[PATCH] [SPI][POWERPC] spi_mpc83xx: in "QE mode" spiclk is sysclk/2

[Kumar Gala]

On Aug 2, 2007, at 9:26 AM, Anton Vorontsov wrote:

> For MPC8349E input to SPIBRG is SYSCLK, but it's SYSCLK/2 for
> MPC8323E (running in so-called "QE mode").

QE mode or the SPI in QE running in CPU mode?

- k

>
> This fixes clocking issues I've noticed recently.
>
> Probably someday mpc83xx_spi->sysclk should be renamed to
> mpc83xx_spi->spiclk to be less confusing.
>
> Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
> ---
>  drivers/spi/spi_mpc83xx.c |    6 +++++-
>  1 files changed, 5 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
> index 0c16a2b..55230f7 100644
> --- a/drivers/spi/spi_mpc83xx.c
> +++ b/drivers/spi/spi_mpc83xx.c
> @@ -429,13 +429,17 @@ static int __init mpc83xx_spi_probe(struct  
> platform_device *dev)
>  	mpc83xx_spi->bitbang.chipselect = mpc83xx_spi_chipselect;
>  	mpc83xx_spi->bitbang.setup_transfer = mpc83xx_spi_setup_transfer;
>  	mpc83xx_spi->bitbang.txrx_bufs = mpc83xx_spi_bufs;
> -	mpc83xx_spi->sysclk = pdata->sysclk;
>  	mpc83xx_spi->activate_cs = pdata->activate_cs;
>  	mpc83xx_spi->deactivate_cs = pdata->deactivate_cs;
>  	mpc83xx_spi->qe_mode = pdata->qe_mode;
>  	mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
>  	mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
>
> +	if (mpc83xx_spi->qe_mode)
> +		mpc83xx_spi->sysclk = pdata->sysclk / 2;
> +	else
> +		mpc83xx_spi->sysclk = pdata->sysclk;
> +
>  	mpc83xx_spi->rx_shift = 0;
>  	mpc83xx_spi->tx_shift = 0;
>  	if (mpc83xx_spi->qe_mode) {
> -- 
> 1.5.0.6
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev