interrupt could occur at any
+ * time, and it will write to the area immediately below the current r1.
+ */
+#define NORMAL_EXCEPTION_PROLOG \
+ mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
+ mtspr SPRN_SPRG1,r11; \
+ mtspr SPRN_SPRG2,r1; \
+ mfcr r10; /* save CR in r10 for now */\
+ mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
+ andi. r11,r11,MSR_PR; \
+ beq 1f; \
+ mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\
+ lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
+ addi r1,r1,THREAD_SIZE; \
+1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
+ tophys(r11,r1); \
+ stw r10,_CCR(r11); /* save various registers */\
+ stw r12,GPR12(r11); \
+ stw r9,GPR9(r11); \
+ mfspr r10,SPRN_SPRG0; \
+ stw r10,GPR10(r11); \
+ mfspr r12,SPRN_SPRG1; \
+ stw r12,GPR11(r11); \
+ mflr r10; \
+ stw r10,_LINK(r11); \
+ mfspr r10,SPRN_SPRG2; \
+ mfspr r12,SPRN_SRR0; \
+ stw r10,GPR1(r11); \
+ mfspr r9,SPRN_SRR1; \
+ stw r10,0(r11); \
+ rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
+ stw r0,GPR0(r11); \
+ SAVE_4GPRS(3, r11); \
+ SAVE_2GPRS(7, r11)
+
+/*
+ * Exception prolog for critical exceptions. This is a little different
+ * from the normal exception prolog above since a critical exception
+ * can potentially occur at any point during normal exception processing.
+ * Thus we cannot use the same SPRG registers as the normal prolog above.
+ * Instead we use a couple of words of memory at low physical addresses.
+ * This is OK since we don't support SMP on these processors.
+ */
+#define CRITICAL_EXCEPTION_PROLOG \
+ stw r10,crit_r10 at l(0); /* save two registers to work with */\
+ stw r11,crit_r11 at l(0); \
+ mfcr r10; /* save CR in r10 for now */\
+ mfspr r11,SPRN_SRR3; /* check whether user or kernel */\
+ andi. r11,r11,MSR_PR; \
+ lis r11,critical_stack_top at h; \
+ ori r11,r11,critical_stack_top at l; \
+ beq 1f; \
+ /* COMING FROM USER MODE */ \
+ mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\
+ lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
+ addi r11,r11,THREAD_SIZE; \
+1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\
+ tophys(r11,r11); \
+ stw r10,_CCR(r11); /* save various registers */\
+ stw r12,GPR12(r11); \
+ stw r9,GPR9(r11); \
+ mflr r10; \
+ stw r10,_LINK(r11); \
+ mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
+ stw r12,_DEAR(r11); /* since they may have had stuff */\
+ mfspr r9,SPRN_ESR; /* in them at the point where the */\
+ stw r9,_ESR(r11); /* exception was taken */\
+ mfspr r12,SPRN_SRR2; \
+ stw r1,GPR1(r11); \
+ mfspr r9,SPRN_SRR3; \
+ stw r1,0(r11); \
+ tovirt(r1,r11); \
+ rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
+ stw r0,GPR0(r11); \
+ SAVE_4GPRS(3, r11); \
+ SAVE_2GPRS(7, r11)
+
+ /*
+ * State at this point:
+ * r9 saved in stack frame, now saved SRR3 & ~MSR_WE
+ * r10 saved in crit_r10 and in stack frame, trashed
+ * r11 saved in crit_r11 and in stack frame,
+ * now phys stack/exception frame pointer
+ * r12 saved in stack frame, now saved SRR2
+ * CR saved in stack frame, CR0.EQ = !SRR3.PR
+ * LR, DEAR, ESR in stack frame
+ * r1 saved in stack frame, now virt stack/excframe pointer
+ * r0, r3-r8 saved in stack frame
+ */
+
+/*
+ * Exception vectors.
+ */
+#define START_EXCEPTION(n, label) \
+ . = n; \
+label:
+
+#define EXCEPTION(n, label, hdlr, xfer) \
+ START_EXCEPTION(n, label); \
+ NORMAL_EXCEPTION_PROLOG; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ xfer(n, hdlr)
+
+#define CRITICAL_EXCEPTION(n, label, hdlr) \
+ START_EXCEPTION(n, label); \
+ CRITICAL_EXCEPTION_PROLOG; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+ NOCOPY, crit_transfer_to_handler, \
+ ret_from_crit_exc)
+
+#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \
+ li r10,trap; \
+ stw r10,_TRAP(r11); \
+ lis r10,msr at h; \
+ ori r10,r10,msr at l; \
+ copyee(r10, r9); \
+ bl tfer; \
+ .long hdlr; \
+ .long ret
+
+#define COPY_EE(d, s) rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
+ ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
+ ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
+ ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
+ ret_from_except)
+
+
+/*
+ * 0x0100 - Critical Interrupt Exception
+ */
+ CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception)
+
+/*
+ * 0x0200 - Machine Check Exception
+ */
+ CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
+
+/*
+ * 0x0300 - Data Storage Exception
+ * This happens for just a few reasons. U0 set (but we don't do that),
+ * or zone protection fault (user violation, write to protected page).
+ * If this is just an update of modified status, we do that quickly
+ * and exit. Otherwise, we call heavywight functions to do the work.
+ */
+ START_EXCEPTION(0x0300, DataStorage)
+ mtspr SPRN_SPRG0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG1, r11
+#ifdef CONFIG_403GCX
+ stw r12, 0(r0)
+ stw r9, 4(r0)
+ mfcr r11
+ mfspr r12, SPRN_PID
+ stw r11, 8(r0)
+ stw r12, 12(r0)
+#else
+ mtspr SPRN_SPRG4, r12
+ mtspr SPRN_SPRG5, r9
+ mfcr r11
+ mfspr r12, SPRN_PID
+ mtspr SPRN_SPRG7, r11
+ mtspr SPRN_SPRG6, r12
+#endif
+
+ /* First, check if it was a zone fault (which means a user
+ * tried to access a kernel or read-protected page - always
+ * a SEGV). All other faults here must be stores, so no
+ * need to check ESR_DST as well. */
+ mfspr r10, SPRN_ESR
+ andis. r10, r10, ESR_DIZ at h
+ bne 2f
+
+ mfspr r10, SPRN_DEAR /* Get faulting address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ lis r11, TASK_SIZE at h
+ cmplw r10, r11
+ blt+ 3f
+ lis r11, swapper_pg_dir at h
+ ori r11, r11, swapper_pg_dir at l
+ li r9, 0
+ mtspr SPRN_PID, r9 /* TLB will have 0 TID */
+ b 4f
+
+ /* Get the PGD for the current thread.
+ */
+3:
+ mfspr r11,SPRN_SPRG3
+ lwz r11,PGDIR(r11)
+4:
+ tophys(r11, r11)
+ rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
+ lwz r11, 0(r11) /* Get L1 entry */
+ rlwinm. r12, r11, 0, 0, 19 /* Extract L2 (pte) base address */
+ beq 2f /* Bail if no table */
+
+ rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
+ lwz r11, 0(r12) /* Get Linux PTE */
+
+ andi. r9, r11, _PAGE_RW /* Is it writeable? */
+ beq 2f /* Bail if not */
+
+ /* Update 'changed'.
+ */
+ ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+ stw r11, 0(r12) /* Update Linux page table */
+
+ /* Most of the Linux PTE is ready to load into the TLB LO.
+ * We set ZSEL, where only the LS-bit determines user access.
+ * We set execute, because we don't have the granularity to
+ * properly set this at the page level (Linux problem).
+ * If shared is set, we cause a zero PID->TID load.
+ * Many of these bits are software only. Bits we don't set
+ * here we (properly should) assume have the appropriate value.
+ */
+ li r12, 0x0ce2
+ andc r11, r11, r12 /* Make sure 20, 21 are zero */
+
+ /* find the TLB index that caused the fault. It has to be here.
+ */
+ tlbsx r9, 0, r10
+
+ tlbwe r11, r9, TLB_DATA /* Load TLB LO */
+
+ /* Done...restore registers and get out of here.
+ */
+#ifdef CONFIG_403GCX
+ lwz r12, 12(r0)
+ lwz r11, 8(r0)
+ mtspr SPRN_PID, r12
+ mtcr r11
+ lwz r9, 4(r0)
+ lwz r12, 0(r0)
+#else
+ mfspr r12, SPRN_SPRG6
+ mfspr r11, SPRN_SPRG7
+ mtspr SPRN_PID, r12
+ mtcr r11
+ mfspr r9, SPRN_SPRG5
+ mfspr r12, SPRN_SPRG4
+#endif
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ PPC405_ERR77_SYNC
+ rfi /* Should sync shadow TLBs */
+ b . /* prevent prefetch past rfi */
+
+2:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+#ifdef CONFIG_403GCX
+ lwz r12, 12(r0)
+ lwz r11, 8(r0)
+ mtspr SPRN_PID, r12
+ mtcr r11
+ lwz r9, 4(r0)
+ lwz r12, 0(r0)
+#else
+ mfspr r12, SPRN_SPRG6
+ mfspr r11, SPRN_SPRG7
+ mtspr SPRN_PID, r12
+ mtcr r11
+ mfspr r9, SPRN_SPRG5
+ mfspr r12, SPRN_SPRG4
+#endif
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ b DataAccess
+
+/*
+ * 0x0400 - Instruction Storage Exception
+ * This is caused by a fetch from non-execute or guarded pages.
