[PATCH 6/10] ps3: Preallocate bootmem memory for ps3fb
Geert Uytterhoeven
Geert.Uytterhoeven at sonycom.com
Fri Feb 9 00:59:22 EST 2007
Preallocate bootmem memory for the PS3 frame buffer device, which needs a
large block of physically-contiguous memory. The size of this memory block is
configurable:
- The config option CONFIG_FB_PS3_DEFAULT_SIZE_M allows to specify the
default amount of memory (in MiB) allocated to the virtual frame buffer.
- The early boot parameter `ps3fb=xxx' allows to override the default value.
It will be rounded up to a multiple of 1 MiB, if needed.
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven at sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand at am.sony.com>
---
arch/powerpc/platforms/ps3/setup.c | 42 +++++++++++++++++++++++++++++++++++++
include/asm-powerpc/ps3.h | 9 +++++++
2 files changed, 51 insertions(+)
--- ps3-linux-2.6.20.orig/arch/powerpc/platforms/ps3/setup.c
+++ ps3-linux-2.6.20/arch/powerpc/platforms/ps3/setup.c
@@ -24,6 +24,7 @@
#include <linux/root_dev.h>
#include <linux/console.h>
#include <linux/kexec.h>
+#include <linux/bootmem.h>
#include <asm/machdep.h>
#include <asm/firmware.h>
@@ -72,6 +73,46 @@ static void ps3_panic(char *str)
for (;;) ;
}
+
+static void prealloc(struct ps3_prealloc *p)
+{
+ if (!p->size)
+ return;
+
+ p->address = __alloc_bootmem(p->size, p->align, __pa(MAX_DMA_ADDRESS));
+ if (!p->address) {
+ printk(KERN_ERR "%s: Cannot allocate %s\n", __FUNCTION__,
+ p->name);
+ return;
+ }
+
+ printk(KERN_INFO "%s: %lu bytes at %p\n", p->name, p->size,
+ p->address);
+}
+
+#ifdef CONFIG_FB_PS3
+struct ps3_prealloc ps3fb_videomemory = {
+ .name = "ps3fb videomemory",
+ .size = CONFIG_FB_PS3_DEFAULT_SIZE_M*1024*1024,
+ .align = 1024*1024 /* the GPU requires 1 MiB alignment */
+};
+#define prealloc_ps3fb_videomemory() prealloc(&ps3fb_videomemory)
+
+static int __init early_parse_ps3fb(char *p)
+{
+ if (!p)
+ return 1;
+
+ ps3fb_videomemory.size = _ALIGN_UP(memparse(p, &p),
+ ps3fb_videomemory.align);
+ return 0;
+}
+early_param("ps3fb", early_parse_ps3fb);
+#else
+#define prealloc_ps3fb_videomemory() do { } while (0)
+#endif
+
+
static void __init ps3_setup_arch(void)
{
DBG(" -> %s:%d\n", __func__, __LINE__);
@@ -87,6 +128,7 @@ static void __init ps3_setup_arch(void)
conswitchp = &dummy_con;
#endif
+ prealloc_ps3fb_videomemory();
ppc_md.power_save = ps3_power_save;
DBG(" <- %s:%d\n", __func__, __LINE__);
--- ps3-linux-2.6.20.orig/include/asm-powerpc/ps3.h
+++ ps3-linux-2.6.20/include/asm-powerpc/ps3.h
@@ -459,4 +459,13 @@ static inline void *ps3_system_bus_get_d
extern struct bus_type ps3_system_bus_type;
+struct ps3_prealloc {
+ const char *name;
+ void *address;
+ unsigned long size;
+ unsigned long align;
+};
+
+extern struct ps3_prealloc ps3fb_videomemory;
+
#endif
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- Sony Network and Software Technology Center Europe (NSCE)
Geert.Uytterhoeven at sonycom.com ------- The Corporate Village, Da Vincilaan 7-D1
Voice +32-2-7008453 Fax +32-2-7008622 ---------------- B-1935 Zaventem, Belgium
More information about the Linuxppc-dev
mailing list