[PATCH] [POWERPC] Typo fixes interrrupt -> interrupt
Gabriel C
nix.or.die at googlemail.com
Wed Aug 1 13:16:27 EST 2007
Hi,
This patch fixes some interrrupt -> interrupt typos and the comments in it_lp_naca.h
Signed-off-by: Gabriel Craciunescu <nix.or.die at googlemail.com>
---
arch/powerpc/platforms/embedded6xx/holly.c | 2 +-
arch/powerpc/platforms/embedded6xx/linkstation.c | 2 +-
arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c | 2 +-
arch/powerpc/platforms/iseries/it_lp_naca.h | 87 +++++++++++----------
include/asm-ppc/commproc.h | 2 +-
5 files changed, 49 insertions(+), 46 deletions(-)
diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c
index 6292e36..fda16e8 100644
--- a/arch/powerpc/platforms/embedded6xx/holly.c
+++ b/arch/powerpc/platforms/embedded6xx/holly.c
@@ -147,7 +147,7 @@ static void __init holly_setup_arch(void)
}
/*
- * Interrupt setup and service. Interrrupts on the holly come
+ * Interrupt setup and service. Interrupts on the holly come
* from the four external INT pins, PCI interrupts are routed via
* PCI interrupt control registers, it generates internal IRQ23
*
diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index bd5ca58..8c60e02 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -99,7 +99,7 @@ static void __init linkstation_setup_arch(void)
}
/*
- * Interrupt setup and service. Interrrupts on the linkstation come
+ * Interrupt setup and service. Interrupts on the linkstation come
* from the four PCI slots plus onboard 8241 devices: I2C, DUART.
*/
static void __init linkstation_init_IRQ(void)
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index 1e3cc69..25c29bc 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -91,7 +91,7 @@ static void __init mpc7448_hpc2_setup_arch(void)
}
/*
- * Interrupt setup and service. Interrrupts on the mpc7448_hpc2 come
+ * Interrupt setup and service. Interrupts on the mpc7448_hpc2 come
* from the four external INT pins, PCI interrupts are routed via
* PCI interrupt control registers, it generates internal IRQ23
*
diff --git a/arch/powerpc/platforms/iseries/it_lp_naca.h b/arch/powerpc/platforms/iseries/it_lp_naca.h
index 9bbf589..46060bb 100644
--- a/arch/powerpc/platforms/iseries/it_lp_naca.h
+++ b/arch/powerpc/platforms/iseries/it_lp_naca.h
@@ -21,53 +21,56 @@
#include <linux/types.h>
/*
- * This control block contains the data that is shared between the
- * hypervisor (PLIC) and the OS.
+ * This control block contains the data that is shared between the
+ * hypervisor (PLIC) and the OS.
*/
-
struct ItLpNaca {
-// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data
- u32 xDesc; // Eye catcher x00-x03
- u16 xSize; // Size of this class x04-x05
- u16 xIntHdlrOffset; // Offset to IntHdlr array x06-x07
- u8 xMaxIntHdlrEntries; // Number of entries in array x08-x08
- u8 xPrimaryLpIndex; // LP Index of Primary x09-x09
- u8 xServiceLpIndex; // LP Ind of Service Focal Pointx0A-x0A
- u8 xLpIndex; // LP Index x0B-x0B
- u16 xMaxLpQueues; // Number of allocated queues x0C-x0D
- u16 xLpQueueOffset; // Offset to start of LP queues x0E-x0F
- u8 xPirEnvironMode; // Piranha or hardware x10-x10
- u8 xPirConsoleMode; // Piranha console indicator x11-x11
- u8 xPirDasdMode; // Piranha dasd indicator x12-x12
- u8 xRsvd1_0[5]; // Reserved for Piranha related x13-x17
- u8 flags; // flags, see below x18-x1F
- u8 xSpVpdFormat; // VPD areas are in CSP format ...
- u8 xIntProcRatio; // Ratio of int procs to procs ...
- u8 xRsvd1_2[5]; // Reserved ...
- u16 xRsvd1_3; // Reserved x20-x21
- u16 xPlicVrmIndex; // VRM index of PLIC x22-x23
- u16 xMinSupportedSlicVrmInd;// Min supported OS VRM index x24-x25
- u16 xMinCompatableSlicVrmInd;// Min compatible OS VRM index x26-x27
- u64 xLoadAreaAddr; // ER address of load area x28-x2F
- u32 xLoadAreaChunks; // Chunks for the load area x30-x33
- u32 xPaseSysCallCRMask; // Mask used to test CR before x34-x37
- // doing an ASR switch on PASE
- // system call.
- u64 xSlicSegmentTablePtr; // Pointer to Slic seg table. x38-x3f
- u8 xRsvd1_4[64]; // x40-x7F
+/* CACHE_LINE_1 0x0000 - 0x007F Contains read-only data */
+ u32 xDesc; /* Eye catcher x00-x03 */
+ u16 xSize; /* Size of this class x04-x05 */
+ u16 xIntHdlrOffset; /* Offset to IntHdlr array x06-x07 */
+ u8 xMaxIntHdlrEntries; /* Number of entries in array x08-x08 */
+ u8 xPrimaryLpIndex; /* LP Index of Primary x09-x09 */
+ u8 xServiceLpIndex; /* LP Ind of Service Focal Pointx0A-x0A */
+ u8 xLpIndex; /* LP Index x0B-x0B */
+ u16 xMaxLpQueues; /* Number of allocated queues x0C-x0D */
+ u16 xLpQueueOffset; /* Offset to start of LP queues x0E-x0F */
+ u8 xPirEnvironMode; /* Piranha or hardware x10-x10 */
+ u8 xPirConsoleMode; /* Piranha console indicator x11-x11 */
+ u8 xPirDasdMode; /* Piranha dasd indicator x12-x12 */
+ u8 xRsvd1_0[5]; /* Reserved for Piranha related x13-x17 */
+ u8 flags; /* flags, see below x18-x1F */
+ u8 xSpVpdFormat; /* VPD areas are in CSP format ... */
+ u8 xIntProcRatio; /* Ratio of int procs to procs ... */
+ u8 xRsvd1_2[5]; /* Reserved ... */
+ u16 xRsvd1_3; /* Reserved x20-x21 */
+ u16 xPlicVrmIndex; /* VRM index of PLIC x22-x23 */
+ u16 xMinSupportedSlicVrmInd; /* Min supported OS VRM index x24-x25 */
+ u16 xMinCompatableSlicVrmInd; /* Min compatible OS VRM index x26-x27 */
+ u64 xLoadAreaAddr; /* ER address of load area x28-x2F */
+ u32 xLoadAreaChunks; /* Chunks for the load area x30-x33 */
+ u32 xPaseSysCallCRMask; /* Mask used to test CR before x34-x37 */
+ /* doing an ASR switch on PASE */
+ /* system call. */
+ u64 xSlicSegmentTablePtr; /* Pointer to Slic seg table. x38-x3f */
+ u8 xRsvd1_4[64]; /* x40-x7F */
-// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data
- u8 xRsvd2_0[128]; // Reserved x00-x7F
+/* CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data */
+ u8 xRsvd2_0[128]; /* Reserved x00-x7F */
-// CACHE_LINE_3-6 0x0100 - 0x02FF Contains LP Queue indicators
-// NB: Padding required to keep xInterrruptHdlr at x300 which is required
-// for v4r4 PLIC.
- u8 xOldLpQueue[128]; // LP Queue needed for v4r4 100-17F
- u8 xRsvd3_0[384]; // Reserved 180-2FF
+/*
+ * CACHE_LINE_3-6 0x0100 - 0x02FF Contains LP Queue indicators
+ * NB: Padding required to keep xInterruptHdlr at x300 which is required
+ * for v4r4 PLIC.
+ */
+ u8 xOldLpQueue[128]; /* LP Queue needed for v4r4 100-17F */
+ u8 xRsvd3_0[384]; /* Reserved 180-2FF */
-// CACHE_LINE_7-8 0x0300 - 0x03FF Contains the address of the OS interrupt
-// handlers
- u64 xInterruptHdlr[32]; // Interrupt handlers 300-x3FF
+/*
+ * CACHE_LINE_7-8 0x0300 - 0x03FF Contains the address of the OS interrupt
+ * handlers
+ */
+ u64 xInterruptHdlr[32]; /* Interrupt handlers 300-x3FF */
};
extern struct ItLpNaca itLpNaca;
diff --git a/include/asm-ppc/commproc.h b/include/asm-ppc/commproc.h
index 3972487..462abb1 100644
--- a/include/asm-ppc/commproc.h
+++ b/include/asm-ppc/commproc.h
@@ -681,7 +681,7 @@ typedef struct risc_timer_pram {
#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
-#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */
+#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
More information about the Linuxppc-dev
mailing list