+ */
+ START_EXCEPTION(0x0400, InstructionAccess)
+ NORMAL_EXCEPTION_PROLOG
+ mr r4,r12 /* Pass SRR0 as arg2 */
+ li r5,0 /* Pass zero as arg3 */
+ EXC_XFER_EE_LITE(0x400, handle_page_fault)
+
+/* 0x0500 - External Interrupt Exception */
+ EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
+
+/* 0x0600 - Alignment Exception */
+ START_EXCEPTION(0x0600, Alignment)
+ NORMAL_EXCEPTION_PROLOG
+ mfspr r4,SPRN_DEAR /* Grab the DEAR and save it */
+ stw r4,_DEAR(r11)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_EE(0x600, alignment_exception)
+
+/* 0x0700 - Program Exception */
+ START_EXCEPTION(0x0700, ProgramCheck)
+ NORMAL_EXCEPTION_PROLOG
+ mfspr r4,SPRN_ESR /* Grab the ESR and save it */
+ stw r4,_ESR(r11)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_STD(0x700, program_check_exception)
+
+ EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_EE)
+
+/* 0x0C00 - System Call Exception */
+ START_EXCEPTION(0x0C00, SystemCall)
+ NORMAL_EXCEPTION_PROLOG
+ EXC_XFER_EE_LITE(0xc00, DoSyscall)
+
+ EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_EE)
+
+/* 0x1000 - Programmable Interval Timer (PIT) Exception */
+ START_EXCEPTION(0x1000, Decrementer)
+ NORMAL_EXCEPTION_PROLOG
+ lis r0,TSR_PIS at h
+ mtspr SPRN_TSR,r0 /* Clear the PIT exception */
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_LITE(0x1000, timer_interrupt)
+
+#if 0
+/* NOTE:
+ * FIT and WDT handlers are not implemented yet.
+ */
+
+/* 0x1010 - Fixed Interval Timer (FIT) Exception
+*/
+ STND_EXCEPTION(0x1010, FITException, unknown_exception)
+
+/* 0x1020 - Watchdog Timer (WDT) Exception
+*/
+#ifdef CONFIG_BOOKE_WDT
+ CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException)
+#else
+ CRITICAL_EXCEPTION(0x1020, WDTException, unknown_exception)
+#endif
+#endif
+
+/* 0x1100 - Data TLB Miss Exception
+ * As the name implies, translation is not in the MMU, so search the
+ * page tables and fix it. The only purpose of this function is to
+ * load TLB entries from the page table if they exist.
+ */
+ START_EXCEPTION(0x1100, DTLBMiss)
+ mtspr SPRN_SPRG0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG1, r11
+#ifdef CONFIG_403GCX
+ stw r12, 0(r0)
+ stw r9, 4(r0)
+ mfcr r11
+ mfspr r12, SPRN_PID
+ stw r11, 8(r0)
+ stw r12, 12(r0)
+#else
+ mtspr SPRN_SPRG4, r12
+ mtspr SPRN_SPRG5, r9
+ mfcr r11
+ mfspr r12, SPRN_PID
+ mtspr SPRN_SPRG7, r11
+ mtspr SPRN_SPRG6, r12
+#endif
+ mfspr r10, SPRN_DEAR /* Get faulting address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ lis r11, TASK_SIZE at h
+ cmplw r10, r11
+ blt+ 3f
+ lis r11, swapper_pg_dir at h
+ ori r11, r11, swapper_pg_dir at l
+ li r9, 0
+ mtspr SPRN_PID, r9 /* TLB will have 0 TID */
+ b 4f
+
+ /* Get the PGD for the current thread.
+ */
+3:
+ mfspr r11,SPRN_SPRG3
+ lwz r11,PGDIR(r11)
+4:
+ tophys(r11, r11)
+ rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
+ lwz r12, 0(r11) /* Get L1 entry */
+ andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
+ beq 2f /* Bail if no table */
+
+ rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
+ lwz r11, 0(r12) /* Get Linux PTE */
+ andi. r9, r11, _PAGE_PRESENT
+ beq 5f
+
+ ori r11, r11, _PAGE_ACCESSED
+ stw r11, 0(r12)
+
+ /* Create TLB tag. This is the faulting address plus a static
+ * set of bits. These are size, valid, E, U0.
+ */
+ li r12, 0x00c0
+ rlwimi r10, r12, 0, 20, 31
+
+ b finish_tlb_load
+
+2: /* Check for possible large-page pmd entry */
+ rlwinm. r9, r12, 2, 22, 24
+ beq 5f
+
+ /* Create TLB tag. This is the faulting address, plus a static
+ * set of bits (valid, E, U0) plus the size from the PMD.
+ */
+ ori r9, r9, 0x40
+ rlwimi r10, r9, 0, 20, 31
+ mr r11, r12
+
+ b finish_tlb_load
+
+5:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+#ifdef CONFIG_403GCX
+ lwz r12, 12(r0)
+ lwz r11, 8(r0)
+ mtspr SPRN_PID, r12
+ mtcr r11
+ lwz r9, 4(r0)
+ lwz r12, 0(r0)
+#else
+ mfspr r12, SPRN_SPRG6
+ mfspr r11, SPRN_SPRG7
+ mtspr SPRN_PID, r12
+ mtcr r11
+ mfspr r9, SPRN_SPRG5
+ mfspr r12, SPRN_SPRG4
+#endif
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ b DataAccess
+
+/* 0x1200 - Instruction TLB Miss Exception
+ * Nearly the same as above, except we get our information from different
+ * registers and bailout to a different point.
+ */
+ START_EXCEPTION(0x1200, ITLBMiss)
+ mtspr SPRN_SPRG0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG1, r11
+#ifdef CONFIG_403GCX
+ stw r12, 0(r0)
+ stw r9, 4(r0)
+ mfcr r11
+ mfspr r12, SPRN_PID
+ stw r11, 8(r0)
+ stw r12, 12(r0)
+#else
+ mtspr SPRN_SPRG4, r12
+ mtspr SPRN_SPRG5, r9
+ mfcr r11
+ mfspr r12, SPRN_PID
+ mtspr SPRN_SPRG7, r11
+ mtspr SPRN_SPRG6, r12
+#endif
+ mfspr r10, SPRN_SRR0 /* Get faulting address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ lis r11, TASK_SIZE at h
+ cmplw r10, r11
+ blt+ 3f
+ lis r11, swapper_pg_dir at h
+ ori r11, r11, swapper_pg_dir at l
+ li r9, 0
+ mtspr SPRN_PID, r9 /* TLB will have 0 TID */
+ b 4f
+
+ /* Get the PGD for the current thread.
+ */
+3:
+ mfspr r11,SPRN_SPRG3
+ lwz r11,PGDIR(r11)
+4:
+ tophys(r11, r11)
+ rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
+ lwz r12, 0(r11) /* Get L1 entry */
+ andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
+ beq 2f /* Bail if no table */
+
+ rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
+ lwz r11, 0(r12) /* Get Linux PTE */
+ andi. r9, r11, _PAGE_PRESENT
+ beq 5f
+
+ ori r11, r11, _PAGE_ACCESSED
+ stw r11, 0(r12)
+
+ /* Create TLB tag. This is the faulting address plus a static
+ * set of bits. These are size, valid, E, U0.
+ */
+ li r12, 0x00c0
+ rlwimi r10, r12, 0, 20, 31
+
+ b finish_tlb_load
+
+2: /* Check for possible large-page pmd entry */
+ rlwinm. r9, r12, 2, 22, 24
+ beq 5f
+
+ /* Create TLB tag. This is the faulting address, plus a static
+ * set of bits (valid, E, U0) plus the size from the PMD.
+ */
+ ori r9, r9, 0x40
+ rlwimi r10, r9, 0, 20, 31
+ mr r11, r12
+
+ b finish_tlb_load
+
+5:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+#ifdef CONFIG_403GCX
+ lwz r12, 12(r0)
+ lwz r11, 8(r0)
+ mtspr SPRN_PID, r12
+ mtcr r11
+ lwz r9, 4(r0)
+ lwz r12, 0(r0)
+#else
+ mfspr r12, SPRN_SPRG6
+ mfspr r11, SPRN_SPRG7
+ mtspr SPRN_PID, r12
+ mtcr r11
+ mfspr r9, SPRN_SPRG5
+ mfspr r12, SPRN_SPRG4
+#endif
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ b InstructionAccess
+
+ EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
+#ifdef CONFIG_IBM405_ERR51
+ /* 405GP errata 51 */
+ START_EXCEPTION(0x1700, Trap_17)
+ b DTLBMiss
+#else
+ EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
+#endif
+ EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_EE)
+
+/* Check for a single step debug exception while in an exception
+ * handler before state has been saved. This is to catch the case
+ * where an instruction that we are trying to single step causes
+ * an exception (eg ITLB/DTLB miss) and thus the first instruction of
+ * the exception handler generates a single step debug exception.
+ *
+ * If we get a debug trap on the first instruction of an exception handler,
+ * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
+ * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
+ * The exception handler was handling a non-critical interrupt, so it will
+ * save (and later restore) the MSR via SPRN_SRR1, which will still have
+ * the MSR_DE bit set.
+ */
+ /* 0x2000 - Debug Exception */
+ START_EXCEPTION(0x2000, DebugTrap)
+ CRITICAL_EXCEPTION_PROLOG
+
+ /*
+ * If this is a single step or branch-taken exception in an
+ * exception entry sequence, it was probably meant to apply to
+ * the code where the exception occurred (since exception entry
+ * doesn't turn off DE automatically). We simulate the effect
+ * of turning off DE on entry to an exception handler by turning
+ * off DE in the SRR3 value and clearing the debug status.
+ */
+ mfspr r10,SPRN_DBSR /* check single-step/branch taken */
+ andis. r10,r10,DBSR_IC at h
+ beq+ 2f
+
+ andi. r10,r9,MSR_IR|MSR_PR /* check supervisor + MMU off */
+ beq 1f /* branch and fix it up */
+
+ mfspr r10,SPRN_SRR2 /* Faulting instruction address */
+ cmplwi r10,0x2100
+ bgt+ 2f /* address above exception vectors */
+
+ /* here it looks like we got an inappropriate debug exception. */
+1: rlwinm r9,r9,0,~MSR_DE /* clear DE in the SRR3 value */
+ lis r10,DBSR_IC at h /* clear the IC event */
+ mtspr SPRN_DBSR,r10
+ /* restore state and get out */
+ lwz r10,_CCR(r11)
+ lwz r0,GPR0(r11)
+ lwz r1,GPR1(r11)
+ mtcrf 0x80,r10
+ mtspr SPRN_SRR2,r12
+ mtspr SPRN_SRR3,r9
+ lwz r9,GPR9(r11)
+ lwz r12,GPR12(r11)
+ lwz r10,crit_r10 at l(0)
+ lwz r11,crit_r11 at l(0)
+ PPC405_ERR77_SYNC
+ rfci
+ b .
+
+ /* continue normal handling for a critical exception... */
+2: mfspr r4,SPRN_DBSR
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(DebugException, 0x2002, \
+ (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+ NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
+
+/*
+ * The other Data TLB exceptions bail out to this point
+ * if they can't resolve the lightweight TLB fault.
+ */
+DataAccess:
+ NORMAL_EXCEPTION_PROLOG
+ mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
+ stw r5,_ESR(r11)
+ mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
+ EXC_XFER_EE_LITE(0x300, handle_page_fault)
+
+/* Other PowerPC processors, namely those derived from the 6xx-series
+ * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
+ * However, for the 4xx-series processors these are neither defined nor
+ * reserved.
+ */
+
+ /* Damn, I came up one instruction too many to fit into the
+ * exception space :-). Both the instruction and data TLB
+ * miss get to this point to load the TLB.
+ * r10 - TLB_TAG value
+ * r11 - Linux PTE
+ * r12, r9 - avilable to use
+ * PID - loaded with proper value when we get here
+ * Upon exit, we reload everything and RFI.
+ * Actually, it will fit now, but oh well.....a common place
+ * to load the TLB.
+ */
+tlb_4xx_index:
+ .long 0
+finish_tlb_load:
+ /* load the next available TLB index.
+ */
+ lwz r9, tlb_4xx_index at l(0)
+ addi r9, r9, 1
+ andi. r9, r9, (PPC4XX_TLB_SIZE-1)
+ stw r9, tlb_4xx_index at l(0)
+
+6:
+ /*
+ * Clear out the software-only bits in the PTE to generate the
+ * TLB_DATA value. These are the bottom 2 bits of the RPM, the
+ * top 3 bits of the zone field, and M.
+ */
+ li r12, 0x0ce2
+ andc r11, r11, r12
+
+ tlbwe r11, r9, TLB_DATA /* Load TLB LO */
+ tlbwe r10, r9, TLB_TAG /* Load TLB HI */
+
+ /* Done...restore registers and get out of here.
+ */
+#ifdef CONFIG_403GCX
+ lwz r12, 12(r0)
+ lwz r11, 8(r0)
+ mtspr SPRN_PID, r12
+ mtcr r11
+ lwz r9, 4(r0)
+ lwz r12, 0(r0)
+#else
+ mfspr r12, SPRN_SPRG6
+ mfspr r11, SPRN_SPRG7
+ mtspr SPRN_PID, r12
+ mtcr r11
+ mfspr r9, SPRN_SPRG5
+ mfspr r12, SPRN_SPRG4
+#endif
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ PPC405_ERR77_SYNC
+ rfi /* Should sync shadow TLBs */
+ b . /* prevent prefetch past rfi */
+
+/* extern void giveup_fpu(struct task_struct *prev)
+ *
+ * The PowerPC 4xx family of processors do not have an FPU, so this just
+ * returns.
+ */
+_GLOBAL(giveup_fpu)
+ blr
+
+/* This is where the main kernel code starts.
+ */
+start_here:
+
+ /* ptr to current */
+ lis r2,init_task at h
+ ori r2,r2,init_task at l
+
+ /* ptr to phys current thread */
+ tophys(r4,r2)
+ addi r4,r4,THREAD /* init task's THREAD */
+ mtspr SPRN_SPRG3,r4
+
+ /* stack */
+ lis r1,init_thread_union at ha
+ addi r1,r1,init_thread_union at l
+ li r0,0
+ stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+
+ bl early_init /* We have to do this with MMU on */
+
+/*
+ * Decide what sort of machine this is and initialize the MMU.
+ */
+ mr r3,r31
+ mr r4,r30
+ mr r5,r29
+ mr r6,r28
+ mr r7,r27
+ bl machine_init
+ bl MMU_init
+
+/* Go back to running unmapped so we can load up new values
+ * and change to using our exception vectors.
+ * On the 4xx, all we have to do is invalidate the TLB to clear
+ * the old 16M byte TLB mappings.
+ */
+ lis r4,2f at h
+ ori r4,r4,2f at l
+ tophys(r4,r4)
+ lis r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
+ ori r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
+ mtspr SPRN_SRR0,r4
+ mtspr SPRN_SRR1,r3
+ rfi
+ b . /* prevent prefetch past rfi */
+
+/* Load up the kernel context */
+2:
+ sync /* Flush to memory before changing TLB */
+ tlbia
+ isync /* Flush shadow TLBs */
+
+ /* set up the PTE pointers for the Abatron bdiGDB.
+ */
+ lis r6, swapper_pg_dir at h
+ ori r6, r6, swapper_pg_dir at l
+ lis r5, abatron_pteptrs at h
+ ori r5, r5, abatron_pteptrs at l
+ stw r5, 0xf0(r0) /* Must match your Abatron config file */
+ tophys(r5,r5)
+ stw r6, 0(r5)
+
+/* Now turn on the MMU for real! */
+ lis r4,MSR_KERNEL at h
+ ori r4,r4,MSR_KERNEL at l
+ lis r3,start_kernel at h
+ ori r3,r3,start_kernel at l
+ mtspr SPRN_SRR0,r3
+ mtspr SPRN_SRR1,r4
+ rfi /* enable MMU and jump to start_kernel */
+ b . /* prevent prefetch past rfi */
+
+/* Set up the initial MMU state so we can do the first level of
+ * kernel initialization. This maps the first 16 MBytes of memory 1:1
+ * virtual to physical and more importantly sets the cache mode.
+ */
+initial_mmu:
+ tlbia /* Invalidate all TLB entries */
+ isync
+
+ /* We should still be executing code at physical address 0x0000xxxx
+ * at this point. However, start_here is at virtual address
+ * 0xC000xxxx. So, set up a TLB mapping to cover this once
+ * translation is enabled.
+ */
+
+ lis r3,KERNELBASE at h /* Load the kernel virtual address */
+ ori r3,r3,KERNELBASE at l
+ tophys(r4,r3) /* Load the kernel physical address */
+
+ iccci r0,r3 /* Invalidate the i-cache before use */
+
+ /* Load the kernel PID.
+ */
+ li r0,0
+ mtspr SPRN_PID,r0
+ sync
+
+ /* Configure and load two entries into TLB slots 62 and 63.
+ * In case we are pinning TLBs, these are reserved in by the
+ * other TLB functions. If not reserving, then it doesn't
+ * matter where they are loaded.
+ */
+ clrrwi r4,r4,10 /* Mask off the real page number */
+ ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */
+
+ clrrwi r3,r3,10 /* Mask off the effective page number */
+ ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
+
+ li r0,63 /* TLB slot 63 */
+
+ tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */
+ tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(SERIAL_DEBUG_IO_BASE)
+
+ /* Load a TLB entry for the UART, so that ppc4xx_progress() can use
+ * the UARTs nice and early. We use a 4k real==virtual mapping. */
+
+ lis r3,SERIAL_DEBUG_IO_BASE at h
+ ori r3,r3,SERIAL_DEBUG_IO_BASE at l
+ mr r4,r3
+ clrrwi r4,r4,12
+ ori r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
+
+ clrrwi r3,r3,12
+ ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+ li r0,0 /* TLB slot 0 */
+ tlbwe r4,r0,TLB_DATA
+ tlbwe r3,r0,TLB_TAG
+#endif /* CONFIG_SERIAL_DEBUG_TEXT && SERIAL_DEBUG_IO_BASE */
+
+ isync
+
+ /* Establish the exception vector base
+ */
+ lis r4,KERNELBASE at h /* EVPR only uses the high 16-bits */
+ tophys(r0,r4) /* Use the physical address */
+ mtspr SPRN_EVPR,r0
+
+ blr
+
+_GLOBAL(abort)
+ mfspr r13,SPRN_DBCR0
+ oris r13,r13,DBCR0_RST_SYSTEM at h
+ mtspr SPRN_DBCR0,r13
+
+_GLOBAL(set_context)
+
+#ifdef CONFIG_BDI_SWITCH
+ /* Context switch the PTE pointer for the Abatron BDI2000.
+ * The PGDIR is the second parameter.
+ */
+ lis r5, KERNELBASE at h
+ lwz r5, 0xf0(r5)
+ stw r4, 0x4(r5)
+#endif
+ sync
+ mtspr SPRN_PID,r3
+ isync /* Need an isync to flush shadow */
+ /* TLBs after changing PID */
+ blr
+
+/* We put a few things here that have to be page-aligned. This stuff
+ * goes at the beginning of the data segment, which is page-aligned.
