[PATCH] Fix Maple PATA IRQ assignment.

Benjamin Herrenschmidt benh at kernel.crashing.org
Tue Jan 2 11:18:06 EST 2007


On Mon, 2007-01-01 at 19:31 +0000, David Woodhouse wrote:
> On the Maple board, the AMD8111 IDE is in legacy mode... except that it
> appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by
> the architecture's "pci_get_legacy_ide_irq()" function, but in libata we
> just hard-code the numbers 14 and 15.
> 
> This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as
> appropriate, having added a pci_dev argument to the
> ATA_{PRIM,SECOND}ARY_IRQ macros.
> 
> There's probably a better way to do this -- especially if we observe
> that the _only_ case in which this seemingly-generic
> "pci_get_legacy_ide_irq()" function returns anything other than 14 and
> 15 for primary and secondary respectively is the case of the AMD8111 on
> the Maple board -- couldn't we handle that with a special case in the
> pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into
> native mode during early boot and assign resources properly?
> 
> Signed-off-by: David Woodhouse <dwmw2 at infradead.org>

Acked-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>

> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 0673dbe..1857707 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -484,6 +484,7 @@ config PPC_MAPLE
>  	select PPC_970_NAP
>  	select PPC_NATIVE
>  	select PPC_RTAS
> +	select ATA_NONSTANDARD if ATA
>  	default n
>  	help
>            This option enables support for the Maple 970FX Evaluation Board.
> diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
> index 7645f2b..bf44f6d 100644
> --- a/drivers/ata/libata-sff.c
> +++ b/drivers/ata/libata-sff.c
> @@ -879,7 +879,7 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
>  	probe_ent->n_ports = 2;
>  
>  	if (port_mask & ATA_PORT_PRIMARY) {
> -		probe_ent->irq = ATA_PRIMARY_IRQ;
> +		probe_ent->irq = ATA_PRIMARY_IRQ(pdev);
>  		probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD;
>  		probe_ent->port[0].altstatus_addr =
>  		probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL;
> @@ -894,9 +894,9 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
>  
>  	if (port_mask & ATA_PORT_SECONDARY) {
>  		if (probe_ent->irq)
> -			probe_ent->irq2 = ATA_SECONDARY_IRQ;
> +			probe_ent->irq2 = ATA_SECONDARY_IRQ(pdev);
>  		else
> -			probe_ent->irq = ATA_SECONDARY_IRQ;
> +			probe_ent->irq = ATA_SECONDARY_IRQ(pdev);
>  		probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD;
>  		probe_ent->port[1].altstatus_addr =
>  		probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL;
> diff --git a/include/asm-generic/libata-portmap.h b/include/asm-generic/libata-portmap.h
> index 9202fd0..ec742ca 100644
> --- a/include/asm-generic/libata-portmap.h
> +++ b/include/asm-generic/libata-portmap.h
> @@ -1,12 +1,12 @@
>  #ifndef __ASM_GENERIC_LIBATA_PORTMAP_H
>  #define __ASM_GENERIC_LIBATA_PORTMAP_H
>  
>  #define ATA_PRIMARY_CMD		0x1F0
>  #define ATA_PRIMARY_CTL		0x3F6
> -#define ATA_PRIMARY_IRQ		14
> +#define ATA_PRIMARY_IRQ(dev)	14
>  
>  #define ATA_SECONDARY_CMD	0x170
>  #define ATA_SECONDARY_CTL	0x376
> -#define ATA_SECONDARY_IRQ	15
> +#define ATA_SECONDARY_IRQ(dev)	15
>  
>  #endif
> --- /dev/null	2006-12-19 10:44:19.206057770 +0000
> +++ b/include/asm-powerpc/libata-portmap.h	2006-12-31 00:32:04.000000000 +0000
> @@ -0,0 +1,12 @@
> +#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H
> +#define __ASM_POWERPC_LIBATA_PORTMAP_H
> +
> +#define ATA_PRIMARY_CMD	0x1F0
> +#define ATA_PRIMARY_CTL	0x3F6
> +#define ATA_PRIMARY_IRQ(dev)	pci_get_legacy_ide_irq(dev, 0)
> +
> +#define ATA_SECONDARY_CMD	0x170
> +#define ATA_SECONDARY_CTL	0x376
> +#define ATA_SECONDARY_IRQ(dev)	pci_get_legacy_ide_irq(dev, 1)
> +
> +#endif
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 03f6338..6a38c9b 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -19,6 +19,10 @@ config ATA
>  
>  if ATA
>  
> +config ATA_NONSTANDARD
> +       bool
> +       default n
> +
>  config SATA_AHCI
>  	tristate "AHCI SATA support"
>  	depends on PCI
> 
> 




More information about the Linuxppc-dev mailing list