[PATCH] powerpc: MPIC: support more than 256 sources
Olof Johansson
olof at lixom.net
Fri Jan 26 08:38:34 EST 2007
Allow more than the default 256 MPIC sources. Allocates a new flag
(MPIC_LARGE_VECTORS) to be used by platform code when instantiating
the mpic.
I picked 11 bits worth right now since it would cover the number of
sources on any hardware I have seen. It can always be increased later
if needed.
Signed-off-by: Olof Johansson <olof at lixom.net>
Index: powerpc/arch/powerpc/sysdev/mpic.c
===================================================================
--- powerpc.orig/arch/powerpc/sysdev/mpic.c
+++ powerpc/arch/powerpc/sysdev/mpic.c
@@ -496,13 +496,18 @@ static void __init mpic_scan_ht_pics(str
static struct mpic *mpic_find(unsigned int irq, unsigned int *is_ipi)
{
unsigned int src = mpic_irq_to_hw(irq);
+ struct mpic *mpic;
if (irq < NUM_ISA_INTERRUPTS)
return NULL;
+
+ mpic = irq_desc[irq].chip_data;
+
if (is_ipi)
- *is_ipi = (src >= MPIC_VEC_IPI_0 && src <= MPIC_VEC_IPI_3);
+ *is_ipi = (src >= mpic->ipi_vecs[0] &&
+ src <= mpic->ipi_vecs[3]);
- return irq_desc[irq].chip_data;
+ return mpic;
}
/* Convert a cpu mask from logical to physical cpu numbers. */
@@ -540,7 +545,11 @@ static inline void mpic_eoi(struct mpic
#ifdef CONFIG_SMP
static irqreturn_t mpic_ipi_action(int irq, void *dev_id)
{
- smp_message_recv(mpic_irq_to_hw(irq) - MPIC_VEC_IPI_0);
+ struct mpic *mpic;
+
+ mpic = mpic_find(irq, NULL);
+ smp_message_recv(mpic_irq_to_hw(irq) - mpic->ipi_vecs[0]);
+
return IRQ_HANDLED;
}
#endif /* CONFIG_SMP */
@@ -663,7 +672,7 @@ static void mpic_end_ht_irq(unsigned int
static void mpic_unmask_ipi(unsigned int irq)
{
struct mpic *mpic = mpic_from_ipi(irq);
- unsigned int src = mpic_irq_to_hw(irq) - MPIC_VEC_IPI_0;
+ unsigned int src = mpic_irq_to_hw(irq) - mpic->ipi_vecs[0];
DBG("%s: enable_ipi: %d (ipi %d)\n", mpic->name, irq, src);
mpic_ipi_write(src, mpic_ipi_read(src) & ~MPIC_VECPRI_MASK);
@@ -807,11 +816,11 @@ static int mpic_host_map(struct irq_host
DBG("mpic: map virq %d, hwirq 0x%lx\n", virq, hw);
- if (hw == MPIC_VEC_SPURRIOUS)
+ if (hw == mpic->spurious_vec)
return -EINVAL;
#ifdef CONFIG_SMP
- else if (hw >= MPIC_VEC_IPI_0) {
+ else if (hw >= mpic->ipi_vecs[0]) {
WARN_ON(!(mpic->flags & MPIC_PRIMARY));
DBG("mpic: mapping as IPI\n");
@@ -904,6 +913,7 @@ struct mpic * __init mpic_alloc(struct d
u32 reg;
const char *vers;
int i;
+ int intvec_base;
u64 paddr = phys_addr;
mpic = alloc_bootmem(sizeof(struct mpic));
@@ -914,9 +924,9 @@ struct mpic * __init mpic_alloc(struct d
mpic->name = name;
mpic->of_node = of_node_get(node);
- mpic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 256,
+ mpic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, isu_size,
&mpic_host_ops,
- MPIC_VEC_SPURRIOUS);
+ flags & MPIC_LARGE_VECTORS ? 2048 : 256);
if (mpic->irqhost == NULL) {
of_node_put(node);
return NULL;
@@ -944,6 +954,21 @@ struct mpic * __init mpic_alloc(struct d
mpic->irq_count = irq_count;
mpic->num_sources = 0; /* so far */
+ if (flags & MPIC_LARGE_VECTORS)
+ intvec_base = 2039;
+ else
+ intvec_base = 247;
+
+ mpic->timer_vecs[0] = intvec_base;
+ mpic->timer_vecs[1] = intvec_base+1;
+ mpic->timer_vecs[2] = intvec_base+2;
+ mpic->timer_vecs[3] = intvec_base+3;
+ mpic->ipi_vecs[0] = intvec_base+4;
+ mpic->ipi_vecs[1] = intvec_base+5;
+ mpic->ipi_vecs[2] = intvec_base+6;
+ mpic->ipi_vecs[3] = intvec_base+7;
+ mpic->spurious_vec = intvec_base+8;
+
/* Check for "big-endian" in device-tree */
if (node && get_property(node, "big-endian", NULL) != NULL)
mpic->flags |= MPIC_BIG_ENDIAN;
@@ -1084,11 +1109,6 @@ void __init mpic_init(struct mpic *mpic)
int i;
BUG_ON(mpic->num_sources == 0);
- WARN_ON(mpic->num_sources > MPIC_VEC_IPI_0);
-
- /* Sanitize source count */
- if (mpic->num_sources > MPIC_VEC_IPI_0)
- mpic->num_sources = MPIC_VEC_IPI_0;
printk(KERN_INFO "mpic: Initializing for %d sources\n", mpic->num_sources);
@@ -1104,7 +1124,7 @@ void __init mpic_init(struct mpic *mpic)
i * MPIC_INFO(TIMER_STRIDE) +
MPIC_INFO(TIMER_VECTOR_PRI),
MPIC_VECPRI_MASK |
