[PATCH 4/9] cpm2: Add cpm2_set_pin().
Scott Wood
scottwood at freescale.com
Wed Aug 29 06:19:24 EST 2007
This provides a generic way for board code to set up CPM pins, rather
than directly poking magic values into registers.
Signed-off-by: Scott Wood <scottwood at freescale.com>
---
arch/powerpc/sysdev/cpm2_common.c | 33 +++++++++++++++++++++++++++++++++
include/asm-powerpc/cpm2.h | 9 +++++++++
2 files changed, 42 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c
index 549da4b..b8460c0 100644
--- a/arch/powerpc/sysdev/cpm2_common.c
+++ b/arch/powerpc/sysdev/cpm2_common.c
@@ -418,3 +418,36 @@ void *cpm_dpram_addr(unsigned long offset)
return (void __force *)(im_dprambase + offset);
}
EXPORT_SYMBOL(cpm_dpram_addr);
+
+struct cpm2_ioports {
+ u32 dir, par, sor, odr, dat;
+ u32 res[3];
+};
+
+void cpm2_set_pin(int port, int pin, int flags)
+{
+ struct cpm2_ioports __iomem *iop =
+ (struct cpm2_ioports __iomem *)&cpm2_immr->im_ioport;
+
+ pin = 1 << (31 - pin);
+
+ if (flags & CPM_PIN_OUTPUT)
+ setbits32(&iop[port].dir, pin);
+ else
+ clrbits32(&iop[port].dir, pin);
+
+ if (!(flags & CPM_PIN_GPIO))
+ setbits32(&iop[port].par, pin);
+ else
+ clrbits32(&iop[port].par, pin);
+
+ if (flags & CPM_PIN_SECONDARY)
+ setbits32(&iop[port].sor, pin);
+ else
+ clrbits32(&iop[port].sor, pin);
+
+ if (flags & CPM_PIN_OPENDRAIN)
+ setbits32(&iop[port].odr, pin);
+ else
+ clrbits32(&iop[port].odr, pin);
+}
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index 41a45db..d7b57ac 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -1247,5 +1247,14 @@ enum cpm_clk {
extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock);
+#define CPM_PIN_INPUT 0
+#define CPM_PIN_OUTPUT 1
+#define CPM_PIN_PRIMARY 0
+#define CPM_PIN_SECONDARY 2
+#define CPM_PIN_GPIO 4
+#define CPM_PIN_OPENDRAIN 8
+
+void cpm2_set_pin(int port, int pin, int flags);
+
#endif /* __CPM2__ */
#endif /* __KERNEL__ */
--
1.5.0.3
More information about the Linuxppc-dev
mailing list