[PATCH 4/4] PowerPC 440EPx: Sequoia board support
Valentine Barshak
vbarshak at ru.mvista.com
Wed Aug 15 23:53:00 EST 2007
David Gibson wrote:
> On Tue, Aug 14, 2007 at 11:04:09PM +0400, Valentine Barshak wrote:
>> AMCC 440EPx Sequoia board support.
>> The second bit (0x4) in the 440EPx/440GRx PVR value indicates
>> the Security/Kasumi engine absence if set.
>> This bit has been removed from the pvr mask to use a single
>> cputable entry for with/without Security/Kasumi cpu versions.
>>
>>
>> Signed-off-by: Valentine Barshak <vbarshak at ru.mvista.com>
>> ---
>> arch/powerpc/kernel/cputable.c | 18 +++++++++
>> arch/powerpc/kernel/head_44x.S | 2 -
>> arch/powerpc/platforms/44x/Kconfig | 17 ++++++++-
>> arch/powerpc/platforms/44x/Makefile | 1
>> arch/powerpc/platforms/44x/sequoia.c | 66 +++++++++++++++++++++++++++++++++++
>> 5 files changed, 102 insertions(+), 2 deletions(-)
>>
>> diff -ruN linux-2.6.orig/arch/powerpc/kernel/cputable.c linux-2.6/arch/powerpc/kernel/cputable.c
>> --- linux-2.6.orig/arch/powerpc/kernel/cputable.c 2007-08-14 17:11:18.000000000 +0400
>> +++ linux-2.6/arch/powerpc/kernel/cputable.c 2007-08-14 19:37:54.000000000 +0400
>> @@ -1132,6 +1132,24 @@
>> .dcache_bsize = 32,
>> .platform = "ppc440",
>> },
>> + { /* 440EPX */
>> + .pvr_mask = 0xf0000ffb,
>> + .pvr_value = 0x200008D0,
>> + .cpu_name = "440EPX",
>> + .cpu_features = CPU_FTRS_44X,
>> + .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
>> + .icache_bsize = 32,
>> + .dcache_bsize = 32,
>> + },
>> + { /* 440GRX */
>> + .pvr_mask = 0xf0000ffb,
>> + .pvr_value = 0x200008D8,
>> + .cpu_name = "440GRX",
>> + .cpu_features = CPU_FTRS_44X,
>> + .cpu_user_features = COMMON_USER_BOOKE,
>> + .icache_bsize = 32,
>> + .dcache_bsize = 32,
>> + },
>> { /* 440GP Rev. B */
>> .pvr_mask = 0xf0000fff,
>> .pvr_value = 0x40000440,
>> diff -ruN linux-2.6.orig/arch/powerpc/kernel/head_44x.S linux-2.6/arch/powerpc/kernel/head_44x.S
>> --- linux-2.6.orig/arch/powerpc/kernel/head_44x.S 2007-08-14 17:11:19.000000000 +0400
>> +++ linux-2.6/arch/powerpc/kernel/head_44x.S 2007-08-14 17:18:43.000000000 +0400
>> @@ -217,7 +217,7 @@
>> lis r4,interrupt_base at h /* IVPR only uses the high 16-bits */
>> mtspr SPRN_IVPR,r4
>>
>> -#ifdef CONFIG_440EP
>> +#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
>
> Since we should now be able to support both 440GP and 440EP boards in
> the same kernel, this probably needs to become a feature section.
>
Thanks for pointing that out.
Talking about this, there appears to be more stuff that would need to
become feature sections. There're lots of other ifdefs in
arch/powerpc/kernel/head_44x.S, like ifdef CONFIG_PPC_FPU or ifdef
CONFIG_440A
Looks like all these things have to be detected dynamically and
configured properly at runtime since we tend to support more than one
CPU in the same kernel.
I think this should come as a separate patch, that replaces all these
ifdefs with the FTR_SECTION stuff.
Thanks,
Valentine.
>> /* Clear DAPUIB flag in CCR0 (enable APU between CPU and FPU) */
>> mfspr r2,SPRN_CCR0
>> lis r3,0xffef
>> diff -ruN linux-2.6.orig/arch/powerpc/platforms/44x/Kconfig linux-2.6/arch/powerpc/platforms/44x/Kconfig
>> --- linux-2.6.orig/arch/powerpc/platforms/44x/Kconfig 2007-08-14 17:11:17.000000000 +0400
>> +++ linux-2.6/arch/powerpc/platforms/44x/Kconfig 2007-08-14 20:36:19.000000000 +0400
>> @@ -14,6 +14,14 @@
>> help
>> This option enables support for the IBM PPC440GP evaluation board.
>>
>> +config SEQUOIA
>> + bool "Sequoia"
>> + depends on 44x
>> + default n
>> + select 440EPX
>> + help
>> + This option enables support for the AMCC PPC440EPX evaluation board.
>> +
>> #config LUAN
>> # bool "Luan"
>> # depends on 44x
>> @@ -37,6 +45,13 @@
>> select IBM440EP_ERR42
>> # select IBM_NEW_EMAC_ZMII
>>
>> +config 440EPX
>> + bool
>> + select PPC_FPU
>> +# Disabled until the new EMAC Driver is merged.
>> +# select IBM_NEW_EMAC_EMAC4
>> +# select IBM_NEW_EMAC_ZMII
>> +
>> config 440GP
>> bool
>> # Disabled until the new EMAC Driver is merged.
>> @@ -50,7 +65,7 @@
>>
>> config 440A
>> bool
>> - depends on 440GX
>> + depends on 440GX || 440EPX
>> default y
>>
>> # 44x errata/workaround config symbols, selected by the CPU models above
>> diff -ruN linux-2.6.orig/arch/powerpc/platforms/44x/Makefile linux-2.6/arch/powerpc/platforms/44x/Makefile
>> --- linux-2.6.orig/arch/powerpc/platforms/44x/Makefile 2007-08-14 17:11:17.000000000 +0400
>> +++ linux-2.6/arch/powerpc/platforms/44x/Makefile 2007-08-14 17:18:43.000000000 +0400
>> @@ -1,3 +1,4 @@
>> obj-$(CONFIG_44x) := misc_44x.o
>> obj-$(CONFIG_EBONY) += ebony.o
>> obj-$(CONFIG_BAMBOO) += bamboo.o
>> +obj-$(CONFIG_SEQUOIA) += sequoia.o
>> diff -ruN linux-2.6.orig/arch/powerpc/platforms/44x/sequoia.c linux-2.6/arch/powerpc/platforms/44x/sequoia.c
>> --- linux-2.6.orig/arch/powerpc/platforms/44x/sequoia.c 1970-01-01 03:00:00.000000000 +0300
>> +++ linux-2.6/arch/powerpc/platforms/44x/sequoia.c 2007-08-14 20:12:26.000000000 +0400
>> @@ -0,0 +1,66 @@
>> +/*
>> + * Sequoia board specific routines
>> + *
>> + * Valentine Barshak <vbarshak at ru.mvista.com>
>> + * Copyright 2007 MontaVista Software Inc.
>> + *
>> + * Based on the Bamboo code by
>> + * Josh Boyer <jwboyer at linux.vnet.ibm.com>
>> + * Copyright 2007 IBM Corporation
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + */
>> +#include <linux/init.h>
>> +#include <asm/machdep.h>
>> +#include <asm/prom.h>
>> +#include <asm/udbg.h>
>> +#include <asm/time.h>
>> +#include <asm/uic.h>
>> +#include <asm/of_platform.h>
>> +#include "44x.h"
>> +
>> +static struct of_device_id sequoia_of_bus[] = {
>> + { .compatible = "ibm,plb", },
>> + { .compatible = "ibm,opb", },
>> + { .compatible = "ibm,ebc", },
>> + {},
>> +};
>> +
>> +static int __init sequoia_device_probe(void)
>> +{
>> + if (!machine_is(sequoia))
>> + return 0;
>> +
>> + of_platform_bus_probe(NULL, sequoia_of_bus, NULL);
>> +
>> + return 0;
>> +}
>> +device_initcall(sequoia_device_probe);
>> +
>> +static int __init sequoia_probe(void)
>> +{
>> + unsigned long root = of_get_flat_dt_root();
>> +
>> + if (!of_flat_dt_is_compatible(root, "amcc,sequoia"))
>> + return 0;
>> +
>> + return 1;
>> +}
>> +
>> +static void __init sequoia_setup_arch(void)
>> +{
>> +}
>> +
>> +define_machine(sequoia) {
>> + .name = "Sequoia",
>> + .probe = sequoia_probe,
>> + .setup_arch = sequoia_setup_arch,
>> + .progress = udbg_progress,
>> + .init_IRQ = uic_init_tree,
>> + .get_irq = uic_get_irq,
>> + .restart = ppc44x_reset_system,
>> + .calibrate_decr = generic_calibrate_decr,
>> +};
>> _______________________________________________
>> Linuxppc-dev mailing list
>> Linuxppc-dev at ozlabs.org
>> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>>
>
More information about the Linuxppc-dev
mailing list