- (MPIC_VEC_TIMER_0 + i));
+ (mpic->timer_vecs[0] + i));
}
/* Initialize IPIs to our reserved vectors and mark them disabled for now */
@@ -1113,7 +1133,7 @@ void __init mpic_init(struct mpic *mpic)
mpic_ipi_write(i,
MPIC_VECPRI_MASK |
(10 << MPIC_VECPRI_PRIORITY_SHIFT) |
- (MPIC_VEC_IPI_0 + i));
+ (mpic->ipi_vecs[0] + i));
}
/* Initialize interrupt sources */
@@ -1136,8 +1156,8 @@ void __init mpic_init(struct mpic *mpic)
1 << hard_smp_processor_id());
}
- /* Init spurrious vector */
- mpic_write(mpic->gregs, MPIC_INFO(GREG_SPURIOUS), MPIC_VEC_SPURRIOUS);
+ /* Init spurious vector */
+ mpic_write(mpic->gregs, MPIC_INFO(GREG_SPURIOUS), mpic->spurious_vec);
/* Disable 8259 passthrough, if supported */
if (!(mpic->flags & MPIC_NO_PTHROU_DIS))
@@ -1184,9 +1204,9 @@ void mpic_irq_set_priority(unsigned int
spin_lock_irqsave(&mpic_lock, flags);
if (is_ipi) {
- reg = mpic_ipi_read(src - MPIC_VEC_IPI_0) &
+ reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) &
~MPIC_VECPRI_PRIORITY_MASK;
- mpic_ipi_write(src - MPIC_VEC_IPI_0,
+ mpic_ipi_write(src - mpic->ipi_vecs[0],
reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
} else {
reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI))
@@ -1207,7 +1227,7 @@ unsigned int mpic_irq_get_priority(unsig
spin_lock_irqsave(&mpic_lock, flags);
if (is_ipi)
- reg = mpic_ipi_read(src = MPIC_VEC_IPI_0);
+ reg = mpic_ipi_read(src = mpic->ipi_vecs[0]);
else
reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
spin_unlock_irqrestore(&mpic_lock, flags);
@@ -1313,7 +1333,7 @@ unsigned int mpic_get_one_irq(struct mpi
#ifdef DEBUG_LOW
DBG("%s: get_one_irq(): %d\n", mpic->name, src);
#endif
- if (unlikely(src == MPIC_VEC_SPURRIOUS))
+ if (unlikely(src == mpic->spurious_vec))
return NO_IRQ;
return irq_linear_revmap(mpic->irqhost, src);
}
@@ -1345,7 +1365,7 @@ void mpic_request_ipis(void)
for (i = 0; i < 4; i++) {
unsigned int vipi = irq_create_mapping(mpic->irqhost,
- MPIC_VEC_IPI_0 + i);
+ mpic->ipi_vecs[0] + i);
if (vipi == NO_IRQ) {
printk(KERN_ERR "Failed to map IPI %d\n", i);
break;
Index: powerpc/include/asm-powerpc/mpic.h
===================================================================
--- powerpc.orig/include/asm-powerpc/mpic.h
+++ powerpc/include/asm-powerpc/mpic.h
@@ -103,21 +103,6 @@
#define MPIC_MAX_ISU 32
/*
- * Special vector numbers (internal use only)
- */
-#define MPIC_VEC_SPURRIOUS 255
-#define MPIC_VEC_IPI_3 254
-#define MPIC_VEC_IPI_2 253
-#define MPIC_VEC_IPI_1 252
-#define MPIC_VEC_IPI_0 251
-
-/* unused */
-#define MPIC_VEC_TIMER_3 250
-#define MPIC_VEC_TIMER_2 249
-#define MPIC_VEC_TIMER_1 248
-#define MPIC_VEC_TIMER_0 247
-
-/*
* Tsi108 implementation of MPIC has many differences from the original one
*/
@@ -276,6 +261,13 @@ struct mpic
unsigned char *senses;
unsigned int senses_count;
+ /* vector numbers used for internal sources (ipi/timers) */
+ unsigned int ipi_vecs[4];
+ unsigned int timer_vecs[4];
+
+ /* Spurious vector to program into unused sources */
+ unsigned int spurious_vec;
+
#ifdef CONFIG_MPIC_BROKEN_U3
/* The fixup table */
struct mpic_irq_fixup *fixups;
@@ -332,6 +324,8 @@ struct mpic
#define MPIC_NO_PTHROU_DIS 0x00000040
/* DCR based MPIC */
#define MPIC_USES_DCR 0x00000080
+/* MPIC has 11-bit vector fields (or larger) */
+#define MPIC_LARGE_VECTORS 0x00000100
/* MPIC HW modification ID */
#define MPIC_REGSET_MASK 0xf0000000
Index: powerpc/arch/powerpc/platforms/pasemi/setup.c
===================================================================
--- powerpc.orig/arch/powerpc/platforms/pasemi/setup.c
+++ powerpc/arch/powerpc/platforms/pasemi/setup.c
@@ -130,8 +130,9 @@ static __init void pas_init_IRQ(void)
openpic_addr = of_read_number(opprop, naddr);
printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
- mpic = mpic_alloc(mpic_node, openpic_addr, MPIC_PRIMARY, 0, 0,
- " PAS-OPIC ");
+ mpic = mpic_alloc(mpic_node, openpic_addr,
+ MPIC_PRIMARY|MPIC_LARGE_VECTORS,
+ 0, 0, " PAS-OPIC ");
BUG_ON(!mpic);
mpic_assign_isu(mpic, 0, openpic_addr + 0x10000);
More information about the Linuxppc-dev
mailing list