[patch 3/6] Add 8548 CDS PCI express controller node and PCI-X device node
Zang Roy-r61911
tie-fei.zang at freescale.com
Thu Jul 12 18:27:54 EST 2007
From: Roy Zang <tie-fei.zang at freescale.com>
Add 8548 CDS PCI express controller node and PCI-X device node.
The current dts file is suitable for 8548 Rev 2.0 board with
Arcadia 3.1.
This kind of board combination is the most popular.
Indentify pci, pcie host by compatible property "fsl,mpc85xx-pci"
and "fsl, mpc85xx-pciex".
Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>
---
Fix the PCI Express b,c,d, irq sense.
arch/powerpc/boot/dts/mpc8548cds.dts | 156 +++++++++++++++++++++++-----------
1 files changed, 105 insertions(+), 51 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 9d0b84b..d60821b 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -1,5 +1,5 @@
/*
- * MPC8555 CDS Device Tree Source
+ * MPC8548 CDS Device Tree Source
*
* Copyright 2006 Freescale Semiconductor Inc.
*
@@ -186,67 +186,96 @@
pci1: pci at 8000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
+ /* IDSEL 0x4 (PCIX Slot 2) */
+ 02000 0 0 1 &mpic 0 1
+ 02000 0 0 2 &mpic 1 1
+ 02000 0 0 3 &mpic 2 1
+ 02000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x5 (PCIX Slot 3) */
+ 02800 0 0 1 &mpic 1 1
+ 02800 0 0 2 &mpic 2 1
+ 02800 0 0 3 &mpic 3 1
+ 02800 0 0 4 &mpic 0 1
+
+ /* IDSEL 0x6 (PCIX Slot 4) */
+ 03000 0 0 1 &mpic 2 1
+ 03000 0 0 2 &mpic 3 1
+ 03000 0 0 3 &mpic 0 1
+ 03000 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x8 (PCIX Slot 5) */
+ 04000 0 0 1 &mpic 0 1
+ 04000 0 0 2 &mpic 1 1
+ 04000 0 0 3 &mpic 2 1
+ 04000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0xC (Tsi310 bridge) */
+ 06000 0 0 1 &mpic 0 1
+ 06000 0 0 2 &mpic 1 1
+ 06000 0 0 3 &mpic 2 1
+ 06000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x14 (Slot 2) */
+ 0a000 0 0 1 &mpic 0 1
+ 0a000 0 0 2 &mpic 1 1
+ 0a000 0 0 3 &mpic 2 1
+ 0a000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x15 (Slot 3) */
+ 0a800 0 0 1 &mpic 1 1
+ 0a800 0 0 2 &mpic 2 1
+ 0a800 0 0 3 &mpic 3 1
+ 0a800 0 0 4 &mpic 0 1
+
+ /* IDSEL 0x16 (Slot 4) */
+ 0b000 0 0 1 &mpic 2 1
+ 0b000 0 0 2 &mpic 3 1
+ 0b000 0 0 3 &mpic 0 1
+ 0b000 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x18 (Slot 5) */
+ 0c000 0 0 1 &mpic 0 1
+ 0c000 0 0 2 &mpic 1 1
+ 0c000 0 0 3 &mpic 2 1
+ 0c000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x1C (Tsi310 bridge PCI primary) */
+ 0E000 0 0 1 &mpic 0 1
+ 0E000 0 0 2 &mpic 1 1
+ 0E000 0 0 3 &mpic 2 1
+ 0E000 0 0 4 &mpic 3 1
+
+ /* bus 1 , idsel 0x2 Tsi310 bridge secondary */
+ 11000 0 0 1 &mpic 2 1
+ 11000 0 0 2 &mpic 3 1
+ 11000 0 0 3 &mpic 0 1
+ 11000 0 0 4 &mpic 1 1
+
+ /* VIA chip */
+ 12000 0 0 1 &mpic 0 1
+ 12000 0 0 2 &mpic 1 1
+ 12000 0 0 3 &mpic 2 1
+ 12000 0 0 4 &mpic 3 1>;
- /* IDSEL 0x10 */
- 08000 0 0 1 &mpic 0 1
- 08000 0 0 2 &mpic 1 1
- 08000 0 0 3 &mpic 2 1
- 08000 0 0 4 &mpic 3 1
-
- /* IDSEL 0x11 */
- 08800 0 0 1 &mpic 0 1
- 08800 0 0 2 &mpic 1 1
- 08800 0 0 3 &mpic 2 1
- 08800 0 0 4 &mpic 3 1
-
- /* IDSEL 0x12 (Slot 1) */
- 09000 0 0 1 &mpic 0 1
- 09000 0 0 2 &mpic 1 1
- 09000 0 0 3 &mpic 2 1
- 09000 0 0 4 &mpic 3 1
-
- /* IDSEL 0x13 (Slot 2) */
- 09800 0 0 1 &mpic 1 1
- 09800 0 0 2 &mpic 2 1
- 09800 0 0 3 &mpic 3 1
- 09800 0 0 4 &mpic 0 1
-
- /* IDSEL 0x14 (Slot 3) */
- 0a000 0 0 1 &mpic 2 1
- 0a000 0 0 2 &mpic 3 1
- 0a000 0 0 3 &mpic 0 1
- 0a000 0 0 4 &mpic 1 1
-
- /* IDSEL 0x15 (Slot 4) */
- 0a800 0 0 1 &mpic 3 1
- 0a800 0 0 2 &mpic 0 1
- 0a800 0 0 3 &mpic 1 1
- 0a800 0 0 4 &mpic 2 1
-
- /* Bus 1 (Tundra Bridge) */
- /* IDSEL 0x12 (ISA bridge) */
- 19000 0 0 1 &mpic 0 1
- 19000 0 0 2 &mpic 1 1
- 19000 0 0 3 &mpic 2 1
- 19000 0 0 4 &mpic 3 1>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00100000>;
+ ranges = <02000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 e2000000 0 00800000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8000 1000>;
- compatible = "85xx";
+ compatible = "fsl,mpc85xx-pci","85xx";
device_type = "pci";
- i8259 at 19000 {
+ i8259 at 4 {
clock-frequency = <0>;
interrupt-controller;
device_type = "interrupt-controller";
- reg = <19000 0 0 0 1>;
+ reg = <12000 0 0 0 1>;
#address-cells = <0>;
#interrupt-cells = <2>;
built-in;
@@ -266,17 +295,42 @@
a800 0 0 2 &mpic b 1
a800 0 0 3 &mpic b 1
a800 0 0 4 &mpic b 1>;
+
interrupt-parent = <&mpic>;
interrupts = <19 2>;
bus-range = <0 0>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 00100000>;
+ ranges = <02000000 0 90000000 90000000 0 10000000
+ 01000000 0 00000000 e2800000 0 00800000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <9000 1000>;
- compatible = "85xx";
+ compatible = "fsl,mpc85xx-pci","85xx";
+ device_type = "pci";
+ };
+ /* PCI Express */
+ pci at a000 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x0 (PEX) */
+ 00000 0 0 1 &mpic 0 1
+ 00000 0 0 2 &mpic 1 1
+ 00000 0 0 3 &mpic 2 1
+ 00000 0 0 4 &mpic 3 1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <1a 2>;
+ bus-range = <0 ff>;
+ ranges = <02000000 0 a0000000 a0000000 0 20000000
+ 01000000 0 00000000 e3000000 0 08000000>;
+ clock-frequency = <1fca055>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <a000 1000>;
+ compatible = "fsl,mpc86xx-pciex","86xx";
device_type = "pci";
};
--
1.5.1
More information about the Linuxppc-dev
mailing list