[PATCH 1/4] PowerPC 440EPx: Sequoia bootwrapper
Valentine Barshak
vbarshak at ru.mvista.com
Wed Aug 29 02:56:10 EST 2007
Bootwrapper code for AMCC PPC440EPx Sequoia.
Signed-off-by: Valentine Barshak <vbarshak at ru.mvista.com>
---
arch/powerpc/boot/4xx.c | 108 +++++++++++++++++++++++++++++++++++++
arch/powerpc/boot/4xx.h | 1
arch/powerpc/boot/Makefile | 4 +
arch/powerpc/boot/cuboot-sequoia.c | 67 ++++++++++++++++++++++
4 files changed, 179 insertions(+), 1 deletion(-)
diff -ruN linux-2.6.orig/arch/powerpc/boot/4xx.c linux-2.6/arch/powerpc/boot/4xx.c
--- linux-2.6.orig/arch/powerpc/boot/4xx.c 2007-08-27 14:08:42.000000000 +0400
+++ linux-2.6/arch/powerpc/boot/4xx.c 2007-08-28 17:04:51.000000000 +0400
@@ -39,6 +39,114 @@
dt_fixup_memory(0, memsize);
}
+/* 4xx DDR1/2 Denali memory controller support */
+/* DDR0 registers */
+#define DDR0_02 2
+#define DDR0_08 8
+#define DDR0_10 10
+#define DDR0_14 14
+#define DDR0_42 42
+#define DDR0_43 43
+
+/* DDR0_02 */
+#define DDR_START 0x1
+#define DDR_START_SHIFT 0
+#define DDR_MAX_CS_REG 0x3
+#define DDR_MAX_CS_REG_SHIFT 24
+#define DDR_MAX_COL_REG 0xf
+#define DDR_MAX_COL_REG_SHIFT 16
+#define DDR_MAX_ROW_REG 0xf
+#define DDR_MAX_ROW_REG_SHIFT 8
+/* DDR0_08 */
+#define DDR_DDR2_MODE 0x1
+#define DDR_DDR2_MODE_SHIFT 0
+/* DDR0_10 */
+#define DDR_CS_MAP 0x3
+#define DDR_CS_MAP_SHIFT 8
+/* DDR0_14 */
+#define DDR_REDUC 0x1
+#define DDR_REDUC_SHIFT 16
+/* DDR0_42 */
+#define DDR_APIN 0x7
+#define DDR_APIN_SHIFT 24
+/* DDR0_43 */
+#define DDR_COL_SZ 0x7
+#define DDR_COL_SZ_SHIFT 8
+#define DDR_BANK8 0x1
+#define DDR_BANK8_SHIFT 0
+
+#define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask))
+
+static inline u32 mfdcr_sdram0(u32 reg)
+{
+ mtdcr(DCRN_SDRAM0_CFGADDR, reg);
+ return mfdcr(DCRN_SDRAM0_CFGDATA);
+}
+
+void ibm4xx_denali_fixup_memsize(void)
+{
+ u32 val, max_cs, max_col, max_row;
+ u32 cs, col, row, bank, dpath;
+ unsigned long memsize;
+
+ val = mfdcr_sdram0(DDR0_02);
+ if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
+ fatal("DDR controller is not initialized\n");
+
+ /* get maximum cs col and row values */
+ max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
+ max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
+ max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
+
+ /* get CS value */
+ val = mfdcr_sdram0(DDR0_10);
+
+ val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT);
+ cs = 0;
+ while (val) {
+ if (val && 0x1)
+ cs++;
+ val = val >> 1;
+ }
+
+ if (!cs)
+ fatal("No memory installed\n");
+ if (cs > max_cs)
+ fatal("DDR wrong CS configuration\n");
+
+ /* get data path bytes */
+ val = mfdcr_sdram0(DDR0_14);
+
+ if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT))
+ dpath = 8; /* 64 bits */
+ else
+ dpath = 4; /* 32 bits */
+
+ /* get adress pins (rows) */
+ val = mfdcr_sdram0(DDR0_42);
+
+ row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT);
+ if (row > max_row)
+ fatal("DDR wrong APIN configuration\n");
+ row = max_row - row;
+
+ /* get collomn size and banks */
+ val = mfdcr_sdram0(DDR0_43);
+
+ col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT);
+ if (col > max_col)
+ fatal("DDR wrong COL configuration\n");
+ col = max_col - col;
+
+ if (DDR_GET_VAL(val, DDR_BANK8, DDR_BANK8_SHIFT))
+ bank = 8; /* 8 banks */
+ else
+ bank = 4; /* 4 banks */
+
+ memsize = cs * (1 << (col+row)) * bank * dpath;
+ dt_fixup_memory(0, memsize);
+}
+
#define SPRN_DBCR0_40X 0x3F2
#define SPRN_DBCR0_44X 0x134
#define DBCR0_RST_SYSTEM 0x30000000
diff -ruN linux-2.6.orig/arch/powerpc/boot/4xx.h linux-2.6/arch/powerpc/boot/4xx.h
--- linux-2.6.orig/arch/powerpc/boot/4xx.h 2007-08-27 14:08:42.000000000 +0400
+++ linux-2.6/arch/powerpc/boot/4xx.h 2007-08-28 17:04:51.000000000 +0400
@@ -12,6 +12,7 @@
#define _POWERPC_BOOT_4XX_H_
void ibm4xx_fixup_memsize(void);
+void ibm4xx_denali_fixup_memsize(void);
void ibm44x_dbcr_reset(void);
void ibm40x_dbcr_reset(void);
void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1);
diff -ruN linux-2.6.orig/arch/powerpc/boot/cuboot-sequoia.c linux-2.6/arch/powerpc/boot/cuboot-sequoia.c
--- linux-2.6.orig/arch/powerpc/boot/cuboot-sequoia.c 1970-01-01 03:00:00.000000000 +0300
+++ linux-2.6/arch/powerpc/boot/cuboot-sequoia.c 2007-08-28 17:21:55.000000000 +0400
@@ -0,0 +1,67 @@
+/*
+ * Old U-boot compatibility for Sequoia
+ *
+ * Valentine Barshak <vbarshak at ru.mvista.com>
+ * Copyright 2007 MontaVista Software, Inc
+ *
+ * Based on Ebony code by David Gibson <david at gibson.dropbear.id.au>
+ * Copyright IBM Corporation, 2007
+ *
+ * Based on Bamboo code by Josh Boyer <jwboyer at linux.vnet.ibm.com>
+ * Copyright IBM Corporation, 2007
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the License
+ */
+
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+static u8 *sequoia_mac0, *sequoia_mac1;
+
+extern char _dtb_start[];
+extern char _dtb_end[];
+
+
+static void sequoia_fixups(void)
+{
+ unsigned long sysclk = 33333333;
+
+ ibm440ep_fixup_clocks(sysclk, 11059200);
+ ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+ ibm4xx_denali_fixup_memsize();
+ dt_fixup_mac_addresses(sequoia_mac0, sequoia_mac1);
+}
+
+static void sequoia_init(void *mac0, void *mac1)
+{
+ platform_ops.fixups = sequoia_fixups;
+ platform_ops.exit = ibm44x_dbcr_reset;
+ sequoia_mac0 = mac0;
+ sequoia_mac1 = mac1;
+ ft_init(_dtb_start, 0, 32);
+ serial_console_init();
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ CUBOOT_INIT();
+ sequoia_init(&bd.bi_enetaddr, &bd.bi_enet1addr);
+}
diff -ruN linux-2.6.orig/arch/powerpc/boot/Makefile linux-2.6/arch/powerpc/boot/Makefile
--- linux-2.6.orig/arch/powerpc/boot/Makefile 2007-08-27 14:08:42.000000000 +0400
+++ linux-2.6/arch/powerpc/boot/Makefile 2007-08-28 17:28:06.000000000 +0400
@@ -48,7 +48,8 @@
cpm-serial.c
src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \
cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
- ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c cuboot-pq2.c
+ ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
+ cuboot-pq2.c cuboot-sequoia.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -146,6 +147,7 @@
image-$(CONFIG_PPC_85xx) += cuImage.85xx
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
image-$(CONFIG_BAMBOO) += treeImage.bamboo
+image-$(CONFIG_SEQUOIA) += cuImage.sequoia
endif
# For 32-bit powermacs, build the COFF and miboot images
More information about the Linuxppc-dev
mailing list