[PATCH 3/4] PowerPC 440EPx: Sequoia bootwrapper

Valentine Barshak vbarshak at ru.mvista.com
Thu Aug 16 04:23:18 EST 2007


The patches are based mainly on the Bamboo board support by Josh Boyer 
and should be applied on top of the "[patch 00/10] 4xx patch series for 
2.6.24"

http://ozlabs.org/pipermail/linuxppc-dev/2007-August/040512.html

The 2.6.24 4xx patch series is included in the following git tree:
git://git.infradead.org/users/jwboyer/powerpc.git
Please, take a look at the first message of the thread.
Thanks,
Valentine.

Jerone Young wrote:
> What source tree patch based on? The latest kernel.org git tree does not
> have arch/powerpc/boot/4xx.c or arch/powerpc/boot/4xx.h . This patch is
> attempting to patch these files.
> 
> On Tue, 2007-08-14 at 22:53 +0400, Valentine Barshak wrote:
>> Bootwrapper code for AMCC 440EPx Sequoia board.
>> The DDR2 Denali controller support has been moved to
>>  arch/powerpc/boot/4xx.c
>> The code also uses 440EP clocking fixups
>> initially provided for 440EP Bamboo.
>>
>> Signed-off-by: Valentine Barshak <vbarshak at ru.mvista.com>
>> ---
>>  arch/powerpc/boot/44x.h            |    1 
>>  arch/powerpc/boot/4xx.c            |  108 +++++++++++++++++++++++++++++++++++++
>>  arch/powerpc/boot/4xx.h            |    1 
>>  arch/powerpc/boot/Makefile         |    6 +-
>>  arch/powerpc/boot/cuboot-sequoia.c |   31 ++++++++++
>>  arch/powerpc/boot/sequoia.c        |   48 ++++++++++++++++
>>  6 files changed, 193 insertions(+), 2 deletions(-)
>>
>> diff -ruN linux-2.6.orig/arch/powerpc/boot/44x.h linux-2.6/arch/powerpc/boot/44x.h
>> --- linux-2.6.orig/arch/powerpc/boot/44x.h	2007-08-14 17:11:16.000000000 +0400
>> +++ linux-2.6/arch/powerpc/boot/44x.h	2007-08-14 17:25:37.000000000 +0400
>> @@ -12,5 +12,6 @@
>>
>>  void ebony_init(void *mac0, void *mac1);
>>  void bamboo_init(void);
>> +void sequoia_init(void *mac0, void *mac1);
>>
>>  #endif /* _PPC_BOOT_44X_H_ */
>> diff -ruN linux-2.6.orig/arch/powerpc/boot/4xx.c linux-2.6/arch/powerpc/boot/4xx.c
>> --- linux-2.6.orig/arch/powerpc/boot/4xx.c	2007-08-14 17:11:16.000000000 +0400
>> +++ linux-2.6/arch/powerpc/boot/4xx.c	2007-08-14 20:16:57.000000000 +0400
>> @@ -39,6 +39,114 @@
>>  	dt_fixup_memory(0, memsize);
>>  }
>>
>> +/* 4xx DDR1/2 Denali memory controller support */
>> +/* DDR0 registers */
>> +#define DDR0_02			2
>> +#define DDR0_08			8
>> +#define DDR0_10			10
>> +#define DDR0_14			14
>> +#define DDR0_42			42
>> +#define DDR0_43			43
>> +
>> +/* DDR0_02 */
>> +#define DDR_START		0x1
>> +#define DDR_START_SHIFT		0
>> +#define DDR_MAX_CS_REG		0x3
>> +#define DDR_MAX_CS_REG_SHIFT	24
>> +#define DDR_MAX_COL_REG		0xf
>> +#define DDR_MAX_COL_REG_SHIFT	16
>> +#define DDR_MAX_ROW_REG		0xf
>> +#define DDR_MAX_ROW_REG_SHIFT	8
>> +/* DDR0_08 */
>> +#define DDR_DDR2_MODE		0x1
>> +#define DDR_DDR2_MODE_SHIFT	0
>> +/* DDR0_10 */
>> +#define DDR_CS_MAP		0x3
>> +#define DDR_CS_MAP_SHIFT	8
>> +/* DDR0_14 */
>> +#define DDR_REDUC		0x1
>> +#define DDR_REDUC_SHIFT		16
>> +/* DDR0_42 */
>> +#define DDR_APIN		0x7
>> +#define DDR_APIN_SHIFT		24
>> +/* DDR0_43 */
>> +#define DDR_COL_SZ		0x7
>> +#define DDR_COL_SZ_SHIFT	8
>> +#define DDR_BANK8		0x1
>> +#define DDR_BANK8_SHIFT		0
>> +
>> +#define DDR_GET_VAL(val, mask, shift)	(((val) >> (shift)) & (mask))
>> +
>> +static inline u32 mfdcr_sdram0(u32 reg)
>> +{
>> +        mtdcr(DCRN_SDRAM0_CFGADDR, reg);
>> +        return mfdcr(DCRN_SDRAM0_CFGDATA);
>> +}
>> +
>> +void ibm4xx_denali_fixup_memsize(void)
>> +{
>> +	u32 val, max_cs, max_col, max_row;
>> +	u32 cs, col, row, bank, dpath;
>> +	unsigned long memsize;
>> +
>> +	val = mfdcr_sdram0(DDR0_02);
>> +	if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
>> +		fatal("DDR controller is not initialized\n");
>> +
>> +	/* get maximum cs col and row values */
>> +	max_cs  = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
>> +	max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
>> +	max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
>> +
>> +	/* get CS value */
>> +	val = mfdcr_sdram0(DDR0_10);
>> +
>> +	val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT);
>> +	cs = 0;
>> +	while (val) {
>> +		if (val && 0x1)
>> +			cs++;
>> +		val = val >> 1;
>> +	}
>> +
>> +	if (!cs)
>> +		fatal("No memory installed\n");
>> +	if (cs > max_cs)
>> +		fatal("DDR wrong CS configuration\n");
>> +
>> +	/* get data path bytes */
>> +	val = mfdcr_sdram0(DDR0_14);
>> +
>> +	if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT))
>> +		dpath = 8; /* 64 bits */
>> +	else
>> +		dpath = 4; /* 32 bits */
>> +
>> +	/* get adress pins (rows) */
>> +	val = mfdcr_sdram0(DDR0_42);
>> +
>> +	row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT);
>> +	if (row > max_row)
>> +		fatal("DDR wrong APIN configuration\n");
>> +	row = max_row - row;
>> +
>> +	/* get collomn size and banks */
>> +	val = mfdcr_sdram0(DDR0_43);
>> +
>> +	col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT);
>> +	if (col > max_col)
>> +		fatal("DDR wrong COL configuration\n");
>> +	col = max_col - col;
>> +
>> +	if (DDR_GET_VAL(val, DDR_BANK8, DDR_BANK8_SHIFT))
>> +		bank = 8; /* 8 banks */
>> +	else
>> +		bank = 4; /* 4 banks */
>> +
>> +	memsize = cs * (1 << (col+row)) * bank * dpath;
>> +	dt_fixup_memory(0, memsize);
>> +}
>> +
>>  #define DBCR0_RST_SYSTEM 0x30000000
>>
>>  void ibm44x_dbcr_reset(void)
>> diff -ruN linux-2.6.orig/arch/powerpc/boot/4xx.h linux-2.6/arch/powerpc/boot/4xx.h
>> --- linux-2.6.orig/arch/powerpc/boot/4xx.h	2007-08-14 17:11:16.000000000 +0400
>> +++ linux-2.6/arch/powerpc/boot/4xx.h	2007-08-14 20:24:22.000000000 +0400
>> @@ -12,6 +12,7 @@
>>  #define _POWERPC_BOOT_4XX_H_
>>
>>  void ibm4xx_fixup_memsize(void);
>> +void ibm4xx_denali_fixup_memsize(void);
>>  void ibm44x_dbcr_reset(void);
>>  void ibm40x_dbcr_reset(void);
>>  void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1);
>> diff -ruN linux-2.6.orig/arch/powerpc/boot/cuboot-sequoia.c linux-2.6/arch/powerpc/boot/cuboot-sequoia.c
>> --- linux-2.6.orig/arch/powerpc/boot/cuboot-sequoia.c	1970-01-01 03:00:00.000000000 +0300
>> +++ linux-2.6/arch/powerpc/boot/cuboot-sequoia.c	2007-08-14 17:25:37.000000000 +0400
>> @@ -0,0 +1,31 @@
>> +/*
>> + * Old U-boot compatibility for Sequoia
>> + *
>> + * Based on Ebony code by David Gibson <david at gibson.dropbear.id.au>
>> + *
>> + * Copyright 2007 David Gibson, IBM Corporatio.
>> + *   Based on cuboot-83xx.c, which is:
>> + * Copyright (c) 2007 Freescale Semiconductor, Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published
>> + * by the Free Software Foundation.
>> + */
>> +
>> +#include "ops.h"
>> +#include "stdio.h"
>> +#include "44x.h"
>> +#include "cuboot.h"
>> +
>> +#define TARGET_4xx
>> +#define TARGET_44x
>> +#include "ppcboot.h"
>> +
>> +static bd_t bd;
>> +
>> +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
>> +                   unsigned long r6, unsigned long r7)
>> +{
>> +	CUBOOT_INIT();
>> +	sequoia_init(&bd.bi_enetaddr, &bd.bi_enet1addr);
>> +}
>> diff -ruN linux-2.6.orig/arch/powerpc/boot/Makefile linux-2.6/arch/powerpc/boot/Makefile
>> --- linux-2.6.orig/arch/powerpc/boot/Makefile	2007-08-14 17:11:16.000000000 +0400
>> +++ linux-2.6/arch/powerpc/boot/Makefile	2007-08-14 17:25:38.000000000 +0400
>> @@ -44,10 +44,11 @@
>>  src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
>>  		ns16550.c serial.c simple_alloc.c div64.S util.S \
>>  		gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
>> -		4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c
>> +		4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
>> +		sequoia.c
>>  src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \
>>  		cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
>> -		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c
>> +		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-sequoia.c
>>  src-boot := $(src-wlib) $(src-plat) empty.c
>>
>>  src-boot := $(addprefix $(obj)/, $(src-boot))
>> @@ -143,6 +144,7 @@
>>  image-$(CONFIG_PPC_85xx)		+= cuImage.85xx
>>  image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
>>  image-$(CONFIG_BAMBOO)			+= treeImage.bamboo
>> +image-$(CONFIG_SEQUOIA)			+= cuImage.sequoia
>>  endif
>>
>>  # For 32-bit powermacs, build the COFF and miboot images
>> diff -ruN linux-2.6.orig/arch/powerpc/boot/sequoia.c linux-2.6/arch/powerpc/boot/sequoia.c
>> --- linux-2.6.orig/arch/powerpc/boot/sequoia.c	1970-01-01 03:00:00.000000000 +0300
>> +++ linux-2.6/arch/powerpc/boot/sequoia.c	2007-08-14 20:52:10.000000000 +0400
>> @@ -0,0 +1,48 @@
>> +/*
>> + * Valentine Barshak <vbarshak at ru.mvista.com>
>> + * Copyright 2007 MontaVista Software, Inc
>> + *
>> + * Based on Bamboo code by Josh Boyer <jwboyer at linux.vnet.ibm.com>
>> + * Copyright IBM Corporation, 2007
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * as published by the Free Software Foundation; version 2 of the License
>> + */
>> +#include <stdarg.h>
>> +#include <stddef.h>
>> +#include "types.h"
>> +#include "elf.h"
>> +#include "string.h"
>> +#include "stdio.h"
>> +#include "page.h"
>> +#include "ops.h"
>> +#include "dcr.h"
>> +#include "4xx.h"
>> +#include "44x.h"
>> +
>> +extern char _dtb_start[];
>> +extern char _dtb_end[];
>> +
>> +static u8 *sequoia_mac0, *sequoia_mac1;
>> +
>> +
>> +static void sequoia_fixups(void)
>> +{
>> +	unsigned long sysclk = 33333333;
>> +
>> +	ibm440ep_fixup_clocks(sysclk, 11059200);
>> +	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
>> +	ibm4xx_denali_fixup_memsize();
>> +	dt_fixup_mac_addresses(sequoia_mac0, sequoia_mac1);
>> +}
>> +
>> +void sequoia_init(void *mac0, void *mac1)
>> +{
>> +	platform_ops.fixups = sequoia_fixups;
>> +	platform_ops.exit = ibm44x_dbcr_reset;
>> +	sequoia_mac0 = mac0;
>> +	sequoia_mac1 = mac1;
>> +	ft_init(_dtb_start, 0, 32);
>> +	serial_console_init();
>> +}
>> _______________________________________________
>> Linuxppc-dev mailing list
>> Linuxppc-dev at ozlabs.org
>> https://ozlabs.org/mailman/listinfo/linuxppc-dev
> 




More information about the Linuxppc-dev mailing list