+ */
+ .data
+ .align 12
+ .globl sdata
+sdata:
+ .globl empty_zero_page
+empty_zero_page:
+ .space 4096
+ .globl swapper_pg_dir
+swapper_pg_dir:
+ .space 4096
+
+
+/* Stack for handling critical exceptions from kernel mode */
+ .section .bss
+ .align 12
+exception_stack_bottom:
+ .space 4096
+critical_stack_top:
+ .globl exception_stack_top
+exception_stack_top:
+
+/* This space gets a copy of optional info passed to us by the bootstrap
+ * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+ .globl cmd_line
+cmd_line:
+ .space 512
+
+/* Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+abatron_pteptrs:
+ .space 8
--- linux-2.6.orig/arch/powerpc/kernel/head_4xx.S
+++ /dev/null
@@ -1,1021 +0,0 @@
-/*
- * Copyright (c) 1995-1996 Gary Thomas <gdt at linuxppc.org>
- * Initial PowerPC version.
- * Copyright (c) 1996 Cort Dougan <cort at cs.nmt.edu>
- * Rewritten for PReP
- * Copyright (c) 1996 Paul Mackerras <paulus at cs.anu.edu.au>
- * Low-level exception handers, MMU support, and rewrite.
- * Copyright (c) 1997 Dan Malek <dmalek at jlc.net>
- * PowerPC 8xx modifications.
- * Copyright (c) 1998-1999 TiVo, Inc.
- * PowerPC 403GCX modifications.
- * Copyright (c) 1999 Grant Erickson <grant at lcse.umn.edu>
- * PowerPC 403GCX/405GP modifications.
- * Copyright 2000 MontaVista Software Inc.
- * PPC405 modifications
- * PowerPC 403GCX/405GP modifications.
- * Author: MontaVista Software, Inc.
- * frank_rowand at mvista.com or source at mvista.com
- * debbie_chu at mvista.com
- *
- *
- * Module name: head_4xx.S
- *
- * Description:
- * Kernel execution entry point code.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/ibm4xx.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-/* As with the other PowerPC ports, it is expected that when code
- * execution begins here, the following registers contain valid, yet
- * optional, information:
- *
- * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
- * r4 - Starting address of the init RAM disk
- * r5 - Ending address of the init RAM disk
- * r6 - Start of kernel command line string (e.g. "mem=96m")
- * r7 - End of kernel command line string
- *
- * This is all going to change RSN when we add bi_recs....... -- Dan
- */
- .text
-_GLOBAL(_stext)
-_GLOBAL(_start)
-
- /* Save parameters we are passed.
- */
- mr r31,r3
- mr r30,r4
- mr r29,r5
- mr r28,r6
- mr r27,r7
-
- /* We have to turn on the MMU right away so we get cache modes
- * set correctly.
- */
- bl initial_mmu
-
-/* We now have the lower 16 Meg mapped into TLB entries, and the caches
- * ready to work.
- */
-turn_on_mmu:
- lis r0,MSR_KERNEL at h
- ori r0,r0,MSR_KERNEL at l
- mtspr SPRN_SRR1,r0
- lis r0,start_here at h
- ori r0,r0,start_here at l
- mtspr SPRN_SRR0,r0
- SYNC
- rfi /* enables MMU */
- b . /* prevent prefetch past rfi */
-
-/*
- * This area is used for temporarily saving registers during the
- * critical exception prolog.
- */
- . = 0xc0
-crit_save:
-_GLOBAL(crit_r10)
- .space 4
-_GLOBAL(crit_r11)
- .space 4
-
-/*
- * Exception vector entry code. This code runs with address translation
- * turned off (i.e. using physical addresses). We assume SPRG3 has the
- * physical address of the current task thread_struct.
- * Note that we have to have decremented r1 before we write to any fields
- * of the exception frame, since a critical interrupt could occur at any
- * time, and it will write to the area immediately below the current r1.
- */
-#define NORMAL_EXCEPTION_PROLOG \
- mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
- mtspr SPRN_SPRG1,r11; \
- mtspr SPRN_SPRG2,r1; \
- mfcr r10; /* save CR in r10 for now */\
- mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
- andi. r11,r11,MSR_PR; \
- beq 1f; \
- mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\
- lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
- addi r1,r1,THREAD_SIZE; \
-1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
- tophys(r11,r1); \
- stw r10,_CCR(r11); /* save various registers */\
- stw r12,GPR12(r11); \
- stw r9,GPR9(r11); \
- mfspr r10,SPRN_SPRG0; \
- stw r10,GPR10(r11); \
- mfspr r12,SPRN_SPRG1; \
- stw r12,GPR11(r11); \
- mflr r10; \
- stw r10,_LINK(r11); \
- mfspr r10,SPRN_SPRG2; \
- mfspr r12,SPRN_SRR0; \
- stw r10,GPR1(r11); \
- mfspr r9,SPRN_SRR1; \
- stw r10,0(r11); \
- rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
- stw r0,GPR0(r11); \
- SAVE_4GPRS(3, r11); \
- SAVE_2GPRS(7, r11)
-
-/*
- * Exception prolog for critical exceptions. This is a little different
- * from the normal exception prolog above since a critical exception
- * can potentially occur at any point during normal exception processing.
- * Thus we cannot use the same SPRG registers as the normal prolog above.
- * Instead we use a couple of words of memory at low physical addresses.
- * This is OK since we don't support SMP on these processors.
- */
-#define CRITICAL_EXCEPTION_PROLOG \
- stw r10,crit_r10 at l(0); /* save two registers to work with */\
- stw r11,crit_r11 at l(0); \
- mfcr r10; /* save CR in r10 for now */\
- mfspr r11,SPRN_SRR3; /* check whether user or kernel */\
- andi. r11,r11,MSR_PR; \
- lis r11,critical_stack_top at h; \
- ori r11,r11,critical_stack_top at l; \
- beq 1f; \
- /* COMING FROM USER MODE */ \
- mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\
- lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
- addi r11,r11,THREAD_SIZE; \
-1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\
- tophys(r11,r11); \
- stw r10,_CCR(r11); /* save various registers */\
- stw r12,GPR12(r11); \
- stw r9,GPR9(r11); \
- mflr r10; \
- stw r10,_LINK(r11); \
- mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
- stw r12,_DEAR(r11); /* since they may have had stuff */\
- mfspr r9,SPRN_ESR; /* in them at the point where the */\
- stw r9,_ESR(r11); /* exception was taken */\
- mfspr r12,SPRN_SRR2; \
- stw r1,GPR1(r11); \
- mfspr r9,SPRN_SRR3; \
- stw r1,0(r11); \
- tovirt(r1,r11); \
- rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
- stw r0,GPR0(r11); \
- SAVE_4GPRS(3, r11); \
- SAVE_2GPRS(7, r11)
-
- /*
- * State at this point:
- * r9 saved in stack frame, now saved SRR3 & ~MSR_WE
- * r10 saved in crit_r10 and in stack frame, trashed
- * r11 saved in crit_r11 and in stack frame,
- * now phys stack/exception frame pointer
- * r12 saved in stack frame, now saved SRR2
- * CR saved in stack frame, CR0.EQ = !SRR3.PR
- * LR, DEAR, ESR in stack frame
- * r1 saved in stack frame, now virt stack/excframe pointer
- * r0, r3-r8 saved in stack frame
- */
-
-/*
- * Exception vectors.
- */
-#define START_EXCEPTION(n, label) \
- . = n; \
-label:
-
-#define EXCEPTION(n, label, hdlr, xfer) \
- START_EXCEPTION(n, label); \
- NORMAL_EXCEPTION_PROLOG; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- xfer(n, hdlr)
-
-#define CRITICAL_EXCEPTION(n, label, hdlr) \
- START_EXCEPTION(n, label); \
- CRITICAL_EXCEPTION_PROLOG; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
- NOCOPY, crit_transfer_to_handler, \
- ret_from_crit_exc)
-
-#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \
- li r10,trap; \
- stw r10,_TRAP(r11); \
- lis r10,msr at h; \
- ori r10,r10,msr at l; \
- copyee(r10, r9); \
- bl tfer; \
- .long hdlr; \
- .long ret
-
-#define COPY_EE(d, s) rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
- ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
- ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
- ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
- ret_from_except)
-
-
-/*
- * 0x0100 - Critical Interrupt Exception
- */
- CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception)
-
-/*
- * 0x0200 - Machine Check Exception
- */
- CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-
-/*
- * 0x0300 - Data Storage Exception
- * This happens for just a few reasons. U0 set (but we don't do that),
- * or zone protection fault (user violation, write to protected page).
- * If this is just an update of modified status, we do that quickly
- * and exit. Otherwise, we call heavywight functions to do the work.
- */
- START_EXCEPTION(0x0300, DataStorage)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
-#ifdef CONFIG_403GCX
- stw r12, 0(r0)
- stw r9, 4(r0)
- mfcr r11
- mfspr r12, SPRN_PID
- stw r11, 8(r0)
- stw r12, 12(r0)
-#else
- mtspr SPRN_SPRG4, r12
- mtspr SPRN_SPRG5, r9
- mfcr r11
- mfspr r12, SPRN_PID
- mtspr SPRN_SPRG7, r11
- mtspr SPRN_SPRG6, r12
-#endif
-
- /* First, check if it was a zone fault (which means a user
- * tried to access a kernel or read-protected page - always
- * a SEGV). All other faults here must be stores, so no
- * need to check ESR_DST as well. */
- mfspr r10, SPRN_ESR
- andis. r10, r10, ESR_DIZ at h
- bne 2f
-
- mfspr r10, SPRN_DEAR /* Get faulting address */
-
- /* If we are faulting a kernel address, we have to use the
- * kernel page tables.
- */
- lis r11, TASK_SIZE at h
- cmplw r10, r11
- blt+ 3f
- lis r11, swapper_pg_dir at h
- ori r11, r11, swapper_pg_dir at l
- li r9, 0
- mtspr SPRN_PID, r9 /* TLB will have 0 TID */
- b 4f
-
- /* Get the PGD for the current thread.
- */
-3:
- mfspr r11,SPRN_SPRG3
- lwz r11,PGDIR(r11)
-4:
- tophys(r11, r11)
- rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
- lwz r11, 0(r11) /* Get L1 entry */
- rlwinm. r12, r11, 0, 0, 19 /* Extract L2 (pte) base address */
- beq 2f /* Bail if no table */
-
- rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
- lwz r11, 0(r12) /* Get Linux PTE */
-
- andi. r9, r11, _PAGE_RW /* Is it writeable? */
- beq 2f /* Bail if not */
-
- /* Update 'changed'.
- */
- ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
- stw r11, 0(r12) /* Update Linux page table */
-
- /* Most of the Linux PTE is ready to load into the TLB LO.
- * We set ZSEL, where only the LS-bit determines user access.
- * We set execute, because we don't have the granularity to
- * properly set this at the page level (Linux problem).
- * If shared is set, we cause a zero PID->TID load.
- * Many of these bits are software only. Bits we don't set
- * here we (properly should) assume have the appropriate value.
- */
- li r12, 0x0ce2
- andc r11, r11, r12 /* Make sure 20, 21 are zero */
-
- /* find the TLB index that caused the fault. It has to be here.
- */
- tlbsx r9, 0, r10
-
- tlbwe r11, r9, TLB_DATA /* Load TLB LO */
-
- /* Done...restore registers and get out of here.
- */
-#ifdef CONFIG_403GCX
- lwz r12, 12(r0)
- lwz r11, 8(r0)
- mtspr SPRN_PID, r12
- mtcr r11
- lwz r9, 4(r0)
- lwz r12, 0(r0)
-#else
- mfspr r12, SPRN_SPRG6
- mfspr r11, SPRN_SPRG7
- mtspr SPRN_PID, r12
- mtcr r11
- mfspr r9, SPRN_SPRG5
- mfspr r12, SPRN_SPRG4
-#endif
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
- PPC405_ERR77_SYNC
- rfi /* Should sync shadow TLBs */
- b . /* prevent prefetch past rfi */
-
-2:
- /* The bailout. Restore registers to pre-exception conditions
- * and call the heavyweights to help us out.
- */
-#ifdef CONFIG_403GCX
- lwz r12, 12(r0)
- lwz r11, 8(r0)
- mtspr SPRN_PID, r12
- mtcr r11
- lwz r9, 4(r0)
- lwz r12, 0(r0)
-#else
- mfspr r12, SPRN_SPRG6
- mfspr r11, SPRN_SPRG7
- mtspr SPRN_PID, r12
- mtcr r11
- mfspr r9, SPRN_SPRG5
- mfspr r12, SPRN_SPRG4
-#endif
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
- b DataAccess
-
-/*
- * 0x0400 - Instruction Storage Exception
- * This is caused by a fetch from non-execute or guarded pages.
- */
- START_EXCEPTION(0x0400, InstructionAccess)
- NORMAL_EXCEPTION_PROLOG
- mr r4,r12 /* Pass SRR0 as arg2 */
- li r5,0 /* Pass zero as arg3 */
- EXC_XFER_EE_LITE(0x400, handle_page_fault)
-
-/* 0x0500 - External Interrupt Exception */
- EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
-
-/* 0x0600 - Alignment Exception */
- START_EXCEPTION(0x0600, Alignment)
- NORMAL_EXCEPTION_PROLOG
- mfspr r4,SPRN_DEAR /* Grab the DEAR and save it */
- stw r4,_DEAR(r11)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_EE(0x600, alignment_exception)
-
-/* 0x0700 - Program Exception */
- START_EXCEPTION(0x0700, ProgramCheck)
- NORMAL_EXCEPTION_PROLOG
- mfspr r4,SPRN_ESR /* Grab the ESR and save it */
- stw r4,_ESR(r11)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_STD(0x700, program_check_exception)
-
- EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_EE)
-
-/* 0x0C00 - System Call Exception */
- START_EXCEPTION(0x0C00, SystemCall)
- NORMAL_EXCEPTION_PROLOG
- EXC_XFER_EE_LITE(0xc00, DoSyscall)
-
- EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_EE)
-
-/* 0x1000 - Programmable Interval Timer (PIT) Exception */
- START_EXCEPTION(0x1000, Decrementer)
- NORMAL_EXCEPTION_PROLOG
- lis r0,TSR_PIS at h
- mtspr SPRN_TSR,r0 /* Clear the PIT exception */
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_LITE(0x1000, timer_interrupt)
-
-#if 0
-/* NOTE:
- * FIT and WDT handlers are not implemented yet.
- */
-
-/* 0x1010 - Fixed Interval Timer (FIT) Exception
-*/
- STND_EXCEPTION(0x1010, FITException, unknown_exception)
-
-/* 0x1020 - Watchdog Timer (WDT) Exception
-*/
-#ifdef CONFIG_BOOKE_WDT
- CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException)
-#else
- CRITICAL_EXCEPTION(0x1020, WDTException, unknown_exception)
-#endif
-#endif
-
-/* 0x1100 - Data TLB Miss Exception
- * As the name implies, translation is not in the MMU, so search the
- * page tables and fix it. The only purpose of this function is to
- * load TLB entries from the page table if they exist.
- */
- START_EXCEPTION(0x1100, DTLBMiss)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
-#ifdef CONFIG_403GCX
- stw r12, 0(r0)
- stw r9, 4(r0)
- mfcr r11
- mfspr r12, SPRN_PID
- stw r11, 8(r0)
- stw r12, 12(r0)
-#else
- mtspr SPRN_SPRG4, r12
- mtspr SPRN_SPRG5, r9
- mfcr r11
- mfspr r12, SPRN_PID
- mtspr SPRN_SPRG7, r11
- mtspr SPRN_SPRG6, r12
-#endif
- mfspr r10, SPRN_DEAR /* Get faulting address */
-
- /* If we are faulting a kernel address, we have to use the
- * kernel page tables.
- */
- lis r11, TASK_SIZE at h
- cmplw r10, r11
- blt+ 3f
- lis r11, swapper_pg_dir at h
- ori r11, r11, swapper_pg_dir at l
- li r9, 0
- mtspr SPRN_PID, r9 /* TLB will have 0 TID */
- b 4f
-
- /* Get the PGD for the current thread.
- */
-3:
- mfspr r11,SPRN_SPRG3
- lwz r11,PGDIR(r11)
-4:
- tophys(r11, r11)
- rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
- lwz r12, 0(r11) /* Get L1 entry */
- andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
- beq 2f /* Bail if no table */
-
- rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
- lwz r11, 0(r12) /* Get Linux PTE */
- andi. r9, r11, _PAGE_PRESENT
- beq 5f
-
- ori r11, r11, _PAGE_ACCESSED
- stw r11, 0(r12)
-
- /* Create TLB tag. This is the faulting address plus a static
- * set of bits. These are size, valid, E, U0.
- */
- li r12, 0x00c0
- rlwimi r10, r12, 0, 20, 31
-
- b finish_tlb_load
-
-2: /* Check for possible large-page pmd entry */
- rlwinm. r9, r12, 2, 22, 24
- beq 5f
-
- /* Create TLB tag. This is the faulting address, plus a static
- * set of bits (valid, E, U0) plus the size from the PMD.
- */
- ori r9, r9, 0x40
- rlwimi r10, r9, 0, 20, 31
- mr r11, r12
-
- b finish_tlb_load
-
-5:
- /* The bailout. Restore registers to pre-exception conditions
- * and call the heavyweights to help us out.
- */
-#ifdef CONFIG_403GCX
- lwz r12, 12(r0)
- lwz r11, 8(r0)
- mtspr SPRN_PID, r12
- mtcr r11
- lwz r9, 4(r0)
- lwz r12, 0(r0)
-#else
- mfspr r12, SPRN_SPRG6
- mfspr r11, SPRN_SPRG7
- mtspr SPRN_PID, r12
- mtcr r11
- mfspr r9, SPRN_SPRG5
- mfspr r12, SPRN_SPRG4
-#endif
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
- b DataAccess
-
-/* 0x1200 - Instruction TLB Miss Exception
- * Nearly the same as above, except we get our information from different
- * registers and bailout to a different point.
- */
- START_EXCEPTION(0x1200, ITLBMiss)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
-#ifdef CONFIG_403GCX
- stw r12, 0(r0)
- stw r9, 4(r0)
- mfcr r11
- mfspr r12, SPRN_PID
- stw r11, 8(r0)
- stw r12, 12(r0)
-#else
- mtspr SPRN_SPRG4, r12
- mtspr SPRN_SPRG5, r9
- mfcr r11
- mfspr r12, SPRN_PID
- mtspr SPRN_SPRG7, r11
- mtspr SPRN_SPRG6, r12
-#endif
- mfspr r10, SPRN_SRR0 /* Get faulting address */
-
- /* If we are faulting a kernel address, we have to use the
- * kernel page tables.
- */
- lis r11, TASK_SIZE at h
- cmplw r10, r11
- blt+ 3f
- lis r11, swapper_pg_dir at h
- ori r11, r11, swapper_pg_dir at l
- li r9, 0
- mtspr SPRN_PID, r9 /* TLB will have 0 TID */
- b 4f
-
- /* Get the PGD for the current thread.
- */
-3:
- mfspr r11,SPRN_SPRG3
- lwz r11,PGDIR(r11)
-4:
- tophys(r11, r11)
- rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
- lwz r12, 0(r11) /* Get L1 entry */
- andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
- beq 2f /* Bail if no table */
-
- rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
- lwz r11, 0(r12) /* Get Linux PTE */
- andi. r9, r11, _PAGE_PRESENT
- beq 5f
-
- ori r11, r11, _PAGE_ACCESSED
- stw r11, 0(r12)
-
- /* Create TLB tag. This is the faulting address plus a static
- * set of bits. These are size, valid, E, U0.
