[PATCH 4/10] Re-organize Kconfig code for 4xx in arch/powerpc
David Gibson
david at gibson.dropbear.id.au
Wed Apr 18 16:36:26 EST 2007
Now that we always take a device tree in arch/powerpc, there's no good
reason not to allow a single kernel to support multiple embedded 4xx
boards - the correct platform code can be selected based on the device
tree information.
Therefore, this patch re-arranges the 4xx Kconfig code to allow this.
In addition we:
- use "select" instead of depends to configure the correct
config options for specific 4xx CPUs and workarounds, which
makes the information about specific boards and CPUs less
scattered.
- Some old, unused (in arch/powerpc) config options are
removed: WANT_EARLY_SERIAL, IBM_OCP, etc.
Signed-off-by: David Gibson <dwg at au1.ibm.com>
---
arch/powerpc/platforms/4xx/Kconfig | 378 ++++++++++++++-----------------------
1 file changed, 153 insertions(+), 225 deletions(-)
Index: working-2.6/arch/powerpc/platforms/4xx/Kconfig
===================================================================
--- working-2.6.orig/arch/powerpc/platforms/4xx/Kconfig 2007-02-21 11:20:50.000000000 +1100
+++ working-2.6/arch/powerpc/platforms/4xx/Kconfig 2007-02-21 11:25:43.000000000 +1100
@@ -3,278 +3,206 @@ config 4xx
depends on 40x || 44x
default y
-config WANT_EARLY_SERIAL
+config BOOKE
bool
- select SERIAL_8250
- default n
-
-menu "AMCC 4xx options"
- depends on 4xx
-
-choice
- prompt "Machine Type"
- depends on 40x
- default WALNUT
-
-config BUBINGA
- bool "Bubinga"
- select WANT_EARLY_SERIAL
- help
- This option enables support for the IBM 405EP evaluation board.
-
-config CPCI405
- bool "CPCI405"
- help
- This option enables support for the CPCI405 board.
-
-config EP405
- bool "EP405/EP405PC"
- help
- This option enables support for the EP405/EP405PC boards.
-
-config REDWOOD_5
- bool "Redwood-5"
- help
- This option enables support for the IBM STB04 evaluation board.
-
-config REDWOOD_6
- bool "Redwood-6"
- help
- This option enables support for the IBM STBx25xx evaluation board.
-
-config SYCAMORE
- bool "Sycamore"
- help
- This option enables support for the IBM PPC405GPr evaluation board.
-
-config WALNUT
- bool "Walnut"
- help
- This option enables support for the IBM PPC405GP evaluation board.
-
-config XILINX_ML300
- bool "Xilinx-ML300"
- help
- This option enables support for the Xilinx ML300 evaluation board.
-
-endchoice
-
-choice
- prompt "Machine Type"
depends on 44x
- default EBONY
-
-config BAMBOO
- bool "Bamboo"
- select WANT_EARLY_SERIAL
- help
- This option enables support for the IBM PPC440EP evaluation board.
-
-config EBONY
- bool "Ebony"
- select WANT_EARLY_SERIAL
- help
- This option enables support for the IBM PPC440GP evaluation board.
-
-config LUAN
- bool "Luan"
- select WANT_EARLY_SERIAL
- help
- This option enables support for the IBM PPC440SP evaluation board.
-
-config OCOTEA
- bool "Ocotea"
- select WANT_EARLY_SERIAL
- help
- This option enables support for the IBM PPC440GX evaluation board.
+ default y
-endchoice
+menu "AMCC 40x options"
+ depends on 40x
-config EP405PC
- bool "EP405PC Support"
- depends on EP405
+#config BUBINGA
+# bool "Bubinga"
+# depends on 40x
+# default n
+# select 405EP
+# help
+# This option enables support for the IBM 405EP evaluation board.
+
+#config CPCI405
+# bool "CPCI405"
+# depends on 40x
+# default n
+# select 405GP
+# help
+# This option enables support for the CPCI405 board.
+
+#config EP405
+# bool "EP405/EP405PC"
+# depends on 40x
+# default n
+# select 405GP
+# help
+# This option enables support for the EP405/EP405PC boards.
+
+#config EP405PC
+# bool "EP405PC Support"
+# depends on EP405
+# default y
+# help
+# This option enables support for the extra features of the EP405PC board.
+
+#config REDWOOD_5
+# bool "Redwood-5"
+# depends on 40x
+# default n
+# select STB03xxx
+# help
+# This option enables support for the IBM STB04 evaluation board.
+
+#config REDWOOD_6
+# bool "Redwood-6"
+# depends on 40x
+# default n
+# select STB03xxx
+# help
+# This option enables support for the IBM STBx25xx evaluation board.
+
+#config SYCAMORE
+# bool "Sycamore"
+# depends on 40x
+# default n
+# select 405GPR
+# help
+# This option enables support for the IBM PPC405GPr evaluation board.
+
+#config WALNUT
+# bool "Walnut"
+# depends on 40x
+# default y
+# select 405GP
+# help
+# This option enables support for the IBM PPC405GP evaluation board.
+
+#config XILINX_ML300
+# bool "Xilinx-ML300"
+# depends on 40x
+# default y
+# select VIRTEX_II_PRO
+# help
+# This option enables support for the Xilinx ML300 evaluation board.
+endmenu
-# It's often necessary to know the specific 4xx processor type.
