Automatically lmb_reserve() initrd

[David Gibson]

Paulus, I think this one's ready to go now.  For backwards
compatibility, it should only be applied after my patch which makes
multiple identical lmb_reserve() calls valid.

At present, when an initrd is passed to the kernel used flat device
tree properties, the memory the initrd occupies must also be reserved
in the flat tree's reserve map, or the kernel may overwrite it.  That
makes life more complicated than it could be for the bootwrapper.

This patch makes the kernel automatically reserve the initrd's space.
That in turn requires parsing the initrd parameters earlier than they
are currently, in early_init_dt_scan_chosen() instead of
check_for_initrd().

Signed-off-by: David Gibson <dwg at au1.ibm.com>

Index: working-2.6/arch/powerpc/kernel/prom.c
===================================================================
--- working-2.6.orig/arch/powerpc/kernel/prom.c	2007-02-09 15:12:00.000000000 +1100
+++ working-2.6/arch/powerpc/kernel/prom.c	2007-02-09 15:14:27.000000000 +1100
@@ -719,6 +719,7 @@ static int __init early_init_dt_scan_cho
 					    const char *uname, int depth, void *data)
 {
 	unsigned long *lprop;
+	u32 *prop;
 	unsigned long l;
 	char *p;
 
@@ -760,6 +761,22 @@ static int __init early_init_dt_scan_cho
                crashk_res.end = crashk_res.start + *lprop - 1;
 #endif
 
+#ifdef CONFIG_BLK_DEV_INITRD
+	DBG("Looking for initrd properties... ");
+	prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
+	if (prop) {
+		initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4));
+		prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
+		if (prop) {
+			initrd_end = (unsigned long)__va(of_read_ulong(prop, l/4));
+			initrd_below_start_ok = 1;
+		} else {
+			initrd_start = 0;
+		}
+	}
+	DBG("initrd_start=0x%lx  initrd_end=0x%lx\n", initrd_start, initrd_end);
+#endif /* CONFIG_BLK_DEV_INITRD */
+
 	/* Retreive command line */
  	p = of_get_flat_dt_prop(node, "bootargs", &l);
 	if (p != NULL && l > 0)
@@ -926,6 +943,12 @@ static void __init early_reserve_mem(voi
 	self_size = initial_boot_params->totalsize;
 	lmb_reserve(self_base, self_size);
 
+#ifdef CONFIG_BLK_DEV_INITRD
+	/* then reserve the initrd, if any */
+	if (initrd_start && (initrd_end > initrd_start))
+		lmb_reserve(__pa(initrd_start), initrd_end - initrd_start);
+#endif /* CONFIG_BLK_DEV_INITRD */
+
 #ifdef CONFIG_PPC32
 	/* 
 	 * Handle the case where we might be booting from an old kexec
Index: working-2.6/arch/powerpc/kernel/setup-common.c
===================================================================
--- working-2.6.orig/arch/powerpc/kernel/setup-common.c	2007-01-24 12:01:17.000000000 +1100
+++ working-2.6/arch/powerpc/kernel/setup-common.c	2007-02-09 15:15:15.000000000 +1100
@@ -304,26 +304,8 @@ struct seq_operations cpuinfo_op = {
 void __init check_for_initrd(void)
 {
 #ifdef CONFIG_BLK_DEV_INITRD
-	const unsigned int *prop;
-	int len;
-
-	DBG(" -> check_for_initrd()\n");
-
-	if (of_chosen) {
-		prop = get_property(of_chosen, "linux,initrd-start", &len);
-		if (prop != NULL) {
-			initrd_start = (unsigned long)
-				__va(of_read_ulong(prop, len / 4));
-			prop = get_property(of_chosen,
-					"linux,initrd-end", &len);
-			if (prop != NULL) {
-				initrd_end = (unsigned long)
-					__va(of_read_ulong(prop, len / 4));
-				initrd_below_start_ok = 1;
-			} else
-				initrd_start = 0;
-		}
-	}
+	DBG(" -> check_for_initrd()  initrd_start=0x%lx  initrd_end=0x%lx\n",
+	    initrd_start, initrd_end);
 
 	/* If we were passed an initrd, set the ROOT_DEV properly if the values
 	 * look sensible. If not, clear initrd reference.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson