[PATCH] Add the mpc8323emds.dts
Kim Phillips
kim.phillips at freescale.com
Wed Jan 31 09:09:13 EST 2007
Add the mpc8323emds device tree source (dts)
Signed-off-by: Scott Wood <scottwood at freescale.com>
Signed-off-by: Kim Phillips <kim.phillips at freescale.com>
---
arch/powerpc/boot/dts/mpc8323emds.dts | 345 +++++++++++++++++++++++++++++++++
1 files changed, 345 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8323emds.dts b/arch/powerpc/boot/dts/mpc8323emds.dts
new file mode 100644
index 0000000..fa7ef24
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8323emds.dts
@@ -0,0 +1,345 @@
+/*
+ * MPC8323E EMDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/ {
+ model = "MPC8323EMDS";
+ compatible = "MPC83xx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8323 at 0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ 32-bit;
+ linux,phandle = <201>;
+ linux,boot-cpu;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 08000000>;
+ };
+
+ bcsr at f8000000 {
+ device_type = "board-control";
+ reg = <f8000000 8000>;
+ };
+
+ soc8323 at e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00000200>;
+ bus-frequency = <7DE2900>;
+
+ wdt at 200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <200 100>;
+ };
+
+ i2c at 3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <e 8>;
+ interrupt-parent = <700>;
+ dfsrr;
+ };
+
+ serial at 4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>;
+ clock-frequency = <0>;
+ interrupts = <9 8>;
+ interrupt-parent = <700>;
+ };
+
+ serial at 4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>;
+ clock-frequency = <0>;
+ interrupts = <a 8>;
+ interrupt-parent = <700>;
+ };
+
+ crypto at 30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";
+ reg = <30000 7000>;
+ interrupts = <b 8>;
+ interrupt-parent = <700>;
+ /* Rev. 2.2 */
+ num-channels = <1>;
+ channel-fifo-len = <18>;
+ exec-units-mask = <0000004c>;
+ descriptor-types-mask = <0122003f>;
+ };
+
+ pci at 8500 {
+ linux,phandle = <8500>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x11 AD17 */
+ 8800 0 0 1 700 14 8
+ 8800 0 0 2 700 15 8
+ 8800 0 0 3 700 16 8
+ 8800 0 0 4 700 17 8
+
+ /* IDSEL 0x12 AD18 */
+ 9000 0 0 1 700 16 8
+ 9000 0 0 2 700 17 8
+ 9000 0 0 3 700 14 8
+ 9000 0 0 4 700 15 8
+
+ /* IDSEL 0x13 AD19 */
+ 9800 0 0 1 700 17 8
+ 9800 0 0 2 700 14 8
+ 9800 0 0 3 700 15 8
+ 9800 0 0 4 700 16 8
+
+ /* IDSEL 0x15 AD21*/
+ a800 0 0 1 700 14 8
+ a800 0 0 2 700 15 8
+ a800 0 0 3 700 16 8
+ a800 0 0 4 700 17 8
+
+ /* IDSEL 0x16 AD22*/
+ b000 0 0 1 700 17 8
+ b000 0 0 2 700 14 8
+ b000 0 0 3 700 15 8
+ b000 0 0 4 700 16 8
+
+ /* IDSEL 0x17 AD23*/
+ b800 0 0 1 700 16 8
+ b800 0 0 2 700 17 8
+ b800 0 0 3 700 14 8
+ b800 0 0 4 700 15 8
+
+ /* IDSEL 0x18 AD24*/
+ c000 0 0 1 700 15 8
+ c000 0 0 2 700 16 8
+ c000 0 0 3 700 17 8
+ c000 0 0 4 700 14 8>;
+ interrupt-parent = <700>;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 90000000 0 10000000
+ 42000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 d0000000 0 00100000>;
+ clock-frequency = <0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8500 100>;
+ compatible = "83xx";
+ device_type = "pci";
+ };
+
+ pic at 700 {
+ linux,phandle = <700>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <700 100>;
+ built-in;
+ device_type = "ipic";
+ };
+
+ par_io at 1400 {
+ reg = <1400 100>;
+ device_type = "par_io";
+ num-ports = <7>;
+