- */
- li r12, 0x00c0
- rlwimi r10, r12, 0, 20, 31
-
- b finish_tlb_load
-
-2: /* Check for possible large-page pmd entry */
- rlwinm. r9, r12, 2, 22, 24
- beq 5f
-
- /* Create TLB tag. This is the faulting address, plus a static
- * set of bits (valid, E, U0) plus the size from the PMD.
- */
- ori r9, r9, 0x40
- rlwimi r10, r9, 0, 20, 31
- mr r11, r12
-
- b finish_tlb_load
-
-5:
- /* The bailout. Restore registers to pre-exception conditions
- * and call the heavyweights to help us out.
- */
-#ifdef CONFIG_403GCX
- lwz r12, 12(r0)
- lwz r11, 8(r0)
- mtspr SPRN_PID, r12
- mtcr r11
- lwz r9, 4(r0)
- lwz r12, 0(r0)
-#else
- mfspr r12, SPRN_SPRG6
- mfspr r11, SPRN_SPRG7
- mtspr SPRN_PID, r12
- mtcr r11
- mfspr r9, SPRN_SPRG5
- mfspr r12, SPRN_SPRG4
-#endif
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
- b InstructionAccess
-
- EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
-#ifdef CONFIG_IBM405_ERR51
- /* 405GP errata 51 */
- START_EXCEPTION(0x1700, Trap_17)
- b DTLBMiss
-#else
- EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
-#endif
- EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_EE)
- EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_EE)
-
-/* Check for a single step debug exception while in an exception
- * handler before state has been saved. This is to catch the case
- * where an instruction that we are trying to single step causes
- * an exception (eg ITLB/DTLB miss) and thus the first instruction of
- * the exception handler generates a single step debug exception.
- *
- * If we get a debug trap on the first instruction of an exception handler,
- * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
- * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
- * The exception handler was handling a non-critical interrupt, so it will
- * save (and later restore) the MSR via SPRN_SRR1, which will still have
- * the MSR_DE bit set.
- */
- /* 0x2000 - Debug Exception */
- START_EXCEPTION(0x2000, DebugTrap)
- CRITICAL_EXCEPTION_PROLOG
-
- /*
- * If this is a single step or branch-taken exception in an
- * exception entry sequence, it was probably meant to apply to
- * the code where the exception occurred (since exception entry
- * doesn't turn off DE automatically). We simulate the effect
- * of turning off DE on entry to an exception handler by turning
- * off DE in the SRR3 value and clearing the debug status.
- */
- mfspr r10,SPRN_DBSR /* check single-step/branch taken */
- andis. r10,r10,DBSR_IC at h
- beq+ 2f
-
- andi. r10,r9,MSR_IR|MSR_PR /* check supervisor + MMU off */
- beq 1f /* branch and fix it up */
-
- mfspr r10,SPRN_SRR2 /* Faulting instruction address */
- cmplwi r10,0x2100
- bgt+ 2f /* address above exception vectors */
-
- /* here it looks like we got an inappropriate debug exception. */
-1: rlwinm r9,r9,0,~MSR_DE /* clear DE in the SRR3 value */
- lis r10,DBSR_IC at h /* clear the IC event */
- mtspr SPRN_DBSR,r10
- /* restore state and get out */
- lwz r10,_CCR(r11)
- lwz r0,GPR0(r11)
- lwz r1,GPR1(r11)
- mtcrf 0x80,r10
- mtspr SPRN_SRR2,r12
- mtspr SPRN_SRR3,r9
- lwz r9,GPR9(r11)
- lwz r12,GPR12(r11)
- lwz r10,crit_r10 at l(0)
- lwz r11,crit_r11 at l(0)
- PPC405_ERR77_SYNC
- rfci
- b .
-
- /* continue normal handling for a critical exception... */
-2: mfspr r4,SPRN_DBSR
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(DebugException, 0x2002, \
- (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
- NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
-
-/*
- * The other Data TLB exceptions bail out to this point
- * if they can't resolve the lightweight TLB fault.
- */
-DataAccess:
- NORMAL_EXCEPTION_PROLOG
- mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
- stw r5,_ESR(r11)
- mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
- EXC_XFER_EE_LITE(0x300, handle_page_fault)
-
-/* Other PowerPC processors, namely those derived from the 6xx-series
- * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
- * However, for the 4xx-series processors these are neither defined nor
- * reserved.
- */
-
- /* Damn, I came up one instruction too many to fit into the
- * exception space :-). Both the instruction and data TLB
- * miss get to this point to load the TLB.
- * r10 - TLB_TAG value
- * r11 - Linux PTE
- * r12, r9 - avilable to use
- * PID - loaded with proper value when we get here
- * Upon exit, we reload everything and RFI.
- * Actually, it will fit now, but oh well.....a common place
- * to load the TLB.
- */
-tlb_4xx_index:
- .long 0
-finish_tlb_load:
- /* load the next available TLB index.
- */
- lwz r9, tlb_4xx_index at l(0)
- addi r9, r9, 1
- andi. r9, r9, (PPC4XX_TLB_SIZE-1)
- stw r9, tlb_4xx_index at l(0)
-
-6:
- /*
- * Clear out the software-only bits in the PTE to generate the
- * TLB_DATA value. These are the bottom 2 bits of the RPM, the
- * top 3 bits of the zone field, and M.
- */
- li r12, 0x0ce2
- andc r11, r11, r12
-
- tlbwe r11, r9, TLB_DATA /* Load TLB LO */
- tlbwe r10, r9, TLB_TAG /* Load TLB HI */
-
- /* Done...restore registers and get out of here.
- */
-#ifdef CONFIG_403GCX
- lwz r12, 12(r0)
- lwz r11, 8(r0)
- mtspr SPRN_PID, r12
- mtcr r11
- lwz r9, 4(r0)
- lwz r12, 0(r0)
-#else
- mfspr r12, SPRN_SPRG6
- mfspr r11, SPRN_SPRG7
- mtspr SPRN_PID, r12
- mtcr r11
- mfspr r9, SPRN_SPRG5
- mfspr r12, SPRN_SPRG4
-#endif
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
- PPC405_ERR77_SYNC
- rfi /* Should sync shadow TLBs */
- b . /* prevent prefetch past rfi */
-
-/* extern void giveup_fpu(struct task_struct *prev)
- *
- * The PowerPC 4xx family of processors do not have an FPU, so this just
- * returns.
- */
-_GLOBAL(giveup_fpu)
- blr
-
-/* This is where the main kernel code starts.
- */
-start_here:
-
- /* ptr to current */
- lis r2,init_task at h
- ori r2,r2,init_task at l
-
- /* ptr to phys current thread */
- tophys(r4,r2)
- addi r4,r4,THREAD /* init task's THREAD */
- mtspr SPRN_SPRG3,r4
-
- /* stack */
- lis r1,init_thread_union at ha
- addi r1,r1,init_thread_union at l
- li r0,0
- stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-
- bl early_init /* We have to do this with MMU on */
-
-/*
- * Decide what sort of machine this is and initialize the MMU.
- */
- mr r3,r31
- mr r4,r30
- mr r5,r29
- mr r6,r28
- mr r7,r27
- bl machine_init
- bl MMU_init
-
-/* Go back to running unmapped so we can load up new values
- * and change to using our exception vectors.
- * On the 4xx, all we have to do is invalidate the TLB to clear
- * the old 16M byte TLB mappings.
- */
- lis r4,2f at h
- ori r4,r4,2f at l
- tophys(r4,r4)
- lis r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
- ori r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
- mtspr SPRN_SRR0,r4
- mtspr SPRN_SRR1,r3
- rfi
- b . /* prevent prefetch past rfi */
-
-/* Load up the kernel context */
-2:
- sync /* Flush to memory before changing TLB */
- tlbia
- isync /* Flush shadow TLBs */
-
- /* set up the PTE pointers for the Abatron bdiGDB.
- */
- lis r6, swapper_pg_dir at h
- ori r6, r6, swapper_pg_dir at l
- lis r5, abatron_pteptrs at h
- ori r5, r5, abatron_pteptrs at l
- stw r5, 0xf0(r0) /* Must match your Abatron config file */
- tophys(r5,r5)
- stw r6, 0(r5)
-
-/* Now turn on the MMU for real! */
- lis r4,MSR_KERNEL at h
- ori r4,r4,MSR_KERNEL at l
- lis r3,start_kernel at h
- ori r3,r3,start_kernel at l
- mtspr SPRN_SRR0,r3
- mtspr SPRN_SRR1,r4
- rfi /* enable MMU and jump to start_kernel */
- b . /* prevent prefetch past rfi */
-
-/* Set up the initial MMU state so we can do the first level of
- * kernel initialization. This maps the first 16 MBytes of memory 1:1
- * virtual to physical and more importantly sets the cache mode.
- */
-initial_mmu:
- tlbia /* Invalidate all TLB entries */
- isync
-
- /* We should still be executing code at physical address 0x0000xxxx
- * at this point. However, start_here is at virtual address
- * 0xC000xxxx. So, set up a TLB mapping to cover this once
- * translation is enabled.
- */
-
- lis r3,KERNELBASE at h /* Load the kernel virtual address */
- ori r3,r3,KERNELBASE at l
- tophys(r4,r3) /* Load the kernel physical address */
-
- iccci r0,r3 /* Invalidate the i-cache before use */
-
- /* Load the kernel PID.
- */
- li r0,0
- mtspr SPRN_PID,r0
- sync
-
- /* Configure and load two entries into TLB slots 62 and 63.
- * In case we are pinning TLBs, these are reserved in by the
- * other TLB functions. If not reserving, then it doesn't
- * matter where they are loaded.
- */
- clrrwi r4,r4,10 /* Mask off the real page number */
- ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */
-
- clrrwi r3,r3,10 /* Mask off the effective page number */
- ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
-
- li r0,63 /* TLB slot 63 */
-
- tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */
- tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(SERIAL_DEBUG_IO_BASE)
-
- /* Load a TLB entry for the UART, so that ppc4xx_progress() can use
- * the UARTs nice and early. We use a 4k real==virtual mapping. */
-
- lis r3,SERIAL_DEBUG_IO_BASE at h
- ori r3,r3,SERIAL_DEBUG_IO_BASE at l
- mr r4,r3
- clrrwi r4,r4,12
- ori r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
-
- clrrwi r3,r3,12
- ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
-
- li r0,0 /* TLB slot 0 */
- tlbwe r4,r0,TLB_DATA
- tlbwe r3,r0,TLB_TAG
-#endif /* CONFIG_SERIAL_DEBUG_TEXT && SERIAL_DEBUG_IO_BASE */
-
- isync
-
- /* Establish the exception vector base
- */
- lis r4,KERNELBASE at h /* EVPR only uses the high 16-bits */
- tophys(r0,r4) /* Use the physical address */
- mtspr SPRN_EVPR,r0
-
- blr
-
-_GLOBAL(abort)
- mfspr r13,SPRN_DBCR0
- oris r13,r13,DBCR0_RST_SYSTEM at h
- mtspr SPRN_DBCR0,r13
-
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
- /* Context switch the PTE pointer for the Abatron BDI2000.
- * The PGDIR is the second parameter.
- */
- lis r5, KERNELBASE at h
- lwz r5, 0xf0(r5)
- stw r4, 0x4(r5)
-#endif
- sync
- mtspr SPRN_PID,r3
- isync /* Need an isync to flush shadow */
- /* TLBs after changing PID */
- blr
-
-/* We put a few things here that have to be page-aligned. This stuff
- * goes at the beginning of the data segment, which is page-aligned.
- */
- .data
- .align 12
- .globl sdata
-sdata:
- .globl empty_zero_page
-empty_zero_page:
- .space 4096
- .globl swapper_pg_dir
-swapper_pg_dir:
- .space 4096
-
-
-/* Stack for handling critical exceptions from kernel mode */
- .section .bss
- .align 12
-exception_stack_bottom:
- .space 4096
-critical_stack_top:
- .globl exception_stack_top
-exception_stack_top:
-
-/* This space gets a copy of optional info passed to us by the bootstrap
- * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
- .globl cmd_line
-cmd_line:
- .space 512
-
-/* Room for two PTE pointers, usually the kernel and current user pointers
- * to their respective root page table.
- */
-abatron_pteptrs:
- .space 8
--- /dev/null
+++ linux-2.6/arch/powerpc/mm/40x_mmu.c
@@ -0,0 +1,135 @@
+/*
+ * This file contains the routines for initializing the MMU
+ * on the 4xx series of chips.
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt at linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus at cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort at cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+#include <asm/bootx.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+#include "mmu_decl.h"
+
+extern int __map_without_ltlbs;
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
+{
+ /*
+ * The Zone Protection Register (ZPR) defines how protection will
+ * be applied to every page which is a member of a given zone. At
+ * present, we utilize only two of the 4xx's zones.
+ * The zone index bits (of ZSEL) in the PTE are used for software
+ * indicators, except the LSB. For user access, zone 1 is used,
+ * for kernel access, zone 0 is used. We set all but zone 1
+ * to zero, allowing only kernel access as indicated in the PTE.
+ * For zone 1, we set a 01 binary (a value of 10 will not work)
+ * to allow user access as indicated in the PTE. This also allows
+ * kernel access as indicated in the PTE.
+ */
+
+ mtspr(SPRN_ZPR, 0x10000000);
+
+ flush_instruction_cache();
+
+ /*
+ * Set up the real-mode cache parameters for the exception vector
+ * handlers (which are run in real-mode).
+ */
+
+ mtspr(SPRN_DCWR, 0x00000000); /* All caching is write-back */
+
+ /*
+ * Cache instruction and data space where the exception
+ * vectors and the kernel live in real-mode.
+ */
+
+ mtspr(SPRN_DCCR, 0xF0000000); /* 512 MB of data space at 0x0. */
+ mtspr(SPRN_ICCR, 0xF0000000); /* 512 MB of instr. space at 0x0. */
+}
+
+#define LARGE_PAGE_SIZE_16M (1<<24)
+#define LARGE_PAGE_SIZE_4M (1<<22)
+
+unsigned long __init mmu_mapin_ram(void)
+{
+ unsigned long v, s;
+ phys_addr_t p;
+
+ v = KERNELBASE;
+ p = PPC_MEMSTART;
+ s = 0;
+
+ if (__map_without_ltlbs) {
+ return s;
+ }
+
+ while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) {
+ pmd_t *pmdp;
+ unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+
+ pmdp = pmd_offset(pgd_offset_k(v), v);
+ pmd_val(*pmdp++) = val;
+ pmd_val(*pmdp++) = val;
+ pmd_val(*pmdp++) = val;
+ pmd_val(*pmdp++) = val;
+
+ v += LARGE_PAGE_SIZE_16M;
+ p += LARGE_PAGE_SIZE_16M;
+ s += LARGE_PAGE_SIZE_16M;
+ }
+
+ while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) {
+ pmd_t *pmdp;
+ unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+
+ pmdp = pmd_offset(pgd_offset_k(v), v);
+ pmd_val(*pmdp) = val;
+
+ v += LARGE_PAGE_SIZE_4M;
+ p += LARGE_PAGE_SIZE_4M;
+ s += LARGE_PAGE_SIZE_4M;
+ }
+
+ return s;
+}
--- linux-2.6.orig/arch/powerpc/mm/4xx_mmu.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * This file contains the routines for initializing the MMU
- * on the 4xx series of chips.
- * -- paulus
- *
- * Derived from arch/ppc/mm/init.c:
- * Copyright (C) 1995-1996 Gary Thomas (gdt at linuxppc.org)
- *
- * Modifications by Paul Mackerras (PowerMac) (paulus at cs.anu.edu.au)
- * and Cort Dougan (PReP) (cort at cs.nmt.edu)
- * Copyright (C) 1996 Paul Mackerras
- *
- * Derived from "arch/i386/mm/init.c"
- * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-#include "mmu_decl.h"
-
-extern int __map_without_ltlbs;
-/*
- * MMU_init_hw does the chip-specific initialization of the MMU hardware.
- */
-void __init MMU_init_hw(void)
-{
- /*
- * The Zone Protection Register (ZPR) defines how protection will
- * be applied to every page which is a member of a given zone. At
- * present, we utilize only two of the 4xx's zones.
- * The zone index bits (of ZSEL) in the PTE are used for software
- * indicators, except the LSB. For user access, zone 1 is used,
- * for kernel access, zone 0 is used. We set all but zone 1
- * to zero, allowing only kernel access as indicated in the PTE.
- * For zone 1, we set a 01 binary (a value of 10 will not work)
- * to allow user access as indicated in the PTE. This also allows
- * kernel access as indicated in the PTE.
- */
-
- mtspr(SPRN_ZPR, 0x10000000);
-
- flush_instruction_cache();
-
- /*
- * Set up the real-mode cache parameters for the exception vector
- * handlers (which are run in real-mode).
- */
-
- mtspr(SPRN_DCWR, 0x00000000); /* All caching is write-back */
-
- /*
- * Cache instruction and data space where the exception
- * vectors and the kernel live in real-mode.
- */
-
- mtspr(SPRN_DCCR, 0xF0000000); /* 512 MB of data space at 0x0. */
- mtspr(SPRN_ICCR, 0xF0000000); /* 512 MB of instr. space at 0x0. */
-}
-
-#define LARGE_PAGE_SIZE_16M (1<<24)
-#define LARGE_PAGE_SIZE_4M (1<<22)
-
-unsigned long __init mmu_mapin_ram(void)
-{
- unsigned long v, s;
- phys_addr_t p;
-
- v = KERNELBASE;
- p = PPC_MEMSTART;
- s = 0;
-
- if (__map_without_ltlbs) {
- return s;
- }
-
- while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) {
- pmd_t *pmdp;
- unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
-
- pmdp = pmd_offset(pgd_offset_k(v), v);
- pmd_val(*pmdp++) = val;
- pmd_val(*pmdp++) = val;
- pmd_val(*pmdp++) = val;
- pmd_val(*pmdp++) = val;
-
- v += LARGE_PAGE_SIZE_16M;
- p += LARGE_PAGE_SIZE_16M;
- s += LARGE_PAGE_SIZE_16M;
- }
-
- while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) {
- pmd_t *pmdp;
- unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
-
- pmdp = pmd_offset(pgd_offset_k(v), v);
- pmd_val(*pmdp) = val;
-
- v += LARGE_PAGE_SIZE_4M;
- p += LARGE_PAGE_SIZE_4M;
- s += LARGE_PAGE_SIZE_4M;
- }
-
- return s;
-}
--- linux-2.6.orig/arch/powerpc/mm/Makefile
+++ linux-2.6/arch/powerpc/mm/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_PPC64) += init_64.o pgtabl
hash_utils_64.o hash_low_64.o tlb_64.o \
slb_low.o slb.o stab.o mmap.o $(hash-y)
obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o hash_low_32.o tlb_32.o
-obj-$(CONFIG_40x) += 4xx_mmu.o
+obj-$(CONFIG_40x) += 40x_mmu.o
obj-$(CONFIG_44x) += 44x_mmu.o
obj-$(CONFIG_FSL_BOOKE) += fsl_booke_mmu.o
obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o
--- /dev/null
+++ linux-2.6/arch/powerpc/platforms/40x/Kconfig
@@ -0,0 +1,208 @@
+config 4xx
+ bool
+ depends on 40x || 44x
+ default y
+
+config BOOKE
+ bool
+ depends on 44x
+ default y
+
+menu "AMCC 40x options"
+ depends on 40x
+
+#config BUBINGA
+# bool "Bubinga"
+# depends on 40x
+# default n
+# select 405EP
+# help
+# This option enables support for the IBM 405EP evaluation board.
+
+#config CPCI405
+# bool "CPCI405"
+# depends on 40x
+# default n
+# select 405GP
+# help
+# This option enables support for the CPCI405 board.
+
+#config EP405
+# bool "EP405/EP405PC"
+# depends on 40x
+# default n
+# select 405GP
+# help
+# This option enables support for the EP405/EP405PC boards.
+
+#config EP405PC
+# bool "EP405PC Support"
+# depends on EP405
+# default y
+# help
+# This option enables support for the extra features of the EP405PC board.
+
+#config REDWOOD_5
+# bool "Redwood-5"
+# depends on 40x
+# default n
+# select STB03xxx
+# help
+# This option enables support for the IBM STB04 evaluation board.
+
+#config REDWOOD_6
+# bool "Redwood-6"
+# depends on 40x
+# default n
+# select STB03xxx
+# help
+# This option enables support for the IBM STBx25xx evaluation board.
+
+#config SYCAMORE
+# bool "Sycamore"
+# depends on 40x
+# default n
+# select 405GPR
+# help
+# This option enables support for the IBM PPC405GPr evaluation board.
+
+#config WALNUT
+# bool "Walnut"
+# depends on 40x
+# default y
+# select 405GP
+# help
+# This option enables support for the IBM PPC405GP evaluation board.
+
+#config XILINX_ML300
+# bool "Xilinx-ML300"
+# depends on 40x
+# default y
+# select VIRTEX_II_PRO
+# help
+# This option enables support for the Xilinx ML300 evaluation board.
+
+endmenu
+
+# 40x specific CPU modules, selected based on the board above.
+config NP405H
+ bool
+ #depends on ASH
+
+# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
+config 403GCX
+ bool
+ #depends on OAK
+ select IBM405_ERR51
+
+config 405GP
+ bool
+ select IBM405_ERR77
+ select IBM405_ERR51
+
+config 405EP
+ bool
+
+config 405GPR
+ bool
+
+config VIRTEX_II_PRO
+ bool
+ select IBM405_ERR77
+ select IBM405_ERR51
+
+config STB03xxx
+ bool
+ select IBM405_ERR77
+ select IBM405_ERR51
+
+# 40x errata/workaround config symbols, selected by the CPU models above
+
+# All 405-based cores up until the 405GPR and 405EP have this errata.
+config IBM405_ERR77
+ bool
+
+# All 40x-based cores, up until the 405GPR and 405EP have this errata.
+config IBM405_ERR51
+ bool
+
+menu "AMCC 44x options"
+ depends on 44x
+
+#config BAMBOO
+# bool "Bamboo"
+# depends on 44x
+# default n
+# select 440EP
+# help
+# This option enables support for the IBM PPC440EP evaluation board.
+
+config EBONY
+ bool "Ebony"
+ depends on 44x
+ default y
+ select 440GP
+ help
+ This option enables support for the IBM PPC440GP evaluation board.
+
+#config LUAN
+# bool "Luan"
+# depends on 44x
+# default n
+# select 440SP
+# help
+# This option enables support for the IBM PPC440SP evaluation board.
+
+#config OCOTEA
+# bool "Ocotea"
+# depends on 44x
+# default n
+# select 440GX
+# help
+# This option enables support for the IBM PPC440GX evaluation board.
+
+endmenu
+
+# 44x specific CPU modules, selected based on the board above.
+config 440EP
+ bool
+ select PPC_FPU
+ select IBM440EP_ERR42
+
+config 440GP
+ bool
+ select IBM_NEW_EMAC_ZMII
+
+config 440GX
+ bool
+
+config 440SP
+ bool
+
+config 440A
+ bool
+ depends on 440GX
+ default y
+
+# 44x errata/workaround config symbols, selected by the CPU models above
+config IBM440EP_ERR42
+ bool
+
+#config XILINX_OCP
+# bool
+# depends on XILINX_ML300
+# default y
+
+#config BIOS_FIXUP
+# bool
+# depends on BUBINGA || EP405 || SYCAMORE || WALNUT
+# default y
+
+#config PPC4xx_DMA
+# bool "PPC4xx DMA controller support"
+# depends on 4xx
+
+#config PPC4xx_EDMA
+# bool
+# depends on !STB03xxx && PPC4xx_DMA
+# default y
--- /dev/null
+++ linux-2.6/arch/powerpc/platforms/40x/Makefile
@@ -0,0 +1 @@
+# empty makefile so make clean works
\ No newline at end of file
--- linux-2.6.orig/arch/powerpc/platforms/4xx/Kconfig
+++ /dev/null
@@ -1,208 +0,0 @@
-config 4xx
- bool
- depends on 40x || 44x
- default y
-
-config BOOKE
- bool
- depends on 44x
- default y
-
-menu "AMCC 40x options"
- depends on 40x
-
-#config BUBINGA
-# bool "Bubinga"
-# depends on 40x
-# default n
-# select 405EP
-# help
-# This option enables support for the IBM 405EP evaluation board.
-
-#config CPCI405
-# bool "CPCI405"
-# depends on 40x
-# default n
-# select 405GP
-# help
-# This option enables support for the CPCI405 board.
-
-#config EP405
-# bool "EP405/EP405PC"
-# depends on 40x
-# default n
-# select 405GP
-# help
-# This option enables support for the EP405/EP405PC boards.
-
-#config EP405PC
-# bool "EP405PC Support"
-# depends on EP405
-# default y
-# help
-# This option enables support for the extra features of the EP405PC board.
-
-#config REDWOOD_5
-# bool "Redwood-5"
-# depends on 40x
-# default n
-# select STB03xxx
-# help
-# This option enables support for the IBM STB04 evaluation board.
-
-#config REDWOOD_6
-# bool "Redwood-6"
-# depends on 40x
-# default n
-# select STB03xxx
-# help
-# This option enables support for the IBM STBx25xx evaluation board.
-
-#config SYCAMORE
-# bool "Sycamore"
-# depends on 40x
-# default n
-# select 405GPR
-# help
-# This option enables support for the IBM PPC405GPr evaluation board.
-
-#config WALNUT
-# bool "Walnut"
-# depends on 40x
-# default y
-# select 405GP
-# help
-# This option enables support for the IBM PPC405GP evaluation board.
-
-#config XILINX_ML300
-# bool "Xilinx-ML300"
-# depends on 40x
-# default y
-# select VIRTEX_II_PRO
-# help
-# This option enables support for the Xilinx ML300 evaluation board.
-
-endmenu
-
-# 40x specific CPU modules, selected based on the board above.
-config NP405H
- bool
- #depends on ASH
-
-# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
-config 403GCX
- bool
- #depends on OAK
- select IBM405_ERR51
-
-config 405GP
- bool
- select IBM405_ERR77
- select IBM405_ERR51
-
-config 405EP
- bool
-
-config 405GPR
- bool
-
-config VIRTEX_II_PRO
- bool
- select IBM405_ERR77
- select IBM405_ERR51
-
-config STB03xxx
- bool
- select IBM405_ERR77
- select IBM405_ERR51
-
-# 40x errata/workaround config symbols, selected by the CPU models above
-
-# All 405-based cores up until the 405GPR and 405EP have this errata.
-config IBM405_ERR77
- bool
-
-# All 40x-based cores, up until the 405GPR and 405EP have this errata.
-config IBM405_ERR51
- bool
-
-menu "AMCC 44x options"
- depends on 44x
-
-#config BAMBOO
-# bool "Bamboo"
-# depends on 44x
-# default n
-# select 440EP
-# help
-# This option enables support for the IBM PPC440EP evaluation board.
-
-config EBONY
- bool "Ebony"
- depends on 44x
- default y
- select 440GP
- help
- This option enables support for the IBM PPC440GP evaluation board.
-
-#config LUAN
-# bool "Luan"
-# depends on 44x
-# default n
-# select 440SP
-# help
-# This option enables support for the IBM PPC440SP evaluation board.
-
-#config OCOTEA
-# bool "Ocotea"
-# depends on 44x
-# default n
-# select 440GX
-# help
-# This option enables support for the IBM PPC440GX evaluation board.
-
-endmenu
-
-# 44x specific CPU modules, selected based on the board above.
-config 440EP
- bool
- select PPC_FPU
- select IBM440EP_ERR42
-
-config 440GP
- bool
- select IBM_NEW_EMAC_ZMII
-
-config 440GX
- bool
-
-config 440SP
- bool
-
-config 440A
- bool
- depends on 440GX
- default y
-
-# 44x errata/workaround config symbols, selected by the CPU models above
-config IBM440EP_ERR42
- bool
-
-#config XILINX_OCP
-# bool
-# depends on XILINX_ML300
-# default y
-
-#config BIOS_FIXUP
-# bool
-# depends on BUBINGA || EP405 || SYCAMORE || WALNUT
-# default y
-
-#config PPC4xx_DMA
-# bool "PPC4xx DMA controller support"
-# depends on 4xx
-
-#config PPC4xx_EDMA
-# bool
-# depends on !STB03xxx && PPC4xx_DMA
-# default y
--- linux-2.6.orig/arch/powerpc/platforms/4xx/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-# empty makefile so make clean works
\ No newline at end of file
--
More information about the Linuxppc-dev
mailing list