[PATCH 1/5 v3] Add the explanation and a sample of RapidIO OF node to the document of booting-without-of.txt file.

[Segher Boessenkool]

> +   l) RapidIO

"FSL PowerPC bridge RapidIO" or something like that -- you
aren't doing a _generic_ rapidio binding here.

> +   RapidIO is a definition of a system interconnect. This node add
> +   the support for RapidIO processor in kernel. The node name is
> +   suggested to be 'rapidio'.
> +
> +   Required properties:
> +
> +    - compatible : Using "fsl,rapidio-delta" for Freescale PowerPC
> +      RapidIO controller.
> +    - #address-cells : Address representation for "rapidio" devices.
> +      This field represents the number of cells needed to represent
> +      the RapidIO address of the registers.
> +      See 1) above for more details on defining #address-cells.
> +    - reg : Offset and length of the register set for the device
> +    - ranges : Should be defined as specified in 1) to describe the
> +      translation of addresses for memory mapped RapidIO memory
> +      space.
> +    - interrupts : binding interrupts for this device node,
> +      please follow below orders:
> +      <err_irq bell_outb_irq bell_inb_irq msg1_tx_irq msg1_rx_irq
> +      msg2_tx_irq msg2_rx_irq ... msgN_tx_irq msgN_rx_irq>.

_All_ of these are "as specified in 1)".  You should be saying
the specifics for your device here; for example, what register
blocks of your controller are described in "reg", and in what
order?


Segher