[PATCH 06/10] powerpc: Small cleanup of EFIKA platform
Sylvain Munaut
tnt at 246tNt.com
Tue Feb 13 09:13:24 EST 2007
The efika platform used three files efika-pci.c efika-setup.c and
a 2 line efika.h to link the two. The total of code in those is
really not much and therefore, I think they're better merged
in a single file.
There is absolutely _no_code_change_ at all, just merged the files.
Signed-off-by: Sylvain Munaut <tnt at 246tNt.com>
Acked-by: Grant Likely <grant.likely at secretlab.ca>
---
arch/powerpc/platforms/52xx/Makefile | 2
arch/powerpc/platforms/52xx/efika-pci.c | 119 --------------
arch/powerpc/platforms/52xx/efika-setup.c | 121 --------------
arch/powerpc/platforms/52xx/efika.c | 243 +++++++++++++++++++++++++++++
arch/powerpc/platforms/52xx/efika.h | 19 --
5 files changed, 244 insertions(+), 260 deletions(-)
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index 795b713..07cdbca 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -6,5 +6,5 @@ obj-y += mpc52xx_pic.o mpc52xx_common
obj-$(CONFIG_PCI) += mpc52xx_pci.o
endif
-obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o
+obj-$(CONFIG_PPC_EFIKA) += efika.o
obj-$(CONFIG_PPC_LITE5200) += lite5200.o
diff --git a/arch/powerpc/platforms/52xx/efika-pci.c b/arch/powerpc/platforms/52xx/efika-pci.c
deleted file mode 100644
index 62e05b2..0000000
--- a/arch/powerpc/platforms/52xx/efika-pci.c
+++ /dev/null
@@ -1,119 +0,0 @@
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-#include <asm/sections.h>
-#include <asm/pci-bridge.h>
-#include <asm/rtas.h>
-
-#include "efika.h"
-
-#ifdef CONFIG_PCI
-/*
- * Access functions for PCI config space using RTAS calls.
- */
-static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
- int len, u32 * val)
-{
- struct pci_controller *hose = bus->sysdata;
- unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
- | (((bus->number - hose->first_busno) & 0xff) << 16)
- | (hose->index << 24);
- int ret = -1;
- int rval;
-
- rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len);
- *val = ret;
- return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-}
-
-static int rtas_write_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int len, u32 val)
-{
- struct pci_controller *hose = bus->sysdata;
- unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
- | (((bus->number - hose->first_busno) & 0xff) << 16)
- | (hose->index << 24);
- int rval;
-
- rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL,
- addr, len, val);
- return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops rtas_pci_ops = {
- rtas_read_config,
- rtas_write_config
-};
-
-void __init efika_pcisetup(void)
-{
- const int *bus_range;
- int len;
- struct pci_controller *hose;
- struct device_node *root;
- struct device_node *pcictrl;
-
- root = of_find_node_by_path("/");
- if (root == NULL) {
- printk(KERN_WARNING EFIKA_PLATFORM_NAME
- ": Unable to find the root node\n");
- return;
- }
-
- for (pcictrl = NULL;;) {
- pcictrl = of_get_next_child(root, pcictrl);
- if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0))
- break;
- }
-
- of_node_put(root);
-
- if (pcictrl == NULL) {
- printk(KERN_WARNING EFIKA_PLATFORM_NAME
- ": Unable to find the PCI bridge node\n");
- return;
- }
-
- bus_range = get_property(pcictrl, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int)) {
- printk(KERN_WARNING EFIKA_PLATFORM_NAME
- ": Can't get bus-range for %s\n", pcictrl->full_name);
- return;
- }
-
- if (bus_range[1] == bus_range[0])
- printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d",
- bus_range[0]);
- else
- printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d",
- bus_range[0], bus_range[1]);
- printk(" controlled by %s\n", pcictrl->full_name);
- printk("\n");
-
- hose = pcibios_alloc_controller();
- if (!hose) {
- printk(KERN_WARNING EFIKA_PLATFORM_NAME
- ": Can't allocate PCI controller structure for %s\n",
- pcictrl->full_name);
- return;
- }
-
- hose->arch_data = of_node_get(pcictrl);
- hose->first_busno = bus_range[0];
- hose->last_busno = bus_range[1];
- hose->ops = &rtas_pci_ops;
-
- pci_process_bridge_OF_ranges(hose, pcictrl, 0);
-}
-
-#else
-void __init efika_pcisetup(void)
-{}
-#endif
diff --git a/arch/powerpc/platforms/52xx/efika-setup.c b/arch/powerpc/platforms/52xx/efika-setup.c
deleted file mode 100644
index b6945cb..0000000
--- a/arch/powerpc/platforms/52xx/efika-setup.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *
- * Efika 5K2 platform setup
- * Some code really inspired from the lite5200b platform.
- *
- * Copyright (C) 2006 bplan GmbH
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/utsrelease.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/timer.h>
-#include <linux/pci.h>
-
-#include <asm/pgtable.h>
-#include <asm/prom.h>
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/rtas.h>
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
-#include <asm/mpc52xx.h>
-
-#include "efika.h"
-
-static void efika_show_cpuinfo(struct seq_file *m)
-{
- struct device_node *root;
- const char *revision = NULL;
- const char *codegendescription = NULL;
- const char *codegenvendor = NULL;
-
- root = of_find_node_by_path("/");
- if (!root)
- return;
-
- revision = get_property(root, "revision", NULL);
- codegendescription =
- get_property(root, "CODEGEN,description", NULL);
- codegenvendor = get_property(root, "CODEGEN,vendor", NULL);
-
- if (codegendescription)
- seq_printf(m, "machine\t\t: %s\n", codegendescription);
- else
- seq_printf(m, "machine\t\t: Efika\n");
-
- if (revision)
- seq_printf(m, "revision\t: %s\n", revision);
-
- if (codegenvendor)
- seq_printf(m, "vendor\t\t: %s\n", codegenvendor);
-
- of_node_put(root);
-}
-
-static void __init efika_setup_arch(void)
-{
- rtas_initialize();
-
-#ifdef CONFIG_BLK_DEV_INITRD
- initrd_below_start_ok = 1;
-
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
- ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
-
- efika_pcisetup();
-
- if (ppc_md.progress)
- ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0);
-}
-
-static int __init efika_probe(void)
-{
- char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
- "model", NULL);
-
- if (model == NULL)
- return 0;
- if (strcmp(model, "EFIKA5K2"))
- return 0;
-
- ISA_DMA_THRESHOLD = ~0L;
- DMA_MODE_READ = 0x44;
- DMA_MODE_WRITE = 0x48;
-
- return 1;
-}
-
-define_machine(efika)
-{
- .name = EFIKA_PLATFORM_NAME,
- .probe = efika_probe,
- .setup_arch = efika_setup_arch,
- .init = mpc52xx_declare_of_platform_devices,
- .show_cpuinfo = efika_show_cpuinfo,
- .init_IRQ = mpc52xx_init_irq,
- .get_irq = mpc52xx_get_irq,
- .restart = rtas_restart,
- .power_off = rtas_power_off,
- .halt = rtas_halt,
- .set_rtc_time = rtas_set_rtc_time,
- .get_rtc_time = rtas_get_rtc_time,
- .progress = rtas_progress,
- .get_boot_time = rtas_get_boot_time,
- .calibrate_decr = generic_calibrate_decr,
- .phys_mem_access_prot = pci_phys_mem_access_prot,
-};
diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c
new file mode 100644
index 0000000..8de0341
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/efika.c
@@ -0,0 +1,243 @@
+/*
+ * Efika 5K2 platform code
+ * Some code really inspired from the lite5200b platform.
+ *
+ * Copyright (C) 2006 bplan GmbH
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/utsrelease.h>
+#include <linux/seq_file.h>
+#include <linux/string.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/timer.h>
+#include <linux/pci.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/rtas.h>
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
+#include <asm/mpc52xx.h>
+
+
+#define EFIKA_PLATFORM_NAME "Efika"
+
+
+/* ------------------------------------------------------------------------ */
+/* PCI accesses thru RTAS */
+/* ------------------------------------------------------------------------ */
+
+#ifdef CONFIG_PCI
+
+/*
+ * Access functions for PCI config space using RTAS calls.
+ */
+static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 * val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
+ | (((bus->number - hose->first_busno) & 0xff) << 16)
+ | (hose->index << 24);
+ int ret = -1;
+ int rval;
+
+ rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len);
+ *val = ret;
+ return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static int rtas_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
+ | (((bus->number - hose->first_busno) & 0xff) << 16)
+ | (hose->index << 24);
+ int rval;
+
+ rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL,
+ addr, len, val);
+ return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops rtas_pci_ops = {
+ rtas_read_config,
+ rtas_write_config
+};
+
+
+void __init efika_pcisetup(void)
+{
+ const int *bus_range;
+ int len;
+ struct pci_controller *hose;
+ struct device_node *root;
+ struct device_node *pcictrl;
+
+ root = of_find_node_by_path("/");
+ if (root == NULL) {
+ printk(KERN_WARNING EFIKA_PLATFORM_NAME
+ ": Unable to find the root node\n");
+ return;
+ }
+
+ for (pcictrl = NULL;;) {
+ pcictrl = of_get_next_child(root, pcictrl);
+ if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0))
+ break;
+ }
+
+ of_node_put(root);
+
+ if (pcictrl == NULL) {
+ printk(KERN_WARNING EFIKA_PLATFORM_NAME
+ ": Unable to find the PCI bridge node\n");
+ return;
+ }
+
+ bus_range = get_property(pcictrl, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING EFIKA_PLATFORM_NAME
+ ": Can't get bus-range for %s\n", pcictrl->full_name);
+ return;
+ }
+
+ if (bus_range[1] == bus_range[0])
+ printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d",
+ bus_range[0]);
+ else
+ printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d",
+ bus_range[0], bus_range[1]);
+ printk(" controlled by %s\n", pcictrl->full_name);
+ printk("\n");
+
+ hose = pcibios_alloc_controller();
+ if (!hose) {
+ printk(KERN_WARNING EFIKA_PLATFORM_NAME
+ ": Can't allocate PCI controller structure for %s\n",
+ pcictrl->full_name);
+ return;
+ }
+
+ hose->arch_data = of_node_get(pcictrl);
+ hose->first_busno = bus_range[0];
+ hose->last_busno = bus_range[1];
+ hose->ops = &rtas_pci_ops;
+
+ pci_process_bridge_OF_ranges(hose, pcictrl, 0);
+}
+
+#else
+void __init efika_pcisetup(void)
+{}
+#endif
+
+
+
+/* ------------------------------------------------------------------------ */
+/* Platform setup */
+/* ------------------------------------------------------------------------ */
+
+static void efika_show_cpuinfo(struct seq_file *m)
+{
+ struct device_node *root;
+ const char *revision = NULL;
+ const char *codegendescription = NULL;
+ const char *codegenvendor = NULL;
+
+ root = of_find_node_by_path("/");
+ if (!root)
+ return;
+
+ revision = get_property(root, "revision", NULL);
+ codegendescription =
+ get_property(root, "CODEGEN,description", NULL);
+ codegenvendor = get_property(root, "CODEGEN,vendor", NULL);
+
+ if (codegendescription)
+ seq_printf(m, "machine\t\t: %s\n", codegendescription);
+ else
+ seq_printf(m, "machine\t\t: Efika\n");
+
+ if (revision)
+ seq_printf(m, "revision\t: %s\n", revision);
+
+ if (codegenvendor)
+ seq_printf(m, "vendor\t\t: %s\n", codegenvendor);
+
+ of_node_put(root);
+}
+
+static void __init efika_setup_arch(void)
+{
+ rtas_initialize();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ initrd_below_start_ok = 1;
+
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+ ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
+
+ efika_pcisetup();
+
+ if (ppc_md.progress)
+ ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0);
+}
+
+static int __init efika_probe(void)
+{
+ char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "model", NULL);
+
+ if (model == NULL)
+ return 0;
+ if (strcmp(model, "EFIKA5K2"))
+ return 0;
+
+ ISA_DMA_THRESHOLD = ~0L;
+ DMA_MODE_READ = 0x44;
+ DMA_MODE_WRITE = 0x48;
+
+ return 1;
+}
+
+define_machine(efika)
+{
+ .name = EFIKA_PLATFORM_NAME,
+ .probe = efika_probe,
+ .setup_arch = efika_setup_arch,
+ .init = mpc52xx_declare_of_platform_devices,
+ .show_cpuinfo = efika_show_cpuinfo,
+ .init_IRQ = mpc52xx_init_irq,
+ .get_irq = mpc52xx_get_irq,
+ .restart = rtas_restart,
+ .power_off = rtas_power_off,
+ .halt = rtas_halt,
+ .set_rtc_time = rtas_set_rtc_time,
+ .get_rtc_time = rtas_get_rtc_time,
+ .progress = rtas_progress,
+ .get_boot_time = rtas_get_boot_time,
+ .calibrate_decr = generic_calibrate_decr,
+ .phys_mem_access_prot = pci_phys_mem_access_prot,
+};
+
diff --git a/arch/powerpc/platforms/52xx/efika.h b/arch/powerpc/platforms/52xx/efika.h
deleted file mode 100644
index 2f060fd..0000000
--- a/arch/powerpc/platforms/52xx/efika.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Efika 5K2 platform setup - Header file
- *
- * Copyright (C) 2006 bplan GmbH
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-#ifndef __ARCH_POWERPC_EFIKA__
-#define __ARCH_POWERPC_EFIKA__
-
-#define EFIKA_PLATFORM_NAME "Efika"
-
-extern void __init efika_pcisetup(void);
-
-#endif
--
1.4.2
More information about the Linuxppc-dev
mailing list