[PATCH 19/19] bootwrapper: compatibility layer for old U-Boots (a.k.a. cuImage, cuboot)
Scott Wood
scottwood at freescale.com
Tue Feb 13 07:54:38 EST 2007
Add a bootwrapper platform (cuboot) that takes a bd_t from a legacy
U-Boot, and inserts data from it into a device tree which has been
compiled into the kernel. This should help ease the transition to
arch/powerpc in cases where U-Boot has not yet been updated to pass a
device tree, or where upgrading firmware isn't practical.
The device trees currently in the kernel tree must have
/chosen/linux,stdout-path added to work with cuboot.
The kernel command line, mac addresses, and various clocks will be filled
in based on the bd_t.
Signed-off-by: Scott Wood <scottwood at freescale.com>
---
This version of the patch calls fdtm_finalize rather than ft_finalize,
due to the change to patch 17. All other patches in the patchset are
the same as last time.
arch/powerpc/Kconfig | 21 +++++
arch/powerpc/boot/.gitignore | 2 +
arch/powerpc/boot/Makefile | 20 +++++-
arch/powerpc/boot/cuboot-83xx.c | 4 +
arch/powerpc/boot/cuboot-85xx.c | 4 +
arch/powerpc/boot/cuboot-86xx.c | 4 +
arch/powerpc/boot/cuboot.c | 160 +++++++++++++++++++++++++++++++++++++++
arch/powerpc/boot/ppcboot.h | 103 +++++++++++++++++++++++++
arch/powerpc/boot/wrapper | 41 ++++++++--
9 files changed, 349 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index aeb5309..f6e9b5e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -938,6 +938,27 @@ config SECCOMP
If unsure, say Y. Only embedded should say N here.
+config COMPAT_UIMAGE
+ bool "Build kernel for old non-device-tree PPCBoot/U-Boot"
+ depends on DEFAULT_UIMAGE
+ default n
+ help
+ If selected, the kernel will be built for older U-Boot
+ (and PPCBoot) bootloaders that pass a bd_t instead of
+ a device tree. Such a kernel will not work with a newer
+ U-Boot that passes the device tree itself. If your
+ U-Boot does not mention a device tree in "help bootm",
+ say Y.
+
+config CUIMAGE_DTS
+ string "Device tree source file"
+ depends on COMPAT_UIMAGE
+ help
+ This specifies the device tree source (.dts) file to
+ be compiled and included in the kernel image. If
+ a relative filename is given, then it will be relative
+ to arch/powerpc/boot/dts.
+
endmenu
config ISA_DMA_API
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 0734b2f..ff8852d 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -18,6 +18,8 @@ kernel-vmlinux.strip.c
kernel-vmlinux.strip.gz
mktree
uImage
+uImage.bin.gz
+uImage.elf
zImage
zImage.chrp
zImage.coff
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 51a0fd5..94eca3e 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -35,6 +35,8 @@ endif
BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj)
+cuboot-plats := 83xx 85xx 86xx
+
zlib := inffast.c inflate.c inftrees.c
zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
zliblinuxheader := zlib.h zconf.h zutil.h
@@ -45,7 +47,7 @@ $(addprefix $(obj)/,$(zlib) main.o): $(a
src-wlib := string.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
ns16550.c serial.c simple_alloc.c div64.S util.S $(zlib) \
devtree.c
-src-plat := of.c
+src-plat := of.c $(cuboot-plats:%=cuboot-%.c)
src-boot := crt0.S $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -122,6 +124,12 @@ quiet_cmd_wrap_initrd = WRAP $@
cmd_wrap_initrd =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \
-i $(obj)/ramdisk.image.gz vmlinux
+dts = $(if $(shell echo $(CONFIG_CUIMAGE_DTS) | grep '^/'),\
+ ,$(srctree)/$(src)/dts/)$(CONFIG_CUIMAGE_DTS)
+quiet_cmd_wrap_dt = WRAP $@
+ cmd_wrap_dt = $(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \
+ -s "$(dts)" vmlinux
+
$(obj)/zImage.chrp: vmlinux $(wrapperbits)
$(call cmd,wrap,chrp)
@@ -158,8 +166,18 @@ $(obj)/zImage.ps3: vmlinux
$(obj)/zImage.initrd.ps3: vmlinux
@echo " WARNING zImage.initrd.ps3 not supported (yet)"
+ifeq ($(CONFIG_COMPAT_UIMAGE),y)
+cuboot-plat-$(CONFIG_83xx) += 83xx
+cuboot-plat-$(CONFIG_85xx) += 85xx
+cuboot-plat-$(CONFIG_86xx) += 86xx
+cuboot-plat-y += unknown-platform
+
+$(obj)/uImage: vmlinux $(wrapperbits)
+ $(call cmd,wrap_dt,cuboot-$(word 1,$(cuboot-plat-y)))
+else
$(obj)/uImage: vmlinux $(wrapperbits)
$(call cmd,wrap,uboot)
+endif
image-$(CONFIG_PPC_PSERIES) += zImage.pseries
image-$(CONFIG_PPC_MAPLE) += zImage.pseries
diff --git a/arch/powerpc/boot/cuboot-83xx.c b/arch/powerpc/boot/cuboot-83xx.c
new file mode 100644
index 0000000..6563dcc
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-83xx.c
@@ -0,0 +1,4 @@
+#define CONFIG_83xx
+#define CONFIG_6xx
+
+#include "cuboot.c"
diff --git a/arch/powerpc/boot/cuboot-85xx.c b/arch/powerpc/boot/cuboot-85xx.c
new file mode 100644
index 0000000..16f33e1
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-85xx.c
@@ -0,0 +1,4 @@
+#define CONFIG_85xx
+#define CONFIG_E500
+
+#include "cuboot.c"
diff --git a/arch/powerpc/boot/cuboot-86xx.c b/arch/powerpc/boot/cuboot-86xx.c
new file mode 100644
index 0000000..e9cca26
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-86xx.c
@@ -0,0 +1,4 @@
+#define CONFIG_86xx
+#define CONFIG_6xx
+
+#include "cuboot.c"
diff --git a/arch/powerpc/boot/cuboot.c b/arch/powerpc/boot/cuboot.c
new file mode 100644
index 0000000..e63d983
--- /dev/null
+++ b/arch/powerpc/boot/cuboot.c
@@ -0,0 +1,160 @@
+/*
+ * Compatibility with old U-Boots
+ *
+ * Author: Scott Wood <scottwood at freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "flatdevtree.h"
+#include "ppcboot.h"
+
+static bd_t bd;
+extern char _start[], _end[];
+
+static void set_memory(void)
+{
+ void *devp;
+ unsigned long mem[2] = { bd.bi_memstart, bd.bi_memsize };
+
+ devp = finddevice("/memory");
+ if (!devp) {
+ devp = create_node(NULL, "memory");
+ setprop_str(devp, "device_type", "memory");
+ }
+
+ setprop(devp, "reg", mem, sizeof(mem));
+}
+
+static void set_bootargs(unsigned long cmdline_start,
+ unsigned long cmdline_size)
+{
+ void *devp;
+
+ devp = finddevice("/chosen");
+ if (!devp)
+ devp = create_node(NULL, "chosen");
+
+ setprop(devp, "bootargs", (void *)cmdline_start, cmdline_size);
+}
+
+static void *set_one_mac(void *last_node, unsigned char *addr)
+{
+ void *node = find_node_by_prop_value_str(last_node, "device_type",
+ "network");
+
+ if (node)
+ setprop(node, "local-mac-address", addr, 6);
+
+ return node;
+}
+
+static void set_mac_addrs(void)
+{
+ __attribute__((unused)) void *node =
+ set_one_mac(NULL, bd.bi_enetaddr);
+
+#ifdef HAVE_ENET1ADDR
+ if (node)
+ node = set_one_mac(node, bd.bi_enet1addr);
+#endif
+#ifdef HAVE_ENET2ADDR
+ if (node)
+ node = set_one_mac(node, bd.bi_enet2addr);
+#endif
+#ifdef HAVE_ENET3ADDR
+ if (node)
+ node = set_one_mac(node, bd.bi_enet3addr);
+#endif
+}
+
+static void set_clocks(void)
+{
+ void *node = NULL;
+
+ while ((node = find_node_by_prop_value_str(node, "device_type",
+ "cpu"))) {
+ unsigned long tbfreq;
+
+ setprop(node, "clock-frequency", &bd.bi_intfreq,
+ sizeof(bd.bi_intfreq));
+ setprop(node, "bus-frequency", &bd.bi_busfreq,
+ sizeof(bd.bi_busfreq));
+
+#ifdef CONFIG_6xx
+ tbfreq = bd.bi_busfreq / 4;
+#elif defined(CONFIG_E500)
+ tbfreq = bd.bi_busfreq / 8;
+#else
+#error Unknown timebase frequency.
+#endif
+
+ setprop(node, "timebase-frequency", &tbfreq, sizeof(tbfreq));
+ }
+
+#if defined(CONFIG_83xx) || defined(CONFIG_85xx) || defined(CONFIG_86xx)
+ node = find_node_by_prop_value_str(NULL, "device_type", "soc");
+ if (node) {
+ void *serial;
+
+ setprop(node, "bus-frequency", &bd.bi_busfreq,
+ sizeof(bd.bi_busfreq));
+
+ serial = finddevice_rel(node, "serial at 4500");
+ if (serial)
+ setprop(serial, "clock-frequency", &bd.bi_busfreq,
+ sizeof(bd.bi_busfreq));
+
+ serial = finddevice_rel(node, "serial at 4600");
+ if (serial)
+ setprop(serial, "clock-frequency", &bd.bi_busfreq,
+ sizeof(bd.bi_busfreq));
+ }
+#endif
+}
+
+/* There's not enough room on 8MiB boards to put the full
+ * heap (including a kernel image) after _end, but the device
+ * tree cannot stay in a heap that is before _start, or it
+ * will get overwritten when the kernel relocates itself.
+ *
+ * Ideally, we wouldn't move the kernel at all if not uncompressing,
+ * but that requires making sure all platforms leave enough room
+ * after _end for the BSS when setting up the heap.
+ */
+static unsigned long cuboot_finalize(void)
+{
+ struct boot_param_header *dt =
+ (struct boot_param_header *)fdtm_finalize();
+
+ memcpy(_end, dt, dt->totalsize);
+ return (unsigned long)_end;
+}
+
+int platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7,
+ char *dt_blob_start, char *dt_blob_end)
+{
+ memcpy(&bd, (bd_t *)r3, sizeof(bd));
+ initrd.addr = r4;
+ initrd.size = r4 ? r5 : 0;
+
+ if (simple_alloc_init(0, (unsigned long)_start - 0x80000, 4096, 32) >
+ (void *)_start)
+ return -1;
+ if (ft_init(dt_blob_start, dt_blob_end - dt_blob_start, 32))
+ return -1;
+
+ set_memory();
+ set_bootargs(r6, r7 - r6 + 1);
+ set_mac_addrs();
+ set_clocks();
+
+ dt_ops.finalize = cuboot_finalize;
+ return serial_console_init();
+}
diff --git a/arch/powerpc/boot/ppcboot.h b/arch/powerpc/boot/ppcboot.h
new file mode 100644
index 0000000..d9782ae
--- /dev/null
+++ b/arch/powerpc/boot/ppcboot.h
@@ -0,0 +1,103 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __PPCBOOT_H__
+#define __PPCBOOT_H__
+
+/*
+ * Board information passed to kernel from PPCBoot
+ *
+ * include/asm-ppc/ppcboot.h
+ */
+
+#include "types.h"
+
+typedef struct bd_info {
+ unsigned long bi_memstart; /* start of DRAM memory */
+ unsigned long bi_memsize; /* size of DRAM memory in bytes */
+ unsigned long bi_flashstart; /* start of FLASH memory */
+ unsigned long bi_flashsize; /* size of FLASH memory */
+ unsigned long bi_flashoffset; /* reserved area for startup monitor */
+ unsigned long bi_sramstart; /* start of SRAM memory */
+ unsigned long bi_sramsize; /* size of SRAM memory */
+#if defined(CONFIG_8xx) || defined(CONFIG_CPM2) || defined(CONFIG_85xx) ||\
+ defined(CONFIG_83xx)
+ unsigned long bi_immr_base; /* base of IMMR register */
+#endif
+#if defined(CONFIG_PPC_MPC52xx)
+ unsigned long bi_mbar_base; /* base of internal registers */
+#endif
+ unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
+ unsigned long bi_ip_addr; /* IP Address */
+ unsigned char bi_enetaddr[6]; /* Ethernet address */
+ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
+ unsigned long bi_intfreq; /* Internal Freq, in MHz */
+ unsigned long bi_busfreq; /* Bus Freq, in MHz */
+#if defined(CONFIG_CPM2)
+ unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */
+ unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */
+ unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */
+ unsigned long bi_vco; /* VCO Out from PLL, in MHz */
+#endif
+#if defined(CONFIG_PPC_MPC52xx)
+ unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */
+ unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
+#endif
+ unsigned long bi_baudrate; /* Console Baudrate */
+#if defined(CONFIG_4xx)
+ unsigned char bi_s_version[4]; /* Version of this structure */
+ unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */
+ unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */
+ unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */
+ unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
+ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
+#endif
+#if defined(CONFIG_HYMOD)
+ hymod_conf_t bi_hymod_conf; /* hymod configuration information */
+#endif
+#if defined(CONFIG_EVB64260) || defined(CONFIG_405EP) || defined(CONFIG_44x) || \
+ defined(CONFIG_85xx) || defined(CONFIG_83xx)
+ /* second onboard ethernet port */
+ unsigned char bi_enet1addr[6];
+#define HAVE_ENET1ADDR
+#endif
+#if defined(CONFIG_EVB64260) || defined(CONFIG_440GX) || defined(CONFIG_85xx)
+ /* third onboard ethernet ports */
+ unsigned char bi_enet2addr[6];
+#define HAVE_ENET2ADDR
+#endif
+#if defined(CONFIG_440GX)
+ /* fourth onboard ethernet ports */
+ unsigned char bi_enet3addr[6];
+#define HAVE_ENET3ADDR
+#endif
+#if defined(CONFIG_4xx)
+ unsigned int bi_opbfreq; /* OB clock in Hz */
+ int bi_iic_fast[2]; /* Use fast i2c mode */
+#endif
+#if defined(CONFIG_440GX)
+ int bi_phynum[4]; /* phy mapping */
+ int bi_phymode[4]; /* phy mode */
+#endif
+} bd_t;
+
+#define bi_tbfreq bi_intfreq
+
+#endif /* __PPCBOOT_H__ */
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 024e4d4..f7458c1 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -29,6 +29,7 @@ initrd=
dtb=
dts=
cacheit=
+gzip=.gz
# cross-compilation prefix
CROSS=
@@ -106,7 +107,7 @@ if [ -n "$dts" ]; then
if [ -z "$dtb" ]; then
dtb="$platform.dtb"
fi
- dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts" || exit 1
+ dtc -f -O dtb -o "$dtb" -b 0 -V 16 "$dts" || exit 1
fi
if [ -z "$kernel" ]; then
@@ -137,31 +138,46 @@ miboot|uboot)
ksection=image
isection=initrd
;;
+cuboot*)
+ platformo=$object/"$platform".o
+ gzip=
+ ;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
if [ -z "$cacheit" -o ! -f "$vmz.gz" -o "$vmz.gz" -ot "$kernel" ]; then
${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
- gzip -f -9 "$vmz.$$"
+
+ if [ -n "$gzip" ]; then
+ gzip -f -9 "$vmz.$$"
+ fi
+
if [ -n "$cacheit" ]; then
- mv -f "$vmz.$$.gz" "$vmz.gz"
+ mv -f "$vmz.$$$gzip" "$vmz$gzip"
else
vmz="$vmz.$$"
fi
fi
+vmz="$vmz$gzip"
+
case "$platform" in
-uboot)
- rm -f "$ofile"
+uboot|cuboot*)
version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \
cut -d' ' -f3`
if [ -n "$version" ]; then
version="-n Linux-$version"
fi
+ ;;
+esac
+
+case "$platform" in
+uboot)
+ rm -f "$ofile"
mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \
- $version -d "$vmz.gz" "$ofile"
+ $version -d "$vmz" "$ofile"
if [ -z "$cacheit" ]; then
- rm -f $vmz.gz
+ rm -f $vmz
fi
exit 0
;;
@@ -173,9 +189,9 @@ addsec() {
--set-section-flags=$3=contents,alloc,load,readonly,data
}
-addsec $tmp "$vmz.gz" $ksection $object/empty.o
+addsec $tmp "$vmz" $ksection $object/empty.o
if [ -z "$cacheit" ]; then
- rm -f "$vmz.gz"
+ rm -f "$vmz"
fi
if [ -n "$initrd" ]; then
@@ -204,4 +220,11 @@ pmaccoff)
${CROSS}objcopy -O aixcoff-rs6000 --set-start 0x500000 "$ofile"
$object/hack-coff "$ofile"
;;
+cuboot*)
+ mv "$ofile" "$ofile".elf
+ ${CROSS}objcopy -O binary "$ofile".elf "$ofile".bin
+ gzip -f -9 "$ofile".bin
+ mkimage -A ppc -O linux -T kernel -C gzip -a 00400000 -e 00400010 \
+ $version -d "$ofile".bin.gz "$ofile"
+ ;;
esac
--
1.4.4
More information about the Linuxppc-dev
mailing list