[PATCH v3 1/2] [POWERPC] MPC832x_RDB: update dts to use spi, register mmc_spi stub

[David Gibson]

On Wed, Aug 08, 2007 at 09:09:21PM +0400, Anton Vorontsov wrote:
> mmc_spi already tested to work. When it will hit mainline
> the only change that will be needed is replacing "spidev"
> by "mmc_spi".
> 
> Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
> ---
>  arch/powerpc/boot/dts/mpc832x_rdb.dts     |    4 ++-
>  arch/powerpc/platforms/83xx/mpc832x_rdb.c |   52 +++++++++++++++++++++++++++++
>  2 files changed, 55 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
> index e9c332f..664dd16 100644
> --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
> +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
> @@ -207,15 +207,17 @@
>  
>  		spi at 4c0 {
>  			device_type = "spi";
> +			fsl,device-id = <1>;

Hrm... Freescale is using these 'fsl,device-id' properties, I'm
guessing they're basically the same thing as the 'cell-index' used in
the EMAC binding.

We should co-ordinate better on this, if it's to become a
convention...

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson