[PATCH 10/20] bootwrapper: Add CPM serial driver.
Scott Wood
scottwood at freescale.com
Tue Aug 21 03:39:57 EST 2007
This serial port is used on all 8xx, many 82xx, and some 85xx chips.
The driver requires that the port has already been set up by the firmware
and/or platform code.
Signed-off-by: Scott Wood <scottwood at freescale.com>
---
arch/powerpc/boot/Makefile | 3 +-
arch/powerpc/boot/cpm-serial.c | 249 ++++++++++++++++++++++++++++++++++++++++
arch/powerpc/boot/ops.h | 1 +
arch/powerpc/boot/serial.c | 5 +
4 files changed, 257 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/boot/cpm-serial.c
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 61a6f34..997980f 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -44,7 +44,8 @@ $(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
- 44x.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c
+ 44x.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c \
+ cpm-serial.c
src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \
cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
ps3-head.S ps3-hvcall.S ps3.c
diff --git a/arch/powerpc/boot/cpm-serial.c b/arch/powerpc/boot/cpm-serial.c
new file mode 100644
index 0000000..fcb8b5e
--- /dev/null
+++ b/arch/powerpc/boot/cpm-serial.c
@@ -0,0 +1,249 @@
+/*
+ * CPM serial console support.
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood at freescale.com>
+ *
+ * It is assumed that the firmware (or the platform file) has already set
+ * up the port.
+ */
+
+#include "types.h"
+#include "io.h"
+#include "ops.h"
+
+struct cpm_scc {
+ u32 gsmrl;
+ u32 gsmrh;
+ u16 psmr;
+ u8 res1[2];
+ u16 todr;
+ u16 dsr;
+ u16 scce;
+ u8 res2[2];
+ u16 sccm;
+ u8 res3;
+ u8 sccs;
+ u8 res4[8];
+};
+
+struct cpm_smc {
+ u8 res1[2];
+ u16 smcmr;
+ u8 res2[2];
+ u8 smce;
+ u8 res3[3];
+ u8 smcm;
+ u8 res4[5];
+};
+
+struct cpm_param {
+ u16 rbase;
+ u16 tbase;
+ u8 rfcr;
+ u8 tfcr;
+};
+
+struct cpm_bd {
+ u16 sc; /* Status and Control */
+ u16 len; /* Data length in buffer */
+ u8 *addr; /* Buffer address in host memory */
+};
+
+static void *cpcr;
+static struct cpm_param *param;
+static struct cpm_smc *smc;
+static struct cpm_scc *scc;
+struct cpm_bd *tbdf, *rbdf;
+static u32 cpm_cmd;
+static u8 *dpram_start;
+
+static void (*do_cmd)(int op);
+static void (*enable_port)(void);
+static void (*disable_port)(void);
+
+#define CPM_CMD_STOP_TX 4
+#define CPM_CMD_RESTART_TX 6
+#define CPM_CMD_INIT_RX_TX 0
+
+static void cpm1_cmd(int op)
+{
+ while (in_be16(cpcr) & 1)
+ ;
+
+ out_be16(cpcr, (op << 8) | cpm_cmd | 1);
+
+ while (in_be16(cpcr) & 1)
+ ;
+}
+
+static void cpm2_cmd(int op)
+{
+ while (in_be32(cpcr) & 0x10000)
+ ;
+
+ out_be32(cpcr, op | cpm_cmd | 0x10000);
+
+ while (in_be32(cpcr) & 0x10000)
+ ;
+}
+
+static void smc_disable_port(void)
+{
+ do_cmd(CPM_CMD_STOP_TX);
+ out_be16(&smc->smcmr, in_be16(&smc->smcmr) & ~3);
+}
+
+static void scc_disable_port(void)
+{
+ do_cmd(CPM_CMD_STOP_TX);
+ out_be32(&scc->gsmrl, in_be32(&scc->gsmrl) & ~0x30);
+}
+
+static void smc_enable_port(void)
+{
+ out_be16(&smc->smcmr, in_be16(&smc->smcmr) | 3);
+ do_cmd(CPM_CMD_RESTART_TX);
+}
+
+static void scc_enable_port(void)
+{
+ out_be32(&scc->gsmrl, in_be32(&scc->gsmrl) | 0x30);
+ do_cmd(CPM_CMD_RESTART_TX);
+}
+
+static int cpm_serial_open(void)
+{
+ int dpaddr = 0x800;
+ disable_port();
+
+ out_8(¶m->rfcr, 0x10);
+ out_8(¶m->tfcr, 0x10);
+
+ rbdf = (struct cpm_bd *)(dpram_start + dpaddr);
+ rbdf->addr = (u8 *)(rbdf + 2);
+ rbdf->sc = 0xa000;
+ rbdf->len = 1;
+
+ tbdf = rbdf + 1;
+ tbdf->addr = (u8 *)(rbdf + 2) + 1;
+ tbdf->sc = 0x2000;
+ tbdf->len = 1;
+
+ sync();
+ out_be16(¶m->rbase, dpaddr);
+ out_be16(¶m->tbase, dpaddr + sizeof(struct cpm_bd));
+
+ do_cmd(CPM_CMD_INIT_RX_TX);
+
+ enable_port();
+ return 0;
+}
+
+static void cpm_serial_putc(unsigned char c)
+{
+ while (tbdf->sc & 0x8000)
+ barrier();
+
+ sync();
+
+ tbdf->addr[0] = c;
+ eieio();
+ tbdf->sc |= 0x8000;
+}
+
+static unsigned char cpm_serial_tstc(void)
+{
+ barrier();
+ return !(rbdf->sc & 0x8000);
+}
+
+static unsigned char cpm_serial_getc(void)
+{
+ unsigned char c;
+
+ while (!cpm_serial_tstc())
+ ;
+
+ sync();
+ c = rbdf->addr[0];
+ eieio();
+ rbdf->sc |= 0x8000;
+
+ return c;
+}
+
+int cpm_console_init(void *devp, struct serial_console_data *scdp)
+{
+ void *reg_virt[2];
+ int is_smc = 0, is_cpm2 = 0, n;
+ unsigned long reg_phys;
+ void *parent;
+
+ if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) {
+ is_smc = 1;
+ } else if (dt_is_compatible(devp, "fsl,cpm2-scc-uart")) {
+ is_cpm2 = 1;
+ } else if (dt_is_compatible(devp, "fsl,cpm2-smc-uart")) {
+ is_cpm2 = 1;
+ is_smc = 1;
+ }
+
+ if (is_smc) {
+ enable_port = smc_enable_port;
+ disable_port = smc_disable_port;
+ } else {
+ enable_port = scc_enable_port;
+ disable_port = scc_disable_port;
+ }
+
+ if (is_cpm2)
+ do_cmd = cpm2_cmd;
+ else
+ do_cmd = cpm1_cmd;
+
+ n = getprop(devp, "fsl,cpm-command", &cpm_cmd, 4);
+ if (n < 4)
+ return -1;
+
+ n = getprop(devp, "virtual-reg", reg_virt, sizeof(reg_virt));
+ if (n < (int)sizeof(reg_virt)) {
+ for (n = 0; n < 2; n++) {
+ if (!dt_xlate_reg(devp, n, ®_phys, NULL))
+ return -1;
+
+ reg_virt[n] = (void *)reg_phys;
+ }
+ }
+
+ if (is_smc)
+ smc = reg_virt[0];
+ else
+ scc = reg_virt[0];
+
+ param = reg_virt[1];
+
+ parent = get_parent(devp);
+ if (!parent)
+ return -1;
+
+ n = getprop(parent, "virtual-reg", reg_virt, sizeof(reg_virt));
+ if (n < (int)sizeof(reg_virt)) {
+ for (n = 0; n < 2; n++) {
+ if (!dt_xlate_reg(parent, n, ®_phys, NULL))
+ return -1;
+
+ reg_virt[n] = (void *)reg_phys;
+ }
+ }
+
+ cpcr = reg_virt[0];
+ dpram_start = reg_virt[1];
+
+ scdp->open = cpm_serial_open;
+ scdp->putc = cpm_serial_putc;
+ scdp->getc = cpm_serial_getc;
+ scdp->tstc = cpm_serial_tstc;
+
+ return 0;
+}
diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h
index e45b364..2bc2f02 100644
--- a/arch/powerpc/boot/ops.h
+++ b/arch/powerpc/boot/ops.h
@@ -82,6 +82,7 @@ int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device);
int serial_console_init(void);
int ns16550_console_init(void *devp, struct serial_console_data *scdp);
int mpsc_console_init(void *devp, struct serial_console_data *scdp);
+int cpm_console_init(void *devp, struct serial_console_data *scdp);
void *simple_alloc_init(char *base, unsigned long heap_size,
unsigned long granularity, unsigned long max_allocs);
extern void flush_cache(void *, unsigned long);
diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c
index 944f0ee..d47f8e0 100644
--- a/arch/powerpc/boot/serial.c
+++ b/arch/powerpc/boot/serial.c
@@ -121,6 +121,11 @@ int serial_console_init(void)
rc = ns16550_console_init(devp, &serial_cd);
else if (dt_is_compatible(devp, "marvell,mpsc"))
rc = mpsc_console_init(devp, &serial_cd);
+ else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") ||
+ dt_is_compatible(devp, "fsl,cpm1-smc-uart") ||
+ dt_is_compatible(devp, "fsl,cpm2-scc-uart") ||
+ dt_is_compatible(devp, "fsl,cpm2-smc-uart"))
+ rc = cpm_console_init(devp, &serial_cd);
/* Add other serial console driver calls here */
--
1.5.0.3
More information about the Linuxppc-dev
mailing list