[PATCH] Add base support for the MPC8313E RDB

[Kim Phillips]

On Wed, 7 Feb 2007 17:36:34 -0600
Kumar Gala <galak at kernel.crashing.org> wrote:

> 
> On Feb 7, 2007, at 5:06 PM, Kim Phillips wrote:
> 
> > Add support for the MPC8313E Reference Development Board (RDB).
> > Includes dts.
> 
> Can you give some better description about the RDB, like what  
> functionality it supports, etc..

I'll respin with the details..

> 
> > +	soc8313 at e0000000 {
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> > +		#interrupt-cells = <2>;
> > +		device_type = "soc";
> > +		ranges = <0 e0000000 00100000>;
> > +		reg = <e0000000 00000200>;
> > +		bus-frequency = <0>;
> > +		compatible = "mpc8313\0mpc831x\0mpc83xx";
> 
> I'm not sure what this compatible property is suppose to mean?
> 

it was the part of Scott's "ioremap the entire IMMR" patch you acked.  I'll take it out for now, since it should really be a part of that patch.

> > +		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
> > +		usb at 23000 {
> > +			device_type = "usb";
> > +			compatible = "fsl-usb2-dr";
> > +			reg = <23000 1000>;
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			interrupt-parent = <700>;
> > +			interrupts = <26 2>;
> > +			phy_type = "utmi_wide";
> 
> Does anything change because of the integrated UTMI phy?
> 
yes, it's..

> > +			control_init  = <00000280>; // UTMI ext 48 MHz clk
> 
> What is 'control_init' ?
> 

..which selects and enables the UTMI phy interface options.

> > +
> > +		ethernet at 24000 {
> > +			device_type = "network";
> > +			model = "TSEC";
> 
> isn't eTSEC on 8313?
> 
quite right, I'll change it.

Thanks,

Kim