pci in arch/powerpc vs arch/ppc

[Alexandros Kostopoulos]

On Tue, 07 Aug 2007 18:20:12 +0300, Scott Wood <scottwood at freescale.com>  
wrote:

> Alexandros Kostopoulos wrote:
>> Except from some macros arch/powerpc/include/asm/io.h / mpc8260_pci9.h,  
>> I  can seem to find anywhere the code regarding PCI Erratum 9. The  
>> defined  macros(in io.h) for read/write are sufficient as a workaround  
>> for PCI9?  Who does DMA and register initialization for this (it used  
>> to be done in  arch/ppc/syslib/m8260_pci_erratum9.c in arc/ppc). Maybe  
>> u-boot or the  bootwrapper?
>
> I don't think the workaround exists yet in arch/powerpc, despite the  
> config option.
>

Is there a plan to be implemented on arch/powerpc, or devices with the  
erratum will have to keep on using the legacy arch/ppc code?

>> Another question regarding resource allocation: when   
>> alloc_resource(pci_32.c), called from pcibios_allocate_resources(),  
>> during  pcibios init, attempts to allocate resources using  
>> request_resource(), the  request fails. This seems to happen because  
>> the previously scanned PCI  devices request resources in the form, e.g.  
>> 00000- 0000f (i.e. starting  from zero), and this should be mapped  
>> somewhere else in cpu mem space. My  question (in order to find my bug)  
>> is, who performs this mapping, from PCI  space to CPU space, the kernel  
>> (and if yes, where?) or the host bridge (in  which case, I've probably  
>> failed to configure it properly).
>
> If the error message is the one I'm thinking of (it always helps to post  
> the actual messages), that's normal for when the PCI bus hasn't been  
> probed by the firmware.  Linux first tries to use the BARs as they're  
> already set, which will obviously fail because they haven't been set,  
> and then it will properly allocated them.  It's harmless verbosity,  
> though it'd be nice to have a flag to tell the PCI layer to not bother  
> trying to preserve any existing BARs.
>

Well, the error message is:
PCI:0000:00:16.0: Resource 0: 0000000000000000-0000000000000fff (f=200)
PCI: Cannot allocate resource region 0 of device 0000:00:16.0
PCI:  parent is c03c4058: 0000000080000000-00000000bfffffff (f=200)

The thing is, POBARs are already setup by uboot. However the resource  
allocation for the PCI devices (not the host bridge) fails in  
request_resource (which seems to use the region requested by the device as  
is and not some mapped region in the cpu address space), and I can not  
find where in the code happens the mapping from PCI to local bus mem  
region. I mean, each PCI device requests some region, e.g. from 0000-00ff  
and this is mapped to some region in the PCI outbound window, right. For  
some reason this fails in my case, and I cannot find where in the code  
this mapping should happen.

Thank you for your help

Alex

> -Scott