[PATCH 1/4] [POWERPC] Move iSeries startup code out of head_64.S
Stephen Rothwell
sfr at canb.auug.org.au
Tue Aug 21 14:42:22 EST 2007
Signed-off-by: Stephen Rothwell <sfr at canb.auug.org.au>
---
arch/powerpc/kernel/head_64.S | 86 +-----------------------
arch/powerpc/platforms/iseries/Makefile | 1 +
arch/powerpc/platforms/iseries/head.S | 114 +++++++++++++++++++++++++++++++
include/asm-powerpc/ppc_asm.h | 14 ++++
4 files changed, 131 insertions(+), 84 deletions(-)
create mode 100644 arch/powerpc/platforms/iseries/head.S
Built for iseries_defconfig, pseries_defconfig, ppc64_defconfig,
allmodconfig and booted on iSeries 270 for iseries_defconfig and
ppc64_defconfig.
--
Cheers,
Stephen Rothwell sfr at canb.auug.org.au
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 1e6d9cc..97f089b 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -802,56 +802,6 @@ system_call_iSeries:
STD_EXCEPTION_ISERIES( 0xe00, trap_0e, PACA_EXGEN)
STD_EXCEPTION_ISERIES( 0xf00, performance_monitor, PACA_EXGEN)
- .globl system_reset_iSeries
-system_reset_iSeries:
- mfspr r13,SPRN_SPRG3 /* Get paca address */
- mfmsr r24
- ori r24,r24,MSR_RI
- mtmsrd r24 /* RI on */
- lhz r24,PACAPACAINDEX(r13) /* Get processor # */
- cmpwi 0,r24,0 /* Are we processor 0? */
- bne 1f
- b .__start_initialization_iSeries /* Start up the first processor */
-1: mfspr r4,SPRN_CTRLF
- li r5,CTRL_RUNLATCH /* Turn off the run light */
- andc r4,r4,r5
- mtspr SPRN_CTRLT,r4
-
-1:
- HMT_LOW
-#ifdef CONFIG_SMP
- lbz r23,PACAPROCSTART(r13) /* Test if this processor
- * should start */
- sync
- LOAD_REG_IMMEDIATE(r3,current_set)
- sldi r28,r24,3 /* get current_set[cpu#] */
- ldx r3,r3,r28
- addi r1,r3,THREAD_SIZE
- subi r1,r1,STACK_FRAME_OVERHEAD
-
- cmpwi 0,r23,0
- beq iSeries_secondary_smp_loop /* Loop until told to go */
- bne __secondary_start /* Loop until told to go */
-iSeries_secondary_smp_loop:
- /* Let the Hypervisor know we are alive */
- /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
- lis r3,0x8002
- rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */
-#else /* CONFIG_SMP */
- /* Yield the processor. This is required for non-SMP kernels
- which are running on multi-threaded machines. */
- lis r3,0x8000
- rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */
- addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */
- li r4,0 /* "yield timed" */
- li r5,-1 /* "yield forever" */
-#endif /* CONFIG_SMP */
- li r0,-1 /* r0=-1 indicates a Hypervisor call */
- sc /* Invoke the hypervisor via a system call */
- mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */
- b 1b /* If SMP not configured, secondaries
- * loop forever */
-
decrementer_iSeries_masked:
/* We may not have a valid TOC pointer in here. */
li r11,1
@@ -1622,39 +1572,6 @@ _GLOBAL(generic_secondary_smp_init)
b __secondary_start
#endif
-#ifdef CONFIG_PPC_ISERIES
-_INIT_STATIC(__start_initialization_iSeries)
- /* Clear out the BSS */
- LOAD_REG_IMMEDIATE(r11,__bss_stop)
- LOAD_REG_IMMEDIATE(r8,__bss_start)
- sub r11,r11,r8 /* bss size */
- addi r11,r11,7 /* round up to an even double word */
- rldicl. r11,r11,61,3 /* shift right by 3 */
- beq 4f
- addi r8,r8,-8
- li r0,0
- mtctr r11 /* zero this many doublewords */
-3: stdu r0,8(r8)
- bdnz 3b
-4:
- LOAD_REG_IMMEDIATE(r1,init_thread_union)
- addi r1,r1,THREAD_SIZE
- li r0,0
- stdu r0,-STACK_FRAME_OVERHEAD(r1)
-
- LOAD_REG_IMMEDIATE(r2,__toc_start)
- addi r2,r2,0x4000
- addi r2,r2,0x4000
-
- bl .iSeries_early_setup
- bl .early_setup
-
- /* relocation is on at this point */
-
- b .start_here_common
-#endif /* CONFIG_PPC_ISERIES */
-
-
_STATIC(__mmu_off)
mfmsr r3
andi. r0,r3,MSR_IR|MSR_DR
@@ -1902,6 +1819,7 @@ _GLOBAL(pmac_secondary_start)
* r13 = paca virtual address
* SPRG3 = paca virtual address
*/
+ .globl __secondary_start
__secondary_start:
/* Set thread priority to MEDIUM */
HMT_MEDIUM
@@ -2032,7 +1950,7 @@ _INIT_STATIC(start_here_multiplatform)
b . /* prevent speculative execution */
/* This is where all platforms converge execution */
-_INIT_STATIC(start_here_common)
+_INIT_GLOBAL(start_here_common)
/* relocation is on at this point */
/* The following code sets up the SP and TOC now that we are */
diff --git a/arch/powerpc/platforms/iseries/Makefile b/arch/powerpc/platforms/iseries/Makefile
index 13ac301..f023616 100644
--- a/arch/powerpc/platforms/iseries/Makefile
+++ b/arch/powerpc/platforms/iseries/Makefile
@@ -2,6 +2,7 @@ EXTRA_CFLAGS += -mno-minimal-toc
extra-y += dt.o
+obj-y += head.o
obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt_mod.o mf.o lpevents.o \
hvcall.o proc.o htab.o iommu.o misc.o irq.o
obj-$(CONFIG_PCI) += pci.o vpdinfo.o
diff --git a/arch/powerpc/platforms/iseries/head.S b/arch/powerpc/platforms/iseries/head.S
new file mode 100644
index 0000000..b6e2f8c
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/head.S
@@ -0,0 +1,114 @@
+/*
+ * Low level routines for legacy iSeries support.
+ *
+ * Extracted from head_64.S
+ *
+ * PowerPC version
+ * Copyright (C) 1995-1996 Gary Thomas (gdt at linuxppc.org)
+ *
+ * Rewritten by Cort Dougan (cort at cs.nmt.edu) for PReP
+ * Copyright (C) 1996 Cort Dougan <cort at cs.nmt.edu>
+ * Adapted for Power Macintosh by Paul Mackerras.
+ * Low-level exception handlers and MMU support
+ * rewritten by Paul Mackerras.
+ * Copyright (C) 1996 Paul Mackerras.
+ *
+ * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
+ * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
+ *
+ * This file contains the low-level support and setup for the
+ * PowerPC-64 platform, including trap and interrupt dispatch.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/reg.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/ptrace.h>
+
+ .text
+
+ .globl system_reset_iSeries
+system_reset_iSeries:
+ mfspr r13,SPRN_SPRG3 /* Get paca address */
+ mfmsr r24
+ ori r24,r24,MSR_RI
+ mtmsrd r24 /* RI on */
+ lhz r24,PACAPACAINDEX(r13) /* Get processor # */
+ cmpwi 0,r24,0 /* Are we processor 0? */
+ bne 1f
+ b .__start_initialization_iSeries /* Start up the first processor */
+1: mfspr r4,SPRN_CTRLF
+ li r5,CTRL_RUNLATCH /* Turn off the run light */
+ andc r4,r4,r5
+ mtspr SPRN_CTRLT,r4
+
+1:
+ HMT_LOW
+#ifdef CONFIG_SMP
+ lbz r23,PACAPROCSTART(r13) /* Test if this processor
+ * should start */
+ sync
+ LOAD_REG_IMMEDIATE(r3,current_set)
+ sldi r28,r24,3 /* get current_set[cpu#] */
+ ldx r3,r3,r28
+ addi r1,r3,THREAD_SIZE
+ subi r1,r1,STACK_FRAME_OVERHEAD
+
+ cmpwi 0,r23,0
+ beq iSeries_secondary_smp_loop /* Loop until told to go */
+ b __secondary_start /* Loop until told to go */
+iSeries_secondary_smp_loop:
+ /* Let the Hypervisor know we are alive */
+ /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
+ lis r3,0x8002
+ rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */
+#else /* CONFIG_SMP */
+ /* Yield the processor. This is required for non-SMP kernels
+ which are running on multi-threaded machines. */
+ lis r3,0x8000
+ rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */
+ addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */
+ li r4,0 /* "yield timed" */
+ li r5,-1 /* "yield forever" */
+#endif /* CONFIG_SMP */
+ li r0,-1 /* r0=-1 indicates a Hypervisor call */
+ sc /* Invoke the hypervisor via a system call */
+ mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */
+ b 1b /* If SMP not configured, secondaries
+ * loop forever */
+
+_INIT_STATIC(__start_initialization_iSeries)
+ /* Clear out the BSS */
+ LOAD_REG_IMMEDIATE(r11,__bss_stop)
+ LOAD_REG_IMMEDIATE(r8,__bss_start)
+ sub r11,r11,r8 /* bss size */
+ addi r11,r11,7 /* round up to an even double word */
+ rldicl. r11,r11,61,3 /* shift right by 3 */
+ beq 4f
+ addi r8,r8,-8
+ li r0,0
+ mtctr r11 /* zero this many doublewords */
+3: stdu r0,8(r8)
+ bdnz 3b
+4:
+ LOAD_REG_IMMEDIATE(r1,init_thread_union)
+ addi r1,r1,THREAD_SIZE
+ li r0,0
+ stdu r0,-STACK_FRAME_OVERHEAD(r1)
+
+ LOAD_REG_IMMEDIATE(r2,__toc_start)
+ addi r2,r2,0x4000
+ addi r2,r2,0x4000
+
+ bl .iSeries_early_setup
+ bl .early_setup
+
+ /* relocation is on at this point */
+
+ b .start_here_common
diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h
index 6532572..211fdae 100644
--- a/include/asm-powerpc/ppc_asm.h
+++ b/include/asm-powerpc/ppc_asm.h
@@ -155,6 +155,20 @@ name: \
.type GLUE(.,name), at function; \
GLUE(.,name):
+#define _INIT_GLOBAL(name) \
+ .section ".text.init.refok"; \
+ .align 2 ; \
+ .globl name; \
+ .globl GLUE(.,name); \
+ .section ".opd","aw"; \
+name: \
+ .quad GLUE(.,name); \
+ .quad .TOC. at tocbase; \
+ .quad 0; \
+ .previous; \
+ .type GLUE(.,name), at function; \
+GLUE(.,name):
+
#define _KPROBE(name) \
.section ".kprobes.text","a"; \
.align 2 ; \
--
1.5.2.4
More information about the Linuxppc-dev
mailing list