[PATCH] Assign all PCI busses on G3 Blue & White

[Benjamin Herrenschmidt]

On Sun, 2007-02-04 at 03:16 -0500, Pavel Roskin wrote:
> From: Pavel Roskin <proski at gnu.org>
> 
> G3 Blue & White is misconfigured by default so that CardBus controllers
> in PCI slots don't work.  The PCI bridge is programmed to only allow
> access to bus 1 but not higher busses.
> 
> The patch forces the PCI busses to be reassigned if a Grackle controller
> is found and the machine identifies itself as "PowerMac1,1"
> 
> Signed-off-by: Pavel Roskin <proski at gnu.org>

Acked-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>

> ---
> My previous attempt to fix this bug can be found in this thread:
> http://ozlabs.org/pipermail/linuxppc-dev/2004-May/thread.html#17056
> The new patch relies on the existing common PCI code and doesn't poke
> bridge registers itself.  It would even do the right thing if a PCI or
> CardBus bridge is inserted into the upper slot reserved for video cards
> and connected directly to bus 0.
> ---
> 
>  arch/powerpc/sysdev/grackle.c |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/powerpc/sysdev/grackle.c b/arch/powerpc/sysdev/grackle.c
> index b6ec793..4205362 100644
> --- a/arch/powerpc/sysdev/grackle.c
> +++ b/arch/powerpc/sysdev/grackle.c
> @@ -56,6 +56,8 @@ static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable)
>  void __init setup_grackle(struct pci_controller *hose)
>  {
>  	setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
> +	if (machine_is_compatible("PowerMac1,1"))
> +		pci_assign_all_buses = 1;
>  	if (machine_is_compatible("AAPL,PowerBook1998"))
>  		grackle_set_loop_snoop(hose, 1);
>  #if 0	/* Disabled for now, HW problems ??? */
> 
>