[PATCH 6/6] PowerPC 440EPx: Sequoia new EMAC support

[Valentine Barshak]

Josh Boyer wrote:
> On Mon, 30 Jul 2007 19:23:39 +0400
> Valentine Barshak <vbarshak at ru.mvista.com> wrote:
> 
>> The patch adds PHY support for the Sequoia board to the new EMAC driver and
>> enables NEW_EMAC for 440EPx Kconfig.
>> The phy code has been written by Stefan Roese.
>> This has been tested with the following version of the EMAC dirver:
>>
>> http://ozlabs.org/~dgibson/home/emac/powerpc-emac-new-20070516.patch
>>
>> Signed-off-by: Stefan Roese <sr at denx.de>
>> Signed-off-by: Valentine Barshak <vbarshak at ru.mvista.com>
>> ---
>>  arch/powerpc/platforms/44x/Kconfig |    5 +---
>>  drivers/net/ibm_newemac/phy.c      |   39 +++++++++++++++++++++++++++++++++++++
>>  2 files changed, 41 insertions(+), 3 deletions(-)
>>
>> --- linux.orig/arch/powerpc/platforms/44x/Kconfig	2007-07-30 15:05:50.000000000 +0400
>> +++ linux/arch/powerpc/platforms/44x/Kconfig	2007-07-30 17:59:05.000000000 +0400
>> @@ -47,9 +47,8 @@
>>  config 440EPX
>>  	bool
>>  	select PPC_FPU
>> -# Disabled until the new EMAC Driver is merged.
>> -#	select IBM_NEW_EMAC_EMAC4
>> -#	select IBM_NEW_EMAC_ZMII
>> +	select IBM_NEW_EMAC_EMAC4
>> +	select IBM_NEW_EMAC_ZMII
> 
> Probably don't want this bit yet.  The EMAC driver isn't really merged
> yet.
> 
> josh

Actually, this one is intended for use as a separate Sequoia emac 
support patch until new emac is merged. May be I should submit it 
separately, not with the whole Sequoia bundle.