-# Fortunately, it is impled (so far) from the board type, so we
-# don't need to ask more redundant questions.
+# 40x specific CPU modules, selected based on the board above.
config NP405H
bool
- depends on ASH
- default y
+ #depends on ASH
-config 440EP
+# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
+config 403GCX
bool
- depends on BAMBOO
- select PPC_FPU
- default y
+ #depends on OAK
+ select IBM405_ERR51
-config 440GP
+config 405GP
bool
- depends on EBONY
- default y
+ select IBM405_ERR77
+ select IBM405_ERR51
-config 440GX
+config 405EP
bool
- depends on OCOTEA
- default y
-config 440SP
+config 405GPR
bool
- depends on LUAN
- default y
-config 440
+config VIRTEX_II_PRO
bool
- depends on 440GP || 440SP || 440EP
- default y
+ select IBM405_ERR77
+ select IBM405_ERR51
-config 440A
+config STB03xxx
bool
- depends on 440GX
- default y
+ select IBM405_ERR77
+ select IBM405_ERR51
-config IBM440EP_ERR42
- bool
- depends on 440EP
- default y
+# 40x errata/workaround config symbols, selected by the CPU models above
# All 405-based cores up until the 405GPR and 405EP have this errata.
config IBM405_ERR77
bool
- depends on 40x && !403GCX && !405GPR && !405EP
- default y
# All 40x-based cores, up until the 405GPR and 405EP have this errata.
config IBM405_ERR51
bool
- depends on 40x && !405GPR && !405EP
- default y
-config BOOKE
- bool
+menu "AMCC 44x options"
depends on 44x
- default y
-config IBM_OCP
- bool
- depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
- default y
+#config BAMBOO
+# bool "Bamboo"
+# depends on 44x
+# default n
+# select 440EP
+# help
+# This option enables support for the IBM PPC440EP evaluation board.
-config XILINX_OCP
- bool
- depends on XILINX_ML300
- default y
-
-config IBM_EMAC4
- bool
- depends on 440GX || 440SP
- default y
-
-config BIOS_FIXUP
- bool
- depends on BUBINGA || EP405 || SYCAMORE || WALNUT
- default y
-
-# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
-config 403GCX
- bool
- depends on OAK
- default y
-
-config 405EP
- bool
- depends on BUBINGA
- default y
-
-config 405GP
- bool
- depends on CPCI405 || EP405 || WALNUT
- default y
-
-config 405GPR
- bool
- depends on SYCAMORE
- default y
-
-config VIRTEX_II_PRO
- bool
- depends on XILINX_ML300
- default y
-
-config STB03xxx
- bool
- depends on REDWOOD_5 || REDWOOD_6
- default y
-
-config EMBEDDEDBOOT
- bool
- depends on EP405 || XILINX_ML300
+config EBONY
+ bool "Ebony"
+ depends on 44x
default y
+ select 440GP
+ help
+ This option enables support for the IBM PPC440GP evaluation board.
-config IBM_OPENBIOS
- bool
- depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
- default y
+#config LUAN
+# bool "Luan"
+# depends on 44x
+# default n
+# select 440SP
+# help
+# This option enables support for the IBM PPC440SP evaluation board.
+
+#config OCOTEA
+# bool "Ocotea"
+# depends on 44x
+# default n
+# select 440GX
+# help
+# This option enables support for the IBM PPC440GX evaluation board.
-config PPC4xx_DMA
- bool "PPC4xx DMA controller support"
- depends on 4xx
+endmenu
-config PPC4xx_EDMA
+# 44x specific CPU modules, selected based on the board above.
+config 440EP
bool
- depends on !STB03xxx && PPC4xx_DMA
- default y
+ select PPC_FPU
+ select IBM440EP_ERR42
-config PPC_GEN550
+config 440GP
bool
- depends on 4xx
- default y
-
-choice
- prompt "TTYS0 device and default console"
- depends on 40x
- default UART0_TTYS0
-
-config UART0_TTYS0
- bool "UART0"
-
-config UART0_TTYS1
- bool "UART1"
+ select IBM_NEW_EMAC_ZMII
-endchoice
-
-config SERIAL_SICC
- bool "SICC Serial port support"
- depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
+config 440GX
bool
- depends on SERIAL_SICC && UART0_TTYS1
- default y
-config SERIAL_SICC_CONSOLE
+config 440SP
bool
- depends on SERIAL_SICC && UART0_TTYS1
- default y
-endmenu
-
-menu "IBM 40x options"
- depends on 40x
-
-config SERIAL_SICC
- bool "SICC Serial port"
- depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
+config 440A
bool
- depends on SERIAL_SICC && UART0_TTYS1
+ depends on 440GX
default y
-config SERIAL_SICC_CONSOLE
+# 44x errata/workaround config symbols, selected by the CPU models above
+config IBM440EP_ERR42
bool
- depends on SERIAL_SICC && UART0_TTYS1
- default y
-endmenu
+#config XILINX_OCP
+# bool
+# depends on XILINX_ML300
+# default y
+
+#config BIOS_FIXUP
+# bool
+# depends on BUBINGA || EP405 || SYCAMORE || WALNUT
+# default y
+
+#config PPC4xx_DMA
+# bool "PPC4xx DMA controller support"
+# depends on 4xx
+
+#config PPC4xx_EDMA
+# bool
+# depends on !STB03xxx && PPC4xx_DMA
+# default y
More information about the Linuxppc-dev
mailing list