+ ucc_pin at 03 {
+ linux,phandle = <140003>;
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 3 4 3 0 2 0 /* MDIO */
+ 3 5 1 0 2 0 /* MDC */
+ 0 d 2 0 1 0 /* RX_CLK (CLK9) */
+ 3 18 2 0 1 0 /* TX_CLK (CLK10) */
+ 1 1 1 0 1 0 /* TxD1 */
+ 1 0 1 0 1 0 /* TxD0 */
+ 1 1 1 0 1 0 /* TxD1 */
+ 1 2 1 0 1 0 /* TxD2 */
+ 1 3 1 0 1 0 /* TxD3 */
+ 1 4 2 0 1 0 /* RxD0 */
+ 1 5 2 0 1 0 /* RxD1 */
+ 1 6 2 0 1 0 /* RxD2 */
+ 1 7 2 0 1 0 /* RxD3 */
+ 1 8 2 0 1 0 /* RX_ER */
+ 1 9 1 0 1 0 /* TX_ER */
+ 1 a 2 0 1 0 /* RX_DV */
+ 1 b 2 0 1 0 /* COL */
+ 1 c 1 0 1 0 /* TX_EN */
+ 1 d 2 0 1 0>;/* CRS */
+ };
+ ucc_pin at 04 {
+ linux,phandle = <140004>;
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 3 1f 2 0 1 0 /* RX_CLK (CLK7) */
+ 3 6 2 0 1 0 /* TX_CLK (CLK8) */
+ 1 12 1 0 1 0 /* TxD0 */
+ 1 13 1 0 1 0 /* TxD1 */
+ 1 14 1 0 1 0 /* TxD2 */
+ 1 15 1 0 1 0 /* TxD3 */
+ 1 16 2 0 1 0 /* RxD0 */
+ 1 17 2 0 1 0 /* RxD1 */
+ 1 18 2 0 1 0 /* RxD2 */
+ 1 19 2 0 1 0 /* RxD3 */
+ 1 1a 2 0 1 0 /* RX_ER */
+ 1 1b 1 0 1 0 /* TX_ER */
+ 1 1c 2 0 1 0 /* RX_DV */
+ 1 1d 2 0 1 0 /* COL */
+ 1 1e 1 0 1 0 /* TX_EN */
+ 1 1f 2 0 1 0>;/* CRS */
+ };
+ };
+ };
+
+ qe at e0100000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ model = "QE";
+ ranges = <0 e0100000 00100000>;
+ reg = <e0100000 480>;
+ brg-frequency = <0>;
+ bus-frequency = <BCD3D80>;
+
+ muram at 10000 {
+ device_type = "muram";
+ ranges = <0 00010000 00004000>;
+
+ data-only at 0 {
+ reg = <0 4000>;
+ };
+ };
+
+ spi at 4c0 {
+ device_type = "spi";
+ compatible = "fsl_spi";
+ reg = <4c0 40>;
+ interrupts = <2>;
+ interrupt-parent = <80>;
+ mode = "cpu";
+ };
+
+ spi at 500 {
+ device_type = "spi";
+ compatible = "fsl_spi";
+ reg = <500 40>;
+ interrupts = <1>;
+ interrupt-parent = <80>;
+ mode = "cpu";
+ };
+
+ usb at 6c0 {
+ device_type = "usb";
+ compatible = "qe_udc";
+ reg = <6c0 40 8B00 100>;
+ interrupts = <b>;
+ interrupt-parent = <80>;
+ mode = "slave";
+ };
+
+ ucc at 2200 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ model = "UCC";
+ device-id = <3>;
+ reg = <2200 200>;
+ interrupts = <22>;
+ interrupt-parent = <80>;
+ mac-address = [ 00 04 9f 00 23 23 ];
+ rx-clock = <19>;
+ tx-clock = <1a>;
+ phy-handle = <212003>;
+ pio-handle = <140003>;
+ };
+
+ ucc at 3200 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ model = "UCC";
+ device-id = <4>;
+ reg = <3000 200>;
+ interrupts = <23>;
+ interrupt-parent = <80>;
+ mac-address = [ 00 11 22 33 44 55 ];
+ rx-clock = <17>;
+ tx-clock = <18>;
+ phy-handle = <212004>;
+ pio-handle = <140004>;
+ };
+
+ mdio at 2320 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2320 18>;
+ device_type = "mdio";
+ compatible = "ucc_geth_phy";
+
+ ethernet-phy at 03 {
+ linux,phandle = <212003>;
+ interrupt-parent = <700>;
+ interrupts = <11 2>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ interface = <3>; //ENET_100_MII
+ };
+ ethernet-phy at 04 {
+ linux,phandle = <212004>;
+ interrupt-parent = <700>;
+ interrupts = <12 2>;
+ reg = <4>;
+ device_type = "ethernet-phy";
+ interface = <3>;
+ };
+ };
+
+ qeic at 80 {
+ linux,phandle = <80>;
+ interrupt-controller;
+ device_type = "qeic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <80 80>;
+ built-in;
+ big-endian;
+ interrupts = <20 8 21 8>; //high:32 low:33
+ interrupt-parent = <700>;
+ };
+ };
+};
--
1.4.4
More information about the Linuxppc-dev
mailing list