[PATCH 2/3] [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads
Vitaly Bordug
vbordug at ru.mvista.com
Wed Jan 31 15:50:59 EST 2007
Recent update of asm-powerpc/io.h caused cpm-related stuff to break in the
current kernel. Current patch fixes it, as well as other inconsistencies
expressed, that do not permit targets from working properly:
- fixed messed device IDs among CPM2 SoC devices,
- corrected odd header name and fixed type in defines,
- Added 82xx subdir to the powerpc/platforms Makefile, missed during
initial commit,
- new solely-powerpc header file for 8260 family (was using one from arch/ppc, this
one cleaned up from the extra stuff), in fact for now a placeholder to
get the board-specific includes for stuff not yet capable to live with
devicetree peeks only
- Fixed couple of misprints in reference mpc8272 dts.
Signed-off-by: Vitaly Bordug <vbordug at ru.mvista.com>
---
arch/powerpc/boot/dts/mpc8272ads.dts | 8 ++++----
arch/powerpc/platforms/82xx/mpc82xx.c | 2 +-
arch/powerpc/platforms/82xx/mpc82xx_ads.c | 2 +-
arch/powerpc/platforms/82xx/pq2ads.h | 5 +++--
arch/powerpc/platforms/Makefile | 1 +
drivers/net/fs_enet/fs_enet.h | 1 +
drivers/serial/cpm_uart/cpm_uart_cpm1.h | 3 ---
drivers/serial/cpm_uart/cpm_uart_cpm2.h | 3 ---
include/asm-powerpc/fs_pd.h | 6 ++++++
include/asm-powerpc/io.h | 6 ++++++
10 files changed, 23 insertions(+), 14 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 8bbc8fa..b4ce1ba 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -58,8 +58,8 @@
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
- ranges = < 0 0 2 00000000 f0000000 00053000>;
- reg = <f0000000 0>;
+ ranges = <00000000 f0000000 00053000>;
+ reg = <f0000000 10000>;
mdio at 0 {
device_type = "mdio";
@@ -123,8 +123,8 @@
#interrupt-cells = <2>;
device_type = "cpm";
model = "CPM2";
- ranges = <00000000 00000000 3ffff>;
- reg = <10d80 3280>;
+ ranges = <00000000 00000000 20000>;
+ reg = <0 20000>;
command-proc = <119c0>;
brg-frequency = <17D7840>;
cpm_clk = <BEBC200>;
diff --git a/arch/powerpc/platforms/82xx/mpc82xx.c b/arch/powerpc/platforms/82xx/mpc82xx.c
index 0f5b30d..74e7892 100644
--- a/arch/powerpc/platforms/82xx/mpc82xx.c
+++ b/arch/powerpc/platforms/82xx/mpc82xx.c
@@ -50,7 +50,7 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/cpm2_pic.h>
-#include "pq2ads_pd.h"
+#include "pq2ads.h"
static int __init get_freq(char *name, unsigned long *val)
{
diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
index ea880f1..7334c1a 100644
--- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
@@ -51,7 +51,7 @@
#include <sysdev/fsl_soc.h>
#include <../sysdev/cpm2_pic.h>
-#include "pq2ads_pd.h"
+#include "pq2ads.h"
#ifdef CONFIG_PCI
static uint pci_clk_frq;
diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h
index fb2f92b..5b5cca6 100644
--- a/arch/powerpc/platforms/82xx/pq2ads.h
+++ b/arch/powerpc/platforms/82xx/pq2ads.h
@@ -22,6 +22,7 @@
#ifndef __MACH_ADS8260_DEFS
#define __MACH_ADS8260_DEFS
+#include <linux/seq_file.h>
#include <asm/ppcboot.h>
/* For our show_cpuinfo hooks. */
@@ -46,12 +47,12 @@
#define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 ==enable */
#define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 ==enable */
#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable*/
-#define BCSR3_FETH2_RS ((uint)0x80000000) /* 0 == reset */
+#define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */
/* cpm serial driver works with constants below */
#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET)
-#define SIU_INT_SMC2i ((uint)0x05+CPM_IRQ_OFFSET)
+#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET)
#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET)
#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET)
#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET)
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 507d1b9..f750212 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -8,6 +8,7 @@ endif
obj-$(CONFIG_PPC_MPC52xx) += 52xx/
obj-$(CONFIG_PPC_CHRP) += chrp/
obj-$(CONFIG_4xx) += 4xx/
+obj-$(CONFIG_PPC_82xx) += 82xx/
obj-$(CONFIG_PPC_83xx) += 83xx/
obj-$(CONFIG_PPC_85xx) += 85xx/
obj-$(CONFIG_PPC_86xx) += 86xx/
diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h
index 92590d8..569be22 100644
--- a/drivers/net/fs_enet/fs_enet.h
+++ b/drivers/net/fs_enet/fs_enet.h
@@ -9,6 +9,7 @@
#include <linux/dma-mapping.h>
#include <linux/fs_enet_pd.h>
+#include <asm/fs_pd.h>
#ifdef CONFIG_CPM1
#include <asm/commproc.h>
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
index 5eb49ea..a99e45e 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.h
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
@@ -20,9 +20,6 @@
#define SCC3_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC3)
#define SCC4_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC4)
-/* the CPM address */
-#define CPM_ADDR IMAP_ADDR
-
static inline void cpm_set_brg(int brg, int baud)
{
cpm_setbrg(brg, baud);
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
index 4b77911..1b3219f 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.h
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
@@ -20,9 +20,6 @@
#define SCC3_IRQ SIU_INT_SCC3
#define SCC4_IRQ SIU_INT_SCC4
-/* the CPM address */
-#define CPM_ADDR CPM_MAP_ADDR
-
static inline void cpm_set_brg(int brg, int baud)
{
cpm_setbrg(brg, baud);
diff --git a/include/asm-powerpc/fs_pd.h b/include/asm-powerpc/fs_pd.h
index 3d0e819..2ba51b9 100644
--- a/include/asm-powerpc/fs_pd.h
+++ b/include/asm-powerpc/fs_pd.h
@@ -25,6 +25,12 @@ static inline int uart_clock(void)
return ppc_proc_freq;
}
+#if defined(CONFIG_8260)
+#include <asm/mpc8260.h>
+#elif defined(CONFIG_85xx)
+#include <asm/mpc85xx.h>
+#endif
+
#define cpm2_map(member) \
({ \
u32 offset = offsetof(cpm2_map_t, member); \
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index 1cd5323..301c9bb 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -732,6 +732,12 @@ static inline void * bus_to_virt(unsigned long address)
#endif /* CONFIG_PPC32 */
+/* access ports */
+#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v))
+#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
+
+#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v))
+#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
#endif /* __KERNEL__ */
More information about the Linuxppc-dev
mailing list