[PATCH 1/2] Add sysdev/pci_quirks.c file into PowerPC architecture with ULI chip quirk functions.
Zhang Wei
wei.zhang at freescale.com
Wed Aug 1 18:14:27 EST 2007
Add sysdev/pci_quirks.c file into PowerPC architecture with
ULI chip quirk functions.
We add generic quirk functions for ULI chips
from individual platform into arch/powerpc/sysdev/pci_quirks.c file.
Signed-off-by: Zhang Wei <wei.zhang at freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>
---
arch/powerpc/platforms/Kconfig | 4 +
arch/powerpc/sysdev/Makefile | 1 +
arch/powerpc/sysdev/pci_quirks.c | 252 ++++++++++++++++++++++++++++++++++++++
3 files changed, 257 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/sysdev/pci_quirks.c
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 932538a..10bfbe8 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -160,6 +160,10 @@ config PPC_INDIRECT_IO
select GENERIC_IOMAP
default n
+config PPC_PCI_QUIRKS
+ bool
+ default n
+
config GENERIC_IOMAP
bool
default n
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 08ce31e..d14bd73 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_FSL_PCI) += fsl_pci.o
+obj-$(CONFIG_PPC_PCI_QUIRKS) += pci_quirks.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
mv64x60-$(CONFIG_PCI) += mv64x60_pci.o
diff --git a/arch/powerpc/sysdev/pci_quirks.c b/arch/powerpc/sysdev/pci_quirks.c
new file mode 100644
index 0000000..2dc7016
--- /dev/null
+++ b/arch/powerpc/sysdev/pci_quirks.c
@@ -0,0 +1,252 @@
+/*
+ * PCI quirks for PowerPC architecture.
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Zhang Wei <wei.zhang at freescale.com>, Jul 2007
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This file contains work-arounds or the special setting for
+ * PCI hardware devices on PowerPC architecture.
+ *
+ * Note: any quirks for hotpluggable devices must _NOT_ be declared __init.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <asm-generic/rtc.h>
+
+/* The ULI1575 chip is used for MPC8641 and MPC8544 boards.
+ * The PIC in ULI1575 and legacy devices should be initialized.
+ */
+enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH};
+const unsigned char uli1575_irq_route_table[16] = {
+ 0, /* 0: Reserved */
+ 0x8, /* 1: 0b1000 */
+ 0, /* 2: Reserved */
+ 0x2, /* 3: 0b0010 */
+ 0x4, /* 4: 0b0100 */
+ 0x5, /* 5: 0b0101 */
+ 0x7, /* 6: 0b0111 */
+ 0x6, /* 7: 0b0110 */
+ 0, /* 8: Reserved */
+ 0x1, /* 9: 0b0001 */
+ 0x3, /* 10: 0b0011 */
+ 0x9, /* 11: 0b1001 */
+ 0xb, /* 12: 0b1011 */
+ 0, /* 13: Reserved */
+ 0xd, /* 14, 0b1101 */
+ 0xf, /* 15, 0b1111 */
+};
+
+static int __devinit
+get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
+{
+ struct of_irq oirq;
+ u32 laddr[3];
+ struct device_node *hosenode = hose ? hose->arch_data : NULL;
+
+ if (!hosenode)
+ return -EINVAL;
+
+ laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
+ laddr[1] = 0;
+ laddr[2] = 0;
+ of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
+ pr_debug("get_pci_irq_from_of: "
+ "pci irq addr %x, slot %d, pin %d, irq %d\n",
+ laddr[0], slot, pin, oirq.specifier[0]);
+ return oirq.specifier[0];
+}
+
+static void __devinit quirk_uli1575(struct pci_dev *dev)
+{
+ unsigned short temp;
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ unsigned char irq2pin[16];
+ unsigned long pirq_map_word = 0;
+ u32 irq;
+ int i;
+
+ /*
+ * ULI1575 interrupts route setup
+ */
+ memset(irq2pin, 0, 16); /* Initialize default value 0 */
+
+ /*
+ * PIRQA -> PIRQD mapping read from OF-tree
+ *
+ * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
+ * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
+ */
+ for (i = 0; i < 4; i++) {
+ irq = get_pci_irq_from_of(hose, 0x1a, i + 1);
+ if (irq > 0 && irq < 16)
+ irq2pin[irq] = PIRQA + (i + 3) % 4;
+ else
+ printk(KERN_WARNING "ULI1575 device"
+ "(slot %d, pin %d) irq %d is invalid.\n",
+ 17, i, irq);
+ }
+
+ /*
+ * PIRQE -> PIRQF mapping set manually
+ *
+ * IRQ pin IRQ#
+ * PIRQE ---- 9
+ * PIRQF ---- 10
+ * PIRQG ---- 11
+ * PIRQH ---- 12
+ */
+ for (i = 0; i < 4; i++)
+ irq2pin[i + 9] = PIRQE + i;
+
+ /* Set IRQ-PIRQ Mapping to ULI1575 */
+ for (i = 0; i < 16; i++)
+ if (irq2pin[i])
+ pirq_map_word |= (uli1575_irq_route_table[i] & 0xf)
+ << ((irq2pin[i] - PIRQA) * 4);
+
+ pirq_map_word |= 1<<26; /* disable all PCI-Ex INTx in EP mode*/
+
+ /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */
+ dev_dbg(&dev->dev,
+ "Setup ULI1575 IRQ mapping configuration register value = "
+ "0x%lx\n", pirq_map_word);
+ pci_write_config_dword(dev, 0x48, pirq_map_word);
+
+#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \
+ do { \
+ int irq; \
+ irq = get_pci_irq_from_of(hose, slot, pin); \
+ if (irq > 0 && irq < 16) \
+ pci_write_config_byte(dev, reg, irq2pin[irq]); \
+ else \
+ printk(KERN_WARNING "ULI1575 device" \
+ "(slot %d, pin %d) irq %d is invalid.\n", \
+ slot, pin, irq); \
+ } while (0)
+
+ /* USB 1.1 OHCI controller 1, slot 28, pin 1 */
+ ULI1575_SET_DEV_IRQ(28, 1, 0x86);
+
+ /* USB 1.1 OHCI controller 2, slot 28, pin 2 */
+ ULI1575_SET_DEV_IRQ(28, 2, 0x87);
+
+ /* USB 1.1 OHCI controller 3, slot 28, pin 3 */
+ ULI1575_SET_DEV_IRQ(28, 3, 0x88);
+
+ /* USB 2.0 controller, slot 28, pin 4 */
+ irq = get_pci_irq_from_of(hose, 28, 4);
+ if (irq >= 0 && irq <= 15)
+ pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]);
+
+ /* Audio controller, slot 29, pin 1 */
+ ULI1575_SET_DEV_IRQ(29, 1, 0x8a);
+
+ /* Modem controller, slot 29, pin 2 */
+ ULI1575_SET_DEV_IRQ(29, 2, 0x8b);
+
+ /* HD audio controller, slot 29, pin 3 */
+ ULI1575_SET_DEV_IRQ(29, 3, 0x8c);
+
+ /* SMB interrupt: slot 30, pin 1 */
+ ULI1575_SET_DEV_IRQ(30, 1, 0x8e);
+
+ /* PMU ACPI SCI interrupt: slot 30, pin 2 */
+ ULI1575_SET_DEV_IRQ(30, 2, 0x8f);
+
+ /* Serial ATA interrupt: slot 31, pin 1 */
+ ULI1575_SET_DEV_IRQ(31, 1, 0x8d);
+
+ /* Primary PATA IDE IRQ: 14
+ * Secondary PATA IDE IRQ: 15
+ */
+ pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]);
+ pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]);
+
+ /* Set IRQ14 and IRQ15 to legacy IRQs */
+ pci_read_config_word(dev, 0x46, &temp);
+ temp |= 0xc000;
+ pci_write_config_word(dev, 0x46, temp);
+
+ /* Set i8259 interrupt trigger
+ * IRQ 3: Level
+ * IRQ 4: Level
+ * IRQ 5: Level
+ * IRQ 6: Level
+ * IRQ 7: Level
+ * IRQ 9: Level
+ * IRQ 10: Level
+ * IRQ 11: Level
+ * IRQ 12: Level
+ * IRQ 14: Edge
+ * IRQ 15: Edge
+ */
+ outb(0xfa, 0x4d0);
+ outb(0x1e, 0x4d1);
+
+#undef ULI1575_SET_DEV_IRQ
+#ifdef CONFIG_GEN_RTC
+ /* RTC interface.
+ * If there is no initialization for rtc of ppc_md,
+ * using the sample functions in include/asm-generic/rtc.h
+ */
+ if (!ppc_md.get_rtc_time)
+ ppc_md.get_rtc_time = get_rtc_time;
+ if (!ppc_md.set_rtc_time)
+ ppc_md.set_rtc_time = set_rtc_time;
+#endif
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
+
+static void __devinit quirk_uli5288(struct pci_dev *dev)
+{
+ u8 c;
+ u32 l;
+
+ pci_read_config_byte(dev, 0x83, &c);
+ c |= 0x80; /* Unlock the writing to PCI_CLASS_REVISION */
+ pci_write_config_byte(dev, 0x83, c);
+
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &l);
+ pci_write_config_dword(dev, PCI_CLASS_REVISION,
+ (PCI_CLASS_STORAGE_SATA_AHCI << 8) | (l & 0xff));
+
+ pci_read_config_byte(dev, 0x83, &c);
+ c &= 0x7f; /* Lock the writing to PCI_CLASS_REVISION */
+ pci_write_config_byte(dev, 0x83, c);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
+
+static void __devinit quirk_uli5229(struct pci_dev *dev)
+{
+ unsigned short temp;
+ pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO
+ | PCI_COMMAND_MASTER | PCI_COMMAND_INTX_DISABLE);
+ dev->class &= ~0x5;
+ pci_read_config_word(dev, 0x4a, &temp);
+ temp |= 0x1000; /* Enable Native IRQ 14/15 */
+ pci_write_config_word(dev, 0x4a, temp);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
+
+static void __devinit early_uli5249(struct pci_dev *dev)
+{
+ unsigned char temp;
+ pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO
+ | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+ pci_read_config_byte(dev, 0x7c, &temp);
+ pci_write_config_byte(dev, 0x7c, 0x80); /* Unlock R/W control */
+ /* set as pci-pci bridge */
+ pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
+ pci_write_config_byte(dev, 0x7c, temp); /* Lock R/W control */
+ dev->class |= 0x1;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
--
1.5.1
More information about the Linuxppc-dev